Search the Community
Showing results for tags 'afcad'.
Found 8 results
-
Another problem was discovered when using RC4, although I don't think this is an RC4 issue. I noticed the other day that RC4 did not give me Rwy 10 for departing KORD, so went to request the Rwy and it wasn't listed in the RC4 menu! I did my flight, then went to the rc4.csv file and, sure enough, Rwy 10 and 28 were not listed. I checked to make sure my makerunways was current, which it was. It had been run right after I installed my FSDreamteam sceneries into P3D. Next, I opened the runway.txt file and searched for 'Airport KORD'. Only the default airport is listed. I clicked 'Find Next' and no other KORD was detected. I did the same with KDFW and, once again, only the default KDFW was listed. I opened the KORD AFCAD file in ADE and Rwy 10-28 is in fact there, so for some reason the KORD and KDFW AFCADs are not being read. Now, the names of the AFCAD files are AP_KORD.bgl and AP_KDFW.bgl. I don't know if the names of the files are causing the issue or not. Todd
- 12 replies
-
- makerunways
- fsdreamteam
-
(and 1 more)
Tagged with:
-
Hello to everybody! I've got a small problem which i don't seem to get a proper solution for, and believe me i searched on every flightsim forum possible to try to get a solution, and nothing seems to come up. I'm pretty sure the solution is so simple, that it's breaking my head for days... (The most frustrating part is that i dont get this in any other airport, JUST LEBB! Before i didnt had this case, i've been flying in and out of LEBB for quite a few times. To answer your hidden question: Yes, i know how to land with ILS...) Here we go: As i approach LEBB, i get ILS RWY 30 Approach from ATC. (4.400 is the ILS intercept altitude for this airport.) I hear the morse code from the ILS, (Frequency is 110.30) as it's activated in NAV1 on my radio. Then it comes, the 'pink diamond' on the right 'comes down' slowly, (approach speed as normal 148-152 knots, Flaps 30 - Boeing 737-800) reaches the center, but doesn't turn off my ALT-knob!! Then the 'pink diamond' falls all the way down, and ILS approach is screwed up. So in the end the ILS RWY 30 Approach changes into a Visual Approach. My Question now is: How to fix this? What goes wrong? Why ILS RWY30 doesn't turn off my ALT-knob so i can do a normal ILS approach as in for ex. LEBL, LEVC, LECO, LEST or any other airport in the world? For all of you professional i leave you down here my AFCAD behind, which i changed just a little to add an ILS Approach to RWY 10, which offcourse in real-life doesn't exist because of the mountains around LEBB airport. (The problem existed though before i added this ILS Approach) Here is the official AFCAD (+ ILS RWY 10) from Tropicalsim (zipped): http://www.4shared.com/zip/ENX4jG4R/AF2_LEBB.html I'm completely desperate, because, as i said, it might be such a easy solution, but maybe i'm not able to see it. ("Can't see the trees because there's a forest in front", we would say in Holland...) Anyone who could provide me with a solution or better, send me back the AFCAD and kick my "rear end" for having missed out something important, is welcome. (Be gentle and respectfull, though...) Big shouts out to everyone on this forum, you guys are the ones that make the troubleshooting part of the flightsimming a headache less, and together we're more worth: All for one, One for All! Thanks in advance, Keep up the Good Work, Grtz, Co-Pilot Diego
-
Greetings, I've been using FS9 for ages and always modify my AFCADs to my liking. I have run into this problem before, but can not remember how I fixed it. Had to do a HD format and re-install of Windows after several years of FS9 use, so I dont remember all the tweaks I used to know. I use mostly payware airports. Every time I modify the AFCAD that installed with the scenery the default terminal buildings show up afterwards. I do not use AI traffic that installs it's own AFCADs. I use WoAI only. I have done sweeps to ensure that no other 3rd party AFCAD is present. If I remove the stock AFCAD that installed with FS9 originally, the problem goes away. But, I dont want to do that because dozens of surrounding airports will not have an AFCAD. If I re-install the new airport, everything is fine. As soon as I modify the AFCAD (in any way) and then save it, the default terminal buildings show up. This has happened with all of T2G products, some FSDreamTeam products....those are the only ones that I've noticed it on so far. So, it does not matter what company made the software....its gotta be a layer issue. It does not matter where the scenery is in the scenery library, still happens. If I reinstall the scenery all is well (but Im stuck with an unmodified AFCAD which is a no-go for me). Any insight would be helpful.
- 3 replies
-
- afcad
- default buildings
-
(and 2 more)
Tagged with:
-
Ok, I'm sure this topic has been posted before i just cant seem to find it. I have downloaded and added a number of third party scenery offerings over time with really no issues, however, lately I have encountered two separate new 3rd part airport scenery paks I downloaded, that "AI Flight Planner" has eventually identified, but FSX-SE has not. I have tried everything I know and FSX-SE still do not show these airports in the (FREE FLIGHT - SELECT AIRPORT) window. I actually viewed and edited each of these airport files in AFCAD and saved successfully. AI Flight Planner see's them, FSX-SE does not!! I know this fix is simple and right in front of me , but, I DO NOT SEE IT! HELP!! Thank you in advance, sws56
-
- Add-on
- 3rd party airport
-
(and 2 more)
Tagged with:
-
Title of this post might be slightly misleading however I have been doing a lot of flying in and out of Gatwick (EGKK) which was once (not sure if it still is) the busiest single runway airport in the world. Something occurred to me: not once on final, arriving at various periods of the day, has there been ai queuing at the hold short point to take off once I have landed. This struck me as odd. I fly using Radar Contact and AI Smooth, along with Active Sky. AI moves normally when I am taking off, and a little while after I have landed. My question is this – is AI Smooth, or Radar Contact preventing movement on the ground whilst I am on the approach? Is there anyway to lessen the effect of this if so? Or is something else affecting ai departures? I'd love to see a queue of departing AI when I am landing. I am sure someone out there must have an idea? Thanks in advance
- 7 replies
-
- radar contact
- aismooth
-
(and 1 more)
Tagged with:
-
OK, I am at a loss to determine what is causing this CTD with NTDLL always being the guilty party: Description Faulting Application Path: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe Problem signature Problem Event Name: APPCRASH Application Name: fsx.exe Application Version: 10.0.61637.0 Application Timestamp: 46fadb14 Fault Module Name: ntdll.dll Fault Module Version: 6.1.7601.18229 Fault Module Timestamp: 51fb1072 Exception Code: c0000005 Exception Offset: 0002e41b OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Extra information about the problem LCID: 1033 It seems NTDLL was update on 9/11/13 and the only updates were the following Window updates: If anyone can give me a clue on what to look for it would be appreciated. At first I thought it was related to Simconnect but after deinstalling add-ons and reflying the same flight plan (different aircraft) and getting the same CTD I eliminated Simconnect as a problem. Could one of the Windows updates be causing many of us the same CTD with NTDLL.DLL? THANKS!!!!!!!!!
- 4 replies
-
- ntdll
- simconnect
-
(and 1 more)
Tagged with:
-
Hi everyone, last week I bought the PKSIM SKBO, overall a great airport. My problem is that when I opened GSX it didn't recognized it as an airport, and also when I was looking for the AFCAD to change airline parkings, I couldn't find it anywhere, I uninstalled it, downloaded the newest installer, but I still can find the AFCAD, tried to install it on another PC, but still. (I have P3D V4.5 btw), I contacted the support email of PKSIM but no answer in more than a week. So if anyone could please help me to locate the AFCAD I would really appreciate, Thanks!