Search the Community
Showing results for tags 'fsx se'.
Found 16 results
-
Help! I purchased the Carenado DA62, as it has fully updated navigraph compatibility (as a real G1000 operator, I can say it's harder to enter waypoints in this sim than the real thing). Essentially, it's painstaking to try and enter the waypoints into the Carenado G1000if there's more than a few of them, and the interraction with selecting deps/arrivals and waypoints is completely backwards compared to the real thing. Question - Is there any way to download a simbrief flight plan into it? - similar to how you would with an Aerosoft Airbus for example? I can't see any Carenado options in the export/download list? I tried exporting as an FSX flight plan and uploading it through flight planner - but this doesn't actually upload the route, just the origin and destination I'm running FSX SE and have a full navigraph subscription Thanks Chris
- 2 replies
-
- navigraph
- carenado da62
- (and 6 more)
-
Hello guys, I just got chase plane maybe 2 weeks ago, very cool program and thanks for this!! now I have a simple question, when I'm setting up my inside views I been decreasing the view to 0.60 or 0.70 depending on the aircraft since if I don't do this the cockpit will not look to real, now for the outside im using mostly 1.00, can anybody share what's maybe the most realist view compared to reality? I hope im explaining properly but when I say increase or decrease im referring to the measures that show on the top right of the screen, not sure how to call this. Thanks for any help.
- 2 replies
-
- chaseplane
- fsx se
-
(and 1 more)
Tagged with:
-
Hello again. I am sure this is likely to start a debate amongst fans of each product, but what is currently the "best" AI traffic addon for use with FSX SE? It seems like the main competitors are My Traffic and UT2. Anyone have any insight or suggestions? Thanks.
-
Hi! I have fsx se, and I NEEEED! DESPERATE of the 2.17 version of fsrecorder. My computer isn't fast, but I want to make as real as it gets videos... But since I can only use 1.331 (I think) In SE, IT doesn't have a render feature! I need those crucial frames! Please, can I have an alternative? NOT A SCREEN RECORDER THOUGH! But a flight sim recorder, that can render, or at least a software that can put those missing frames in there(No, I will not use Razer Cortex, so don't mention it please). On another note, sorry for using caps. I am just so sad and my emotions are sometimes out of control... Forgive me Jim, and other staff/mods of Avsim!
-
Hello guys, 1st let me clarify I like chase plane and I been using it for over a month, now today I had an issue, takeoff, cruise all normal, as soon as I start descending I started to hear the Cpu alert so I knew something was going to happen, I was on the PMDG NGX and as soon as I was on final my panel basically stopped working, every display stopped then more and more the alert, i was able to touch down not knowing if my flaps were down or my gear, right at reverse thrust the FSX crashed to desktop, my pc is not bad I think, please guys how can I prevent that?? I have the option to use any Cpu available and never gad this before, please help, I really like chase plane but this was disappointed today after been on the computer for over 2 hours flying, see bellow my specs and the flight, thanks for any answers. NGX EHAM (FLYTAMPA) TO EKCH (FLYTAMPA) Specs i7 6700K 4.0 Processor GTX1070 16RAM 2TB space 124 SSD Windows 10 64bit
- 5 replies
-
- fsx se
- chase plane
-
(and 1 more)
Tagged with:
-
Hello guys, im a FSX SE user and chase plane has been very cool so far, I have a question, after finding a good deal im buying a new pc tomorrow and I would like to know since I made over 8 aircrafts already, how or whats the procedure to save my presets of chase? I don't want to do all of them again lol thanks for any help.
- 3 replies
-
- chaseplane
- chase
-
(and 2 more)
Tagged with:
-
I recently "upgraded" to FSX SE and added a lot of Mega Scenery states with no issues. I really want to add aircraft as well, mainly commercial, but a few civil as well. 1. Can MS FSX aircraft add ons work in SE version? 2. Can both versions install on same machine at same time, and be handled as separate files for future mods? 3. Tried to install Gold Version FSX, but got "error occurred" message. The SE version runs consistently 40+ FPS no matter how high I set detail levels, plenty of horsepower in my set up. Just wish I had that much horsepower in my technical skills. Thanks Bob
-
Anyone have this working with FSX SE? Have the latest FSUIPC but ATM does not connect.
