Search the Community
Showing results for tags 'problem'.
Found 243 results
-
Hi Guys, I know the dev of Pilot2ATC is active, so I hope someone or him can help 🙂 I am currently doing the trial days and everything seems to be okay except for when I take off from ZRH with an initial climb alitude (set by ATC) to FL140. After transition alt I set it to STD at FL140 and Pilot2ATC keeps asking me to expedite. I even changed the settings to allow up to 1000 feet difference, to no avail. I appreciate if anyone can help me with this. Thanks galaxy
-
Hello everyone, I have have a problem with the new addon scenery Berlin Tegel from Gaya. I purchased it today on the marketplace in fs2020 and tried it after downloading it. I recognized that a few Buildings are sunken in the ground and that the bridge on taxiway PW/PE isn't usable because of a buggy scenery so i reinstalled it several times but i can't fix it does someone has the same problem or a solution for this problem? My Theory is that this whole scenery is to high in the world some buildings standing on the original ground an som are standing on the new raised ground cousing these bugs. Greeting from Berlin B.B -
Hello, I have recently updated to P3D V5.1 and I have been having weird textures on the knobs and switches in the VC of the PMDG 737 NGXU. It has a sort of light blue reflection on the metal side of the switches (Fuel pump switch for example) Is there anyone else who has the same problems and please suggest a fix for it? Thank you.
-
Hi The default airport is covered with autogen trees, no conflicting addons for KMCO, running v3.1. anyone experienced this issue. Mike King
-
G'day, I am currently trying to connect to my mate in the Majestic Q400, using Shared Cockpit. However, when we connect he says he sees a single bar of connection and I do not see any green bars, he can also pull switchs and move flight controls that I can see but I am not able to do any of that. This seems like there is a one way connection even though we have both port-forwarded, put the correct ports in the control panels. We tried each person as master and loaded into the same livery at the same location at airports. My mate is using FSX-SE and I am using Prepar3D if that makes any difference. Thanks.
-
TLDR: After sorting some hardware issues (new motherboard and CPU), I have lost all aircraft sounds, both internal and external. ATC sounds still work. Has a configuration file changed in some way perhaps? What should I check? I’ve read there are issues with Intel’s Alder Lake CPUs which mean it’s better to run them on Win11 (which I’ve yet to upgrade to), but this seems far too specific a problem for that. Here’s the long version, at least some of which is possibly to blame: After ordering and fitting a new motherboard - ASUS TUF Gaming Z690-Plus WiFi D4 – and CPU – Intel Core i5-12400 - (the background to why I needed to is here), I then made the mistake of changing the drive letter of my G drive (HDD) to keep my SSD drive letters concurrent. I’d forgotten that MSFS core files are there (due to originally trialling MSFS in Game Pass, but that’s another old story which I got resolved. Doubt it's relevant). Of course, I couldn’t start MSFS or the other Game Pass-installed games residing on what had been G, so I changed the letter back to G, rebooted and signed out and back in to MS Store to start them properly. All was well until I got into MSFS. The small music clip started as usual (I have music disabled) but I had no menu sounds (no big deal) and no engine or cockpit sounds (e.g. hydraulics), very big deal. Everything else appears ok and the CPU is barely taxed. I used the Repair function for MSFS in Windows settings but that didn’t solve the issue. I don’t think a Windows repair (using the Media Creation Tool method) is likely to change anything. I also don’t think it’s an issue with the new mobo’s sound as sounds appeared fine in both Forza 7 and Forza Horizon 4. I also tried the headphone port instead of the speakers and the problem was the same in MSFS, ATC sounds but no aircraft noise. I’ve looked at the sound settings in the sim and all seems as it was before. I also checked the config files of a couple of aircraft after flying them to see if there was any reference to sounds being “False” rather than “True” but I couldn’t see anything which suggested something had been disabled. I have to assume it’s a main file in the sim which has been affected, but which one and where/how? -
I recently removed FSX box version and clean installed FSX SE. The base NGX pack is installed and works correctly. I am facing a serious problem installing the expansion (600/700). I cannot get past the second step of the install where the installer asks to select the FSX version. there is no possibility to select the FSX version and in the i end up getting a unable to find fsx.exe for the retail edition. I do not need to install NGX for the reail version. I run windows 10. -
Hi guys, So whenever I'm over a significantly big mass of water, and I look straight or below, my FPS drops down by more than half (while if I look up to the sky my fps increases to 29-30fps Locked.) I had REXTextureDirect installed before this so I thought it may have caused this, but after reverting to default waters, the problem still persists. I also have DX10 fixer installed, should I mess with those settings also. Thanks!
