Search the Community
Showing results for tags 'phenom'.
Found 12 results
-
Groeten Maarten! I have an interesting problem for you! When I launch the Carenado Phenom using SimLauncherX the primary (center) MFD does not/cannot activate. When I press the ENT or rightmost buttons the MFD flashes momentarily, but then it reverts to the start up, battery-on state. This is the case whether in the VC or when then the 2D option is displayed. However, if I select the Phenom whilst P3D v2.5 is already running, the MFD activates as expected. I had been communicating with the Carenado support crew, and it was puzzling them. I trust you will find this puzzling as well! I think something in the Systems/Engines initialization settings is perhaps the culprit? Dankjewel, Maarten!
-
Hola Amigos, Esta es la famosa Phenom 100 de Carenado y al momento no encuentro la forma de actualizar su base de datos,gps o sea para la navegacion! aqui les presento una captura de pantalla del panel de navegacion con la informacion necesaria a ver si alguien tiene la solucion y de verdad que se los voy a agradecer muchisimo. Nota: tengo la ultima version de Airac Navdata 1406 pero no esta el archivo para Carenado ni para el GPS G1000. subefotos
-
I just installed tha Phenom and according to the manual you can set / change the default values of the G1000 system in the G1000_config.xml file. However, I can not find a G1000_config file anywahere on my system. Where should this file be and where can I get an example of the file structure.
-
Hi, Just need to get a few opinions. I currently have a phenom II X6 1045t 2.7ghz cpu that i recently bought. Will it be worth it if i purchase a Cooler Master 212 cooler and overclock to 3.2 - 3.4ghz using addons such as the pmdg737, rex, and gex? -
Browsing the forums it seems like the FeelThere model has more system depth and better FPS than the Carenado. But this one sure is pretty...I find it a tad expensive for the system depth (or lack of) offered. It actually looks better in my FSX Acceleration than in P3DV2.2 Hope you like.... Thanks for looking
-
Some more shots - mostly of the VC Thnaks for looking
-
So i built a computer with an AMD phenom II X4 980 black edition (really good CPU for the price). So i have heard that when you buy a black edition it is a guarantee that you will over clock the CPU. Here is were i run into a problem i can not overclock the AMD CPU, i have overclocked an Intel and that worked fine. well it sort off isn't a problem because i think i found the problem. The problem is that i have a Corsair Dominator DDR3 1600MHz, it is brand new. Before i had OCZ dd3 MHz 4 times 2GB. I bought the corsair to see if i could over clock and get a stable over clock. So i Over clocked the AMD CPU at 4.01 GHz with the DRAM at 1333 and i got it stable for about 4 hours, I was using prime95. Long story short I got a blue screen when I was on FSX and then i put the bios at default. That was like a Month after when I Overclocked My AMD Phenom II X4 980. I made some research and people have a MHz ram with their AMD Phenom II x4 CPU and they over clocked it and got it stable. So this is my question the FSX hardware community those who has AMD. Will i get a more stable Over Clock if i buy this RAM http://www.newegg.com/Product/Product.aspx?Item=N82E16820145340. I am very skeptical that i will get a stable OC because i have gone through the corsair Dominator and that was hopeless and my OCZ RAM.I would Love some feedback from AMD usershere are some forums that i foundhttp://www.techpowerup.com/142432/AMD-Readies-3.70-GHz-Phenom-II-X4-980-Black-Edition-Processor.htmlhttp://www.techpowerup.com/forums/showthread.php?t=155753Specs:Amd Phenom II X4 980 3.7 Ghz Nivida Gts 2508gb of ram (corsair dominator DDR3 1600)ASUS: M4A487TD EVO Mother Board2x western digital 500gbCorsair 650 watt -
Coast of Freedom - a place where I feel at ease. Bussines jet and american flights Bonus WildLife When u feel nature
- 6 replies
-
- 2
-
-
- coast of freedom
- phenom
- (and 2 more)
-
Coast of Freedom (Part 11)[/size]
- 5 replies
-
- 2
-
-
- coast of freedom
- phenom
- (and 1 more)
-
<iframe width="560" height="315" src="//www.youtube.com/embed/7coNj4lF_to" frameborder="0" allowfullscreen></iframe> Attempting to post a link to a new video I recently uploaded to YouTube featuring the Carenado Phenom 100. I hope this information is useful to the community.
-
Greetings, I thought I would take the Phenom 100 out for a spin after completing my 2.5 load, and while the aircraft loads fine, I cannot activate the primary (center) MFD. Cold and dark works fine, I can spin up the engines, but no MFD. When I click on either the rightmost button or ENT I get a momentary flash of the normal display, but then it reverts to the Startup display, the one that says this, that, and the other thing has expired. This is also true for the Shift + 2 display. Anybody else seen this? I reloaded the aircraft, and also disabled instrument reflections per the "P3D User Readme" suggestion, but still nothing works. Thought I would ask "unoffcially" before I sent a request off to Chile. Thanks! JKH
-
I just purchased the E50P Phenom, and the Navigraph extension pack. I have a Navigraph subscription, and I used the FMS Data Manager from Navigraph to install AIRAC cycle 1713 into what I hope is the right location. On my system for FSX-SE: E:\Program Files (x86)\Steam\steamapps\common\FSX\CarenadoNavigraph\Navigraph\NavData\Proc How can I tell if the model is actually using this data? The splash screen for the G1000 Prodigy has some static text which is obviously not current. the AUX page for System Status shows System Software Version 0719.09, but the Aviation panel shows Cycle 0611, Effective 26-MAR-16, Expires 23-NOV-16. Are these just dummy dates? [They don't correspond to the AIRAC published dates.] Is it possible to tell the version of the Navigraph data, or even if it is using it at all?