-
FSX-MS FSX Gold Edition not available on DVD any more?
IFR7700 posted a topic in MS FSX | FSX-SE Forum
I bought my FSX Gold Edition DVDs from newegg in 2011 for $28.26. I ran it on a modest machine (AMD 965 black edition). I then upgraded to a more robust machine (mainly because I kept buying high end add ons), and had no trouble reactivating FSX on my intel 3770K Ivy bridge. I recently decided to upgrade again and have collected all the parts and pieces to build a 4920K on an ASUS z97 deluxe motherboard. For some reason, it occurred to me to check on any reactivation issues, and sure enough, MS will only issue 2 activation approvals on 2 different machines. If you try to activate it a 3rd time on a third motherboard, it will not be successful. Being staunchly anti-pirate, cracking, hacking, etc. I decided to purchase FSX Gold again. It is not available from any reputable dealers that I can find. Questionable dealers are trying to sell the software for upwards of $150.00. What is going on? Is this due to Steam? This is scary, because steam can someday just stop it's FSX gaming. I like having my DVD for apacolyptic scenarios. I need some guidance. Or am I just confused about Steam? Thanks, Dennis P.S. Where are these tags? -
Hello guys, my friend is having this problem. Unfortunately he does not speak English, so I am writing you on his behalf. We are experiencing following error If we hit Yes (ano). Then CTD immediately follows. Here is error log. It is in Czech, but it is pointing out to the faulty ai_player.dll library. Název chybující aplikace: fsx.exe, verze: 10.0.62615.0, časové razítko: 0x559f9a9a Název chybujícího modulu: ai_player.dll, verze: 10.0.62615.0, časové razítko: 0x559f9ab4 Kód výjimky: 0xc0000005 Posun chyby: 0x00036099 ID chybujícího procesu: 0x12cc Čas spuštění chybující aplikace: 0x01d1d7a86e94980b Cesta k chybující aplikaci: D:\Program Files (x86)\Steam\steamapps\common\FSX\fsx.exe Cesta k chybujícímu modulu: D:\Program Files (x86)\Steam\steamapps\common\FSX\ai_player.dll ID zprávy: 0fd62eaf-5f73-4cec-9f51-e373cc8c9d55 Úplný název chybujícího balíčku: ID aplikace související s chybujícím balíčkem: I will translate some parts of the log if needed. We would like to avoid reinstall of the FSX because it is filled with addons. Thanks for your help
-
So I recently got my computer back after several weeks of not using it, and when I booted up my first flight this month, the scenery was horribly corrupted. I have no idea what is causing this as it was fine several weeks ago. What could be wrong? http://prnt.sc/dknac7
-
Hello. I have purchased the effects program, and I am using on FSX SE. Install goes smoothly, however when using the config program only FSX is available. FSX SE (and P3D) remain grayed out. Any ideas on a fix or workaround?
-
hello everyone, i have been having this problem recently where when every i turn my yoke the left or push the the red button on the bottom left side of the yoke it turns my camera angle to the left and just keeps turning until I stop turning left or stop pushing the bottom button really gets annoying especially final, sometimes it even makes me crash. so i was just wondering if anyone knew a solution to this problem. I have checked my bindings and everything seems fine. so please if you have a solution please help. Evan,
-
Hello guys, I have a minor issue with my FSX SE, let me explain this maybe the best way possible, for example I do a flight and all good, after I exit out the sim and lets say I stay on the computer doing something else the sim stays open apparently, if I want to go back and open it will give me a message saying fsx se is already open, any reason or solution for this??? the only way I can shut it down is either restarting the pc or using the task manager, please let me know thanks in advance.
