Can anyone tell me if I can use the FSBus2 display card that the 7 segment leds are mounted on (because I want to use the smaller Kightsbridge 7 segments)with the classic FSBus Display controller?In other words, are the pin assignments the same on the 7-seg led cards.ThanksDavid

No, the pin layout is different of the 7 segments leds and also the bus pins are different on fsbus1 and fsbus2.If you are a little experieced with electronics you could make your own pcb for the smaller kingbrights and connect these to the fsbus1 display board. At first I decided to do that myself (want to use the smaller kingbrights too). But I think it is less work togo for the fsbus2 because it has a lot of improvements in fuctionalityregards Norberthttp://home.wanadoo.nl/norbert.bosch

Hi Norbert,I have most of FSBus 1 built and I don't want to have to start from scratch building FSBus 2, and besides, only a small part of FSBus 2 is available as yet.I know that Johan from Novelair has redesigned the boards for FSBus 1, and I have used these for my 4 digit transponder, but there is a little too much space between the leds. 4 of them you can manage to squeeze together, but 5 gets a little messy.RegardsDavid

David...Send me a private email.I may be able to help you if you are talking about theSC36 series digits of Knightbright (or similar)George DorkofikisAthens, Greecehttp://online.vatsimindicators.net/811520/1704.pnghttp://www.precisionmanuals.com/images/forum/betaimg.jpg

If it helps I'm using FSbus1 Display boards and I use IOcards 3 and 5 digit pcb's to mount the Kingbrights....just wired to the appropiate pins...can send you the conversion for pinouts if you decide to go that way.

Thanks Ian,I think George has a solution for me first up. If not, happy to try your solution.RegardsDavid