Search the Community
Showing results for tags 'resolved'.
Found 53 results
-
Hello, I've recently purchased the AI Lights Reborn pro edition. I'm still trying to get used to the configurator so apologies if the solution to my problem was just a missing step. I've noticed that the AIG A320's nav lights are very bright to the point they illuminate on the ground. I've also noticed that the B737s have no nav lights on at all. Apart from that, all the other planes seem to use the light presets that I applied via the configurator. I have clicked on "Reset SimObjects" and "Verify Setup" in the OCI settings, with no luck. Lastly, as I fly on vatsim most of the time, is there an option to override Vpilot lighting behaviour on other aircraft? I notice a lot where pilots seem to leave their strobes on when at stand, especially those flying in the A320 family. I believe that pilots flying the Airbus have left the strobes in the AUTO position when on stand. Here, I'm guessing that Vpilot is assuming that AUTO=ON and so the strobe lights illuminate, when in reality they haven't. Thanks. -
resolved X-plane 11 - Install GTN 750 : Invalid licence
Pnes posted a topic in RXP GTN 750/650 Touch
Hello everyone I installed REALTY gtn 750 no problems of install. When I run X-plnae 11 and the PC12 the GTN 750 is present. But he puts the following message: http:// and What to do, please? Thanks in advance -
My RXP has been working without an issue for 6 months now on every aircraft I configured it for (add-on menu). I recently installed the Alabeo C207 and configured this plane for the pop-up GNS 530, the configuration appeared to work as expected. now when I attempt to pull up the RXP system from the views menu it pops-up as normal but immediately disappears. It is happening on all my aircraft now that were previously configured which were working as expected. -
I have just purchased the Reality XP GTN750 Touch to install into my newly acquired Carenado Sabb 340 . Using the Addons menu install feature, I have been able to install a popup window which is lsited as Unit 1 (managed). Problem: nothing works, except the mouse pointers on the knobs... completely black screen. I would appreciate any clues as to how to get it working. Ron
-
Hi there! I have been desperately trying to install the GTN750 for a few days now, to no avail. I keep getting these errors when running the installer. Any ideas? The trainers are working just fine. Thanks!
-
I logged in with Facebook a long time ago when the Create an Account wasn't working. I've stayed with the Facebook way. Now that you're taking away Facebook login, I'm about to lose all my history, right? Is there some way to change my account over to a non-facebook login before my credentials expire? Thanks, Gregg -
Hello everyone, I know I've always been using the name "Arjen Vandervelde". Well, this is, more or less, my real name. But, Vandervelde is the last name of my mother's side but it's not my actual last name that is present on my identification and it's not the name as the people know me. Usually, of course, you always get your father's name as a last name. But there is a reason why I'm not using my actual last name here, and I'm sorry I have to admit this now, and please don't ban me for this, but I'm extremely reluctant of posting my personal information on websites. Why? Well, when you're my age, being active on websites like flightsim websites, is something that is not considered as "cool" by your friends and classmates, and considering how easy it is to find out what somebody is doing on the internet, playing flight sims is not something you want everybody to find out about you. I just don't like people to find out what websites I'm on, and what (private) hobbies I have. I just hate the fact that nowadays you can't have any privacy anymore. You are probably thinking, why is this a problem if you don't use the last name people know you? Well, unfortunately I have accidently signed my posts and topics with my actual full name a few times. And now, if you search my actual name on Google, it comes up with maybe 2 or 3 results from AVSIM, all on top, meaning that these pages are being viewed the most when my name is being Googled. Some people I know already confronted me with what I'm doing online. Not necessarily "strange things", but just things that are not considered as "cool" for your friends and classmates, as I said. And all this is extremely embarrassing. Problem is, I cannot edit nor delete very old posts I made on the forums. Or is there a way I can actually do this? Is it also possible the AVSIM staff could delete those 2 topics for me as they are very old weren't so important anyway... I know this whole topic might seem a bit pathetic to some of you, but if you're my age (18), you can probably understand it. Thanks a lot, -
When trying to select "Use Mobile Version" on my iPhone, I'm getting a white page. If I try to refresh, I get a page with a note "Fatal error: Call to a member function mobile. . . " It seems like using the mobile version is getting more and more difficult.