-
I installed the demo to boeing 737 800 (default) but whenever I open Voxatc it closes and the recent comms just becomes white. Please help!
-
Does anyone know why the checklists don't work? And if so, how to fix them? Thanks, Owen
-
Hello, I've noticed some FPS problems with the newest fixer e.g. when I fly with the Aerosoft Airbus. The problem are the shadows in the VC. Can someone tell me how to get better frames with shadows in the VC? -Sweetfx; NI for my GTX560; REX4; ASN Cheers
-
Hi guys, I'm having a problem with my Saitek cyborg v1 joystick in FSX. When I leave my throttle on idle, FSX shows my throttles at around 25%. At full throttle on the joystick, FSX shows my throttles at 75%. When I click calibrate, FSX's calibration system shows no problems at all with throttle position; 0% on the stick corresponds to 0% on the throttle, and 100% corresponds to 100%. When I use the same stick in XPX or Aerofly FS, the problem doesn't exist. This hasn't happened to me in the 2.5 years I've owned this stick and is a relatively new problem (a few weeks). The problem started when I unplugged my joystick and plugged in another Saitek controller (the pro yoke). The problem actually started with the pro yoke, so I thought it was specific to the yoke. Now I'm flying with my joystick, and the problem still exists. It's really annoying! What can I do? FSX SP2, by the way. Thanks -
I have a problem with ZSPD Shanghai P3dV4. There are some black textures like I show you in screenshot. Can you help me, I dont know why this black texture. https://ibb.co/chLjS7
-
Hi guys! I've experienced a blue weird terrain problem in my fsx. I used ENB but deleted it because i thought maybe that was the problem but its still blue. You can see here: http://gyazo.com/36bcb03a5421052e1bf73082f5319857 Thanks guys and have a good day! /Jacob
-
Hello, my fsx has a problem with some file, so i reinstalled it. But i forgot to remove any add ons. Now, i want to reinstall my PMDG NGX(Boxed) and my T7(Download Version). But i just have black gauges, no gear and nothing is clickable. I gues its something like software protection, but how can i reenter my key? There was no Key question during the stup and in the FSX. Im sure that its not an FSUIPC Problem, because its not installed. I hope you guys can help me Thx for help. Greetings from Mainz(RLP/Germany) Jonas Löffel.
-
So okay, I'm all ready to start my engines, normal start, good spoolup, N1 starts decreasing and stabilizes at 22.1 instead of 22.4. EGT immediately moves from 560 down to 476 and stays there. When I throttle up, none of the engines throttle up, they remain in the same old boring 22.1. Previously, in the original release, changing the affinity mask fixed this problem, but now, even with the last working affinity mask 254 it doesn't work. I have tried 255 and 84 too. Help?
-
Hi there, since a few days, I have a strange problem with the NGX, which I never had before in any plane in FSX. After using the 737 for a couple of years without any problems, some days ago most of the buttons and swichtes in the VC stopped working. They are ignoring basically my mouse clicks. The coursor changes to the hand symbol, but nothing happens if I click or scroll with the mousewheel. To make it a bit more complicatet, thats the case with a lot of switches, but not with all. On the EFIS for instance, all pushbuttons like terrain, data or also the traffic and standard pressure knobs are working fine, but the scroll knobs can´t be used. On the MCP not a single switch or butten can be used. All capped swichtes on the overhead are unusable, but rotary switches like the autobrake are working completely fine. But it gets even more strange. And at this point, I have absolutely no idea how this could be possible. I have found one single repaint (wich is the Angle of Attack repaint for the 738WL) where everything and every switch is working normal. Only if I install this repaint and only if I choose this repaint in FSX, all switches and knobs in the VC are useable. If I load another repaint (even the standard PMDG repaint) or if I switch to another repaint after loading the NGX with the Angle of Attack repaint first, the same problem occurs again. This hole thing is the case with all models from 600 to 900, with the exception that the AOA Repaint only fixes the problem on the 800WL (They have also repaints for the 600 and 700, but if I use those, the switches still don´t work on these models.) If use the NGX at its lates version on WIN7 64 bit. Does anybody have an idea, what could be going on here? Thanks and best regards, Schmo
-
I'm coming to present you my problem with FSX these last days which causes me some headaches... This happen with all my addons and only in Virtual Cockpit. Here we go: When the weather is good (no fog): Everything is OK. When the weather is bad (with fog): Everything goes wrong. If anyone has a solution.... Bruno.
