Search the Community
Showing results for tags 'taxi2gate'.
Found 17 results
-
Hi, I just downloaded OTHH taxi2gate and upon exploring the scenery, i saw autogen buildings in the middle of the terminal,taxiways, and runways. I believe there's a problem with orbx. I hope someone can help me with this problem. Thanks, Francis
-
People may find that VOXATC does not like this otherwise superb scenery, and gives a 'Fatal Error' for any flight starting at KMCO. There is a problem with the AFCAD as supplied, which does not join up the taxiways crossing the bridges over the road - this seems to confuse VOXATC and it gives up the ghost. The solution is simple - using a program such as AFX, join up the taxiways so that they cross over the road, and all will be well. I'll let Tegwyn know this solution, because other airports elsewhere may cause the same symptoms. Incidentally, I would highly recommend this excellent scenery.
-
Hello I have recently bought Taxi2gate's KMCO addon and the VAS usage is insane! I fly the PMDG 777 and when ever I approach the airport, my VAS is around 3.8-4.9gb. This does not happen at any other airport. If I fly away from the airport, the VAS drops to 3.0gb. So something is happening with this scenery. Any ideas? The airport is currently unusable :( Thanks in advance. Matthew
-
Hi I use P3DV4.5 and brought Taxi2Gate TKPK St. Kitts & Nevis (Karibik). Officially its only for P3DV3, but I manage to install it, and the Airport looks fine, much better then default ... (I use ORBX Base & Vector & LC NA & SA) As other users wrote, they had problems with black autogene buildings around the airport. There are 2 Layers in the Scenery Library , the TKPK Airport Layer and below the TKPK Terrain layer. If I deactivate the TKPK Terrain layer, the ORBX Buildings "take over" around the airport , but I have some trees at the apron, where the planes are parking. Can I remove these Trees wits ADE (Airport Design Editor) with some kind of Exclusions? Is there a tutorial out there how it works P3DV4? Thanks Erik
-
Hi i just installed orbx's PNW and now my Ksea airport lighting isn't fully there, there are no taxiway lights, for Rwy 16R/34L there no approach lighting, center line lighting, end of runway lighting, TDZ lighting or runway lead off lighting and I've looked at the charts and the do have all this lighting at KSEA. whats going on? I'm using P3D v4 and i have your scenery above orbx's. i also had to remove the two orbx KSEA file due to me getting double jetways. i have pics put i'm not sure how i can put them in this post.
-
Hello everyone! Taxi2Gate MMMX is a scenery originally released for FSX but with these few tricks you will be able to use this scenery in P3Dv4/v5. Installation: Run the exe and locate your simulator folder. Install the scenery anywhere within your Prepar3D/Prepar3D v5 folder (make sure to remember where you installed it!) Go to C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X and copy both the Effects and Texture folder Go to your Prepar3Dv4/Prepar3Dv5 root folder (e.g. C:\Program Files\Lockheed Martin\Prepar3D v4) Paste the two folders (Effects and Texture) into the root Prepar3D directory - you should not be asked to overwrite any files! Launch Prepar3Dv4/Prepar3Dv5 Go to the Scenery library In there you have to manually add all three layers of the scenery within the MMMX-T2G folder (MMMX; MMMX-city; MMMX-terrain) - the layers should be in this exact order! Restart Prepar3Dv4/Prepar3Dv5 Settle down in MMMX and make sure you don't have any black buildings and everything looks fine! Download the MMMX_AF.BGL file either for Prepar3Dv4 or Prepar3Dv5 from this Google Drive link: https://drive.google.com/drive/folders/1-jn1fNZmyyW3vgJKmGD9pJcPECkYceJK?usp=sharing Once you have downloaded the file go to ...MMMX-T2G\MMMX\Scenery and paste the BGL file in there. Overwrite! That's it! Runway lights/Taxi lights/default buildings should be working/gone now! Have fun! :) Optional (RECOMMENDED!): We will be adding better Dynamic Lighting as well as GSXv1/v2 compatibility All rights go to inibuilds! Dynamic lighting for MMMX: https://forum.inibuilds.com/files/file/761-taxi2gate-mexico-city/ GSX-profile for MMMX: https://forum.inibuilds.com/files/file/929-taxi2gate-mexico-city/ follow given instructions carefull! Alright folks! I hope this helped and you managed to fix Taxi2Gate MMMX! Cheers, Niels
-
Just bought and fired up T2G's Hamad Int'l Airport. Looks great and awesome fps but no AI traffic at the new Doha. It's all at old Doha still. I have My Traffic 2013 and I've searched online to find a solution. Found a few things but nobody had My Traffic 2013. I tried to follow the steps anyway and got pretty far but at certain steps, I couldn't keep going. I'd be very grateful for any assistance.