-
I couldn't help but notice, that in the past few days some really old threads were kind of revitalized. I also noticed, that older threads do no longer carry the message that "The thread is older than 180 days, and particiation would be of little use", or something like that. Has this feature been disabled in order to speed up the forums? I actually found this feature quite reasonable, since now you have to read through a whole new topic in order to get to the new posts(I know, it's not always neessary, but sometime you don't get the whole discussion, then), and those posts often don't really have much to do with the OP, or they really are of no use, as the question was asked years ago. (e.g. a question from I think 2011 about good UK scenery, where we now get the answer that ORBX did England. Where's the use in that?) Another thing that puzzles me everytime I start re-reading such threads, is the presence of Alan Bradbury in those threads (btw, anyone know anything about him? I hope he's well!), so everytime I read through such threads I think "Yeah, Chock is back!", and then looking at the date, I'm a bit disappointed. Thank you in advance for your explanation. Best regards, Flo -
Being I just got back on here after a long absents is there a way to get credits for my old postings when I was active? Or does it all start a new? Its been awhile.
-
Hi, I just joined the forums here and I created a Post in the PMDG Forum. Just yesterday when I got a reply I went to it and i got the error "User does not have Permission to go to this post" This has been happening ever since. I created the post, so shouldnt I be able to access it? I have gotten a ton of replies from it and I want to answer them. ~Remy
-
I am trying to change my password But keep getting You must complete the entire form. I fill in to 2 boxes under Password. It does not tell what not been filled.
-
I find I am unable to use the enter key to CR to a new line. It all stays on the same line. Sorry if you kow this already! best, jake
-
I have been using my iPad for several months to view the Forum pages and everything works well with it. Today for the first time in a long time I logged on with my PC and found that there are no subject titles for any of the posts. The column all the way on the left side of the page where the title should be now shows just the start date of the post. I can not tell what any of the posts are about without opening them. I can't seem to find a way to fix this. I am using Windows 7 and Internet Explorer. Any suggestions?
-
I am running FS2004 (Version 9.1 Build 40901.01) in XP SP3 compatibility mode on a Windows 10 Ver. 1803 using the "no disk required" fs9.exe file. I updated FS2004 to version 9.1 using the official Microsoft files. FS2004 will not run under Windows 10 without the "no disk" file. I have installed (3 times) the rxpGTN750 gauge with no errors reported. When I install the gauge into an aircraft using either the add on manager, or by manually editing the panel.cfg file, the gauge will not come up or display. The c:\documents\user1 log file reports #rxpGTN.Gau ver. 2.3.2.0 Error: unsupported simulator version 9.0.0.30612 What options do I have to make this work? Thanks, Bill
-
I have just updated to P3D v4.3 and RXP GTN v 2.5.2. GPS based navigation is no longer working properly; on a 'Direct-To" course the aicraft will fly as much as 50 degrees off of heading. The aircraft appears to initially track on course but soon thereafter begins to drift. I am in OBS mode, with NAV selected as the lateral mode on the autopilot. Approach sequencing is no longer working, either. Aircraft proceeds past Fly Over or Fly By waypoint. This is demonstrated on two Milviz aircraft - the DHC-2 and C310R Redux. Also with A2A's C-182. Screenshots attached. Thoughts?
-
Hello, System: P3D v 4.2 on Win 10 machine. I have the GNS 430w V2.1, and successfully installed it into the Alabeo PA32. I can use the GPS to navigate enroute (it drives the HSI needle), but the problem arises when I activate a GPS approach: the 430w continues to provide lateral guidance, but I get no glideslope (the 430w does change to LPV mode). Whereas in my Alabeo C404, I can fly a full LPV approach to minimums. The stock PA32 has both a 530 and a 430. I replaced the 430 with the Reality XP 430w using the Addon wizard, and again, it works fine for everything but APP. Might this have something to do with the stock 530 being present? I tried "installing" the Reality XP 530 (which I don't have), such that the 530 panel is dark, but same result. I could not find any avionics switch setting in the PA-32 cockpit that might route things differently. I looked at the configuration settings menu, but left it default as the HSI was working...did I miss ticking a box there? Something else? Thanks! Scott
-
Hi .. I was wondering around and couldn't figure out the answer, hope to get some help. Im running multiple monitors X-Plane11, I need to drag the GTN750 to a secondary smaller touchscreen monitor, I tried different methods and settings to make GTN run on it's own window, just like the default GNS that comes with XP11, but couldn't figure it out. it looks like we cant drag the GTN outside the XP11 view! If the above is not possible, can I run the GTN trainer as a stand alone product and integrate it with XP through the same RealityXP plugin? any help? Thanks
-
Not sure this is the correct place to post this but... I installed the latest Ver. 3.4 of the working title g1000 today. I am unable to adjust the screen lighting. This is true of all the airplanes that use the G1000. Everything else seems fine. Any guidance on how to fix would be appreciated. I figured it out.. I have UWA lights installed, and they need to be above the WT G1000 mod. At least with the ver. I have.