-
I was running EFB very well with FSX, until I had a system problem that required me to uninstall FSX completely. I re-installed with FSX SE, and began to re-install all of my prior FSX apps. Haven't had any problems, until I got to Aivlasoft's EFB. I cannot get the data provider to run...it installed and did it's initial construction, and at the end it crashed. The reason I'm posting up here is that the Aivlasoft forum seems to be putting the onus of solving the problem on other users - a typical reply from the Aivlasoft crew says (in effect), "Why don't you look up the error and see what's wrong?" It seems that they have no idea how to deal with this. Anyway, here is my post from their forum and the error I keep getting: I completely removed FSX and all of its components and re-installed FSX SE. I was running EFB on two computers (both running Win7/64), and all was running fine. Now, however, the data provider will not install - it looks good and runs through all of its paces, but at the end, ir crashes, with the enclosed message. Since I am running Win7, the docs say that I am already running .Net framework 3.5, so I don't think that's the problem, but here's the rest of the data from the box: ************** Exception Text ************** System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E) at bh.c(Object A_0, EventArgs A_1) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5477 (Win7SP1GDR.050727-5400) ---------------------------------------- AivlaSoft.Efb.DataProvider Assembly Version: 1.5.1.15704 Win32 Version: 1.5.1.0 ---------------------------------------- log4net Assembly Version: 1.2.10.0 Win32 Version: 1.2.10.0 ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727-5400) ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400) ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400) ---------------------------------------- DevExpress.Utils.v9.1 Assembly Version: 9.1.4.0 Win32 Version: 9.1.4.0 ---------------------------------------- Rhino.Commons Assembly Version: 2.0.0.0 Win32 Version: 2.0.0.1414 ---------------------------------------- Castle.Windsor Assembly Version: 1.0.3.0 Win32 Version: 1.0.3.5114 ---------------------------------------- Castle.Core Assembly Version: 1.0.3.0 Win32 Version: 1.0.3.5114 ---------------------------------------- Castle.MicroKernel Assembly Version: 1.0.3.0 Win32 Version: 1.0.3.5114 ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5476 (Win7SP1GDR.050727-5400) ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5476 (Win7SP1GDR.050727-5400) ---------------------------------------- Rhino.Commons.Clr Assembly Version: 2.0.0.0 Win32 Version: 2.0.0.1414 ---------------------------------------- System.Web Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727-5400) ---------------------------------------- Castle.DynamicProxy2 Assembly Version: 2.0.3.0 Win32 Version: 2.0.3.5114 ---------------------------------------- AivlaSoft.Efb.Common Assembly Version: 1.5.1.15699 Win32 Version: 1.5.1.0 ---------------------------------------- System.Core Assembly Version: 3.5.0.0 Win32 Version: 3.5.30729.5420 built by: Win7SP1 ---------------------------------------- DevExpress.Data.v9.1 Assembly Version: 9.1.4.0 Win32 Version: 9.1.4.0 ---------------------------------------- DevExpress.XtraEditors.v9.1 Assembly Version: 9.1.4.0 Win32 Version: 9.1.4.0 ---------------------------------------- System.Data Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400) ---------------------------------------- DevExpress.XtraGrid.v9.1 Assembly Version: 9.1.4.0 Win32 Version: 9.1.4.0 ---------------------------------------- DevExpress.XtraBars.v9.1 Assembly Version: 9.1.4.0 Win32 Version: 9.1.4.0 ---------------------------------------- Desaware.MachineLicense35 Assembly Version: 1.6.0.0 Win32 Version: 1.6.3.0 ---------------------------------------- Microsoft.VisualBasic Assembly Version: 8.0.0.0 Win32 Version: 8.0.50727.5420 (Win7SP1.050727-5400) ---------------------------------------- Desaware.Dls.Interfaces20 Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- System.Security Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5475 (Win7SP1GDR.050727-5400) ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. ************************************************************************************ I'd love to get this working. Any help would be greatly appreciated.