-
Hey guys, as you may know, the 767-300ER has gone into retirement but got something to sit in place and take their position which is the Boeing 787-9 Dreamliner which AmeriCay have Inquired 2 for the time being, not sure if more will be in but here are my shots on the first Inaugural flight to Paris my favourite route if I do say so myself. On Climb out from Miami Airspace. Some weather below but smooth ride on the climb. Gotta love Active Sky In Bermuda Airspace in the Dusk Setting. Pretty Flight Deck eh? Sky Interior Lights in action Descending into France Airspace at Dawn time. Lots of clouds, had to check in the metar, metat did say it was clear and calm The countryside can be seen below. Speed was a bit high so had to depend on speed brakes to slow me a bit down. On final. No backtracking shots since had traffic on Approach for the same runway and went through the After-Landing Checklist. Here we are at Terminal C (C8) Ground Crew offloading Luggage Containers. Them RR's look really intimidating.
- 7 replies
-
- 8
-
- flycay
- qualitywings
- (and 5 more)
-
I'm trying to figure out if the problem I am having is unique to my setup, or is 'normal'. I really don't know how to fix this one. Problem: The GSX follow me car does not work if I ask for service from Yankee (Y), holding at Zulu (Z) to Gate 73 (Airside 4). The results are not only frustrating, but outright comical. Steps to duplicate: Start a flight with your initial location on 36L. Roll down the runway a little less than half way and bear right on Yankee. Hold short of Zulu and select Gate 73 in GSX. Request Follow-Me services. In theory, it should go something along the lines of B6 to north on Bravo or Charlie to west on Echo to south on Gulf and into Airside 4 via H4. But nooooooo... Requesting Gate 109 does seem to work a little better.
-
Hey all, long time no postings, so I needed do break out the old Aerosim :p0502: and paint by our good friend Ed! Modified her just a tad with a fictional LC holiday charter livery, but here she is in all her glory, on a quick hop from MMTC-MMMX :mexico-flag: . I am checking out all my new Taxi2Gate scenery packs. I was so impressed with their KSTL one, that I picked up pretty much every other one they had. Nice and detailed, LOW FPS hit. Enjoy!! :drinks: SCENERY - Taxi2Gate MMTC - Torreon, Mexico REX for FS9 PLANE - Aerosim L-1011-500 Cleared for take-off runway 12 Postive rate....Gear up! Into the wild blue yonder
-
Hello all, I'm not sure if this is the right place, but i just recently acquired Taxi 2 Gate's KMCO, which is amazing. Hats off to them with all the details, but im having a problem with the bridges, they all seem to be too high. Any suggestions on how to fix it? its not just on the one side, its on all the bridges. Thanks in advance.
-
I know that Aerosoft always releases new airport enhancement services pack with new airports supported, but I don't know why Taxi2Gate haven't made support for AES with their new Bratislava Airport. I bought GSX (Ground Services X), because I believed with that will work as a dream, and did, until several clicks.Because, I have to run my FSX in compatibility mode (XP) if I do not then FSX crashes. I have the proper version of uiautomationcore.dll with FSX can run smooth and without crashes. BUT the GSX can't run with compatibility mode enabled. I asked them how to run in that mode but they said: " I should not run in compatibility mode" but trust me, I must. My FSX always crashes if I don't have in that mode. So my last chance is that if somehow I could make that airport supported in AES. I have Windows 7 64bit. My QUESTION is how can I do that?