-
I have opened a ticket with Carenado as well but looking to see if anyone has had this issue as well. When I load the latest B200 in XP11 and then load the 750 all the cockpit switches freeze. Nothing can be switched on/off or adjusted. If I load the plane w/o the 750 all is well. I also have the B200 that works in XP10 and have no issues with that version. Has anyone else seen or had this happen?
-
Is there a way to make the RXP GNS WAAS Hardware Driver work with the Precision Flight Controls Avionics Hardware (PFCs Digital Avionics Enhanced Hardware), RXP GNS 530W V2, and P3D version 4.2? Operating system is Win7. Thanks, Ron -
Thank you for making such a wonderful addition. Our flying club has recently added the GTN 750 and 650 to one of our planes and I am hoping to use this to help become more familiar with it within the sim. My hope is to be able to use this fully in VR without needing to use the popout windows. In the little bit of searching I have done, I realize there is some limitation with how x-plane 11 currently uses the VR mouse cursor and that it is unable to interact with the the current GTN 750/650. What is the current status of this implementation and do you foresee being able to enable this in the future? Does anyone know of a workaround to be able to interact with the 750 within VR (apart from the popout window)? Also, while in VR, the mouse wheel is no longer able to control fine adjustments on knobs, mixture, etc. It works fine the moment you leave VR. This is only with the 750 enabled, the moment I disable it, the mouse wheel functions again in VR. The only plane I have tried this with is the Justflight Arrow III (non-turbo version). Edit: I tried this in the AFM Mooney M20R Ovation II with the same results. The mouse is able to interact with the 750 in normal 3D cockpit mode and the mouse wheel works for fine control of knobs, trim, mixture, etc. Going into VR mode with VR mouse cursor, the mouse wheel no longer works and I cannot interact with the 750 on the panel. What is interesting, however, is that if I disable the VR mouse cursor, it disappears, but I can click interact with the 750 in VR mode on the panel itself. I just cannot see any cursor or what I am actually clicking (and the mouse wheel still doesn't work).
-
Hello I bought RealityXP GTN750; today I tried to update last version of the program, and after that, the product is not working. I reactivated the license, however the GTN is blank (off) in the planes. The product works fine until the update, but I had to make several attemps to reinstall and I think that is the cause of the problem. -
resolved Reality XP GNS2 FSX - Can't get it going
Roger Wilco posted a topic in RXP GNS 530W/430W V2
Hi! Have been spending hours trying to get the newly purchased RXP GNS V2 to interact with my FSX SP2. Tried reinstalling both FSX and RXP as well as SimConnect. I don't get any error messages but when I start the FSX and load the new C421 (or any other plane), I never see any add-on menu. Can't even seem to find the log files as per location in the user's manual ??? (I do see the rxpGNS2.dll in the GAUGES folder so it must have ran the installer at least partly) Win 8.1 Pro 64 Any suggestions on how to troubleshoot? Thanks -
Unfortunately, I always get this error message when I try to update my RXP GTN 750 to the new version: The error comes even if I turn off my firewall. The same error will also be reported later during the validation of my Flight1 account immediately before the actual reinstallation. But I can login to Flight1 without problems. When I first installed the RXP GTN 750 a few days ago and also with the update to version 2.5.2 I had not this problem (both with the firewall turned on). Is this a temporary server problem or what can I do? All the best. Micha