-
Hi there, Was just wondering if someone could please help with this following problem: So i have set up Vox Atc to use the level-d navdata and this is working well because in the procedure pronunciation editor the sids and stars are displayed for the airport that I'm trying to fly from. I have made sure that the corresponding waypoints for the sid and star are in my flight plan but when I load up my flight and enable Vox Atc the departure clearance only includes the flight level I have to fly to and the squawk code. When I taxi out to the runway the controller just clears me to fly direct to my first waypoint. This is very annoying as I fly for a virtual airline and want to everything as realistically as possible and to do this I will need sids and stars in my flight plan. I have tried everything and also have contacted Vox Atc support but have gotten no response. I hope to hear from anyone who could offer some help. Many thanks in advance, Robbie.
-
Hi all! So. In every flight with PMDG 737NGX im getting an problem that destroys my flight. After departure and when i reached my final altitude everything is fine. LNAV and VNAV is on such as Autothrottle. The plane is following the ''Purple line'' on the navigation display and everything works perfectly until about 70-100 Nautical Miles (NM) from Top of Descent (T/D). My plane starts to fly it own way and its not following the Purple Line. Then the plane starts to descent slowly and after a while it starts to climb again above my Maximum Altitude. Its like rollercoaster. I tried to disconnect LNAV and VNAV and CMD A (Command A) and sets up the plane right. I then turn LNAv and VNAV such as CMD A. It dont work, the plane does the rollercoaster and won't follow the route correctly. What am i doing wrong? I've set up everything right (I think) and have watched many YouTube flights from famous YouTuber's and flown them myself but still getting the problem. Anyone out there who has/have the same issue? Here are some screenshots at my situatuon. http://gyazo.com/ded79aad6fcf7201ec3dacf958a7b2da http://gyazo.com/a0375bd940e5f423b66f522e811dbb3f Thanks!
-
hello every one! before few days i decided to try the P3D V2 Proffesional... after that I installed all the add-ons and sliders, I haven't T/W and normal trees (of ORBX FTX) so I looked for guides of ORBX trees to P3D V2 and I found someting here (AVSIM). It said to open new text at the desktop and write few thinks and to save it with XXX.reg, then to click it an approve it, It didn't work and I decided to delete the P3D and to stay with the FSX. I deleted the P3D and everythink was good. Today's morning I wanted to fly from KJFK-LLBG (JFK NW - Ben Gurion Tel Aviv). but then the PMDG747-400 Load Manager didn't work, it sais that the program stop to work and I had to options: 1) That Windows wiil look for asouloation and close the program 2)Close the program so I did reboot to the computer (it didn't work). then I tried to delete the PMDG747-400 from the control-panel and to install it again.So I deleted the 747-400 and all his add-ons liveries. then at the installation it didn't worked it said that he can't find the PMDG folder and then I understood that somethink isn't good because off the P3D. so I did a Seystem Reconstruction to the P3D time. and I delete it agian. but then whhen I tried to delte from the control panel the 747-400 it said that the set-up stop working and again I had 2 options. this is my problem! I must to delete it from the computer and i don't know how! thankes to the helpers
-
Hi Everyone, First,Im sory for my bad english.. I'm using Sp1c Pmdg NGX and I have a problem with LNAV. After takeoff, I am activating VNAV,LNAV and A/P.Airplane is following LNAV path normal and smoothly.But after 5-10 minutes later,LNAV is deactivating and airplane leaving from the LNAV path.After this, I am trying to use heading for correction, but airplane is not responding to my commands :S Can someone help me about this situation? For information : Im using FSX default weather engine (updating every 15 min) its maybe about weather update ?? Best Regars.
-
So since about a month ago I've been having this issue with FSX. My ground textures load very slow. They don't load until I'm right over the area. Random trees keep appearing up. The ground about 5 miles in front of me is completely barren. I have no clue what to do. It's not my add ons because I've tried it all. Have done a re install and it's still the same. I have no clue what to do. It drops my Frames about 20 fps! Anyone know about this? Thanks. PC Specs -AMD 8320 8 Core CPU @ 4.0 GHz -MSI 7870 -8 gigs of 1600 MHz RAM -GIGABYTE motherboard Add Ons -FSDT O'Hare -Aerosoft Hamburg -PMDG 737 & 747-400/800 -CS 777-200/300 & 767 -REX 4 -FS Recorder -Freeware Sceneries & Planes
-
Hello. Here you are the 2 bmp files: http://www.mediafire.com/download/91pcky890r0mrtc/eagle.zip can anyone switch those files to 888-8 and then send it to me? I need some help, I have to switch two .bmp files to Extended 32bit 888-8 and when I do it, the texture goes like this: And this is the bmp before doing this: -
http://www.youtube.com/watch?v=9Wl1zSVAVho
