Search the Community

Hi, is there a EZDOK Camera file for the 737NG Thanks Jan

Title says it all - using Thrustmaster Hotas Warthog (love it), EZDOK, PMDG737NGX, FSUIPC Registered 4.x.Have the Squeeze lever on the WH configured to cycle through the three camera categories in EZ DOK. After squeezing it a couple of times, invariably my Auto Pilot disconnects, the klaxxon horn sounds, and I cannot seem to figure out why this is happening.I just added LINDA to control the 737NGX, works a treat. The squeeze lever button on the joystick is NOT assigned to anything in Linda. I -may- possibly have configured it a week or so back to do something in FSX but I can't recall. WHen I installed LINDA, I had to delete the Button Controls from the FSX Modules\Controls HTML file. I have that button configured to swap cameras in EZ DOK.I'm willing to bet someone with a Warthog may have a possible clue how I can troubleshoot this, thus I'm asking for advice, please. Thank you!Robert

Yesterday my P3D installation messed up in the way it is stuck in very low FPS, we are talking about as low as 0.6 frames per second. No matter what I have done to remedy the issue it is stuck in crappy frames and I've tried everything. It lags on the ground but as soon as I pause the sim my fps returns to normal. It also lags as soon as I take off and start flying.This started after I installed the FSLabs A319 latest version for P3D v4, I was doing preflight when all of the sudden my framerate dropped to 3-4. I tried to wait it out but then it kept going, then I restarted my sim but it still lagged now it was down between 1-2 frames now. With this framerate it is unplayable.I have done some experiments so far and I have noticed a few things.- When AI traffic especially airport ground vehicles is turned off then the framerate returns to normal on the ground but when airborne it lags down to 1 frame per second. By pausing the sim it returns to normal, but as soon as its unpaused then it no longer works. - Complex aircraft such as the PMDG 747 loads fine all systems initialize properly, however as soon as I switch out to the external view the sim freezes then becomes unresponsive. Once it does become unresponsive again then it down to 1 frame per second.The sim is currently unflyable at this state, I have deleted the p3d.cfg file and it helped but as soon as I change ANY of the traffic settings it lags down again. The only way to fly the sim is with ALL AI traffic off, so I thought it may have been a few addons I have installed.One of them is the A_A Sceneries Suvarnabhumi Intl Airport, sadly this is not P4D compatible yet and stupid me decided to install that & the AI traffic installer that comes with it. The AI installer ended up adding a bunch of planes and changing the AI flight plans themselves. So the first thing I did was uninstall the scenery (since it kept crashing) and the AI traffic manager that it came with.I also noticed I had AI FSLights Reborn, uninstalled that but to no avail. Then I thought the ground vehicles were corrupted so then what I did was uninstall the ones I had from REX Worldwide Airports HD and restore the default ones I had before, but still nothing.Then while the sim was lagging I was monitoring task manager and I noticed both my CPU is down below 20% and my GPU usage is almost 0%.So then I went through the regular troubleshooting steps for P3D, Here is what I have tried so far:- Deleting the generated files such as Prepar3D.cfg, cameras.cfg, and shader caches (Didnt help) - Deleting/disabling all addons including LSH MD-80, PMDG aircrafts, AS P4D, ASCA, and EZDok. (Didnt help) - Repairing then reinstalling both the client & content from their installers. (Didnt help) - Reinstalling P3D completely (Didnt help) - Repairing all microsoft redistributables (Didnt help) - Updating my graphics driver to latest versions (Didnt help) - Running a AV scan with norton (Didnt help)I am not sure if maybe I got a virus that is interfering with P3D, if I had to guess it must have come from the FSL A319 since I never had any problems with the sim until now.Here are my specs, it's an MSI gaming laptop I have never had any issue playing games. I have Arma 3 and X-Plane 11 installed on it and they work fine, its only P3D that has this issue.Hardware:- NVIDIA GTX 1070 with 8 GB of VRAM- Intel i7-7700 @ 2.6 GHZ (overclocked by default to 3.4 GHZ)- SSD 125 GB- HDD 1 TB, 7000 RPM (this is where P3D is installed since I can't fit it into the C drive)Software:- Prepar3D v4.4- Active Sky for P3D v4- EZDOK P4D beta (uninstalled)- PTA for P3D v4- FS AI Lights Reborn (uninstalled)- Leonardo Maddog MD-82 & MD-83/88- PMDG 777-200LR/300ER- PMDG 747-400/800- FS2Crew for boththe 747 & MD-80- TFDI 717- FSLabs A320/A319 (Uninstalled)Addon Scenery:- Imagine Sim KATL (P4D)- Flightbeam KSFO (P4D)- Flightbeam KDEN (P4D)- LatinVFR KRSW (P4D)- A_A Sceneries VHHH (P4D)- Kansai Airport (P4D)I have also tried regenerating the scenery.cfg but again it still lags.If this is malware, can anyone recommend the best AV to remove it? I don;t know what to do I have tried EVERYTHING in the book, I will give more information if requested if that will help with this issue. Please help, PLEASE its been stressing me out the past day and nothing I have done is helping.

Hi there, I hoped it is just a very odd issue, that FSX-SE won't start in full screen mode after EZCA 2 launches, but I had to realize it is true. Ather that I found a line in FSX.cfg under the [MAIN] tab, calls "Maximized=" and I set it's value to 2. EZCA or FSX always writes this value back to "1". My FSX starts in an ugly small window every time. I have no luck, and yes full screen is feezing when I hit shift+D (show EZCA window). Other problem, I found the HAT switch movement laggy (slow) and I decided to turn it off back to basic FSX settings and I failed, totally impossible.

Hello, I would like to know if there is a general agreement on this or not: Given: FSX three-monitors (Nvidia surround) EzDok TrackIr5 no proper home-built cockpit, just few Saitek panels requirement to fly different GA models (so cannot be hyper-tuned on one model only) Which setup would you adopt and why? VC extending on the three monitors (surround with bazels) + EzDok for positions in cockpit + TrackIr to move eye direction VC extending on the three monitors (surround with bazels) + EzDok for positions in cockpit, but no TrackIR so that views on each monitor stays the same (i.e. central monitor always showing front view, right monitor always show right view, etc) VC on central monitor only + EzDok for positions in cockpit, but no TrackIR, + right fixed view on right monitor and left view on left monitor no VC at all. Fixed front view on central monitor, fixed left on left, fixed right on right. I know that #4 is very old-school, and that #1 is the most popular, but I would like to know if anybody prefers #2 or #3 and why. I fly exclusively GA (no airliners), bot VFR and IFR, but I don't think that matters to the main question. Cheers

Hallo zusammen Vielleicht kann mir ja hier einer helfen. Ich versuche vergeblich die Software EZDok ans laufen zu bekommen. Ich habe recht gute Sachen in anderen Foren gesehen wie mann es installiert etc. Ich gehe genau so vor aber nichts.Ich habe in FSX die k/board Sachen entfernt und versucht es ans laufen zu bekommen. Keine der Kameras tut was sie soll.Gibt es irgendwo eine klasse beschreibun um das ans laufen zu bekommen Vielen Dank im vorausGruesse aus SchottlandIan