Sign in to follow this  
Guest flightpro08

Upgrade

Recommended Posts

Hi,Old Computer:Motherboard ?Pentium 3 600512 memoryHercule GeForce2 Pro Window Me New computer:Asus P4B-533EP4-2.4B512 CorsairHW 60Keep the same video card:GeForce2 Pro Window XP or XP Pro? GeForce2 Pro is compatible with the new mother board?(voltage 1.5 V)Thank.

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

"medocbiga."Welcome to the AVSIM forums. I'm sure you'll find a lot of useful technical and MSFS information here. :-)Now onto your question. Upgrading your computer really depends on three things.1.) What brands you want. (AMD, Intel, ATI, nVidia, etc.)2.) What you plan on using the system for. (Games, networking, buisness, etc.)3.) Finally, and most importantly... How much money you have to spend. :-)If you're a gaming, willing to wait a couple of months, and have quite a bit of money to spend, I'd wait until this winter when AMD releases their new Hammer CPU and nVidia releases their new video card, the NV30. This is going to be a fantastic combo, but it will probably be pretty expensive (around $700-$800 just for the CPU and video card. :-eek )If you're a gamer and in the market for a new system right now, then you've got tons of options. You'll find that AMD is quite a bit cheaper then Intel (even after their recent prive cuts.) Both companies are fantastic and you can't really go wrong. I'd recommedn either the AMD Athlon 220+ or the Intel 2.4GHz with 533 FSB (Front Side Bus.) With either one of these, you can't go wrong. As for a video card...You're GeForce2 will work fine with virualyl any motherbaord, as 1.5V is 'standard.' If you want to get a new card (which I recommend) then you might want to get a GeForce 4 Ti4200. They can be found for around $120 if you shop around. As for Motherbaord...It's really a matter of personal preference. Motherboards do vary quite a bit, and depend on what type of CPU you decide on. I really don't have any advice on this. I'd say that you'll probably want to go with Abit, ASUS, or EPoX.As for RAM...PC2700 SDRAM is pretty good stuff. It's overclockable and is very fast. If there's one thing I regret about my system, its the RAM (MOBO only supports PC1800 or PC2100.)Overall, shopping for a computer can be pretty fun. Look around, find what you like, and find it at the best price. Make sure to get at least a 350W Power supply (I recommend 400W+) and a good case with some good cooling for both your case and CPU (especailly if you go with an Athlon, as they tend to run as tad hotter, though, AMD has fixed this quite a bit with their 2400+.) I hope this has been some help to you. If you have any further quiestions, please feel free to replay to this. Below are a couple of links for comptuer hardware retailers and information sites that I like.www.newegg.comwww.pricewatch.comAnd for tech info:www.amd.comwww.intel.comAnd for tech support:www.guru3d.comRyan-Flightpro08 :-coolVATSIM Pilot/ControllerZLA ARTCC Controller 1 (C-1)SAN TRACON Lead [link:www.taxiwaysigns.com]Taxiwaysigns.com Scenery Designer-----------------------------My "Home Made" System Specs:Intel Pentium 4 2.2GHz ProcessorTurbo Gamer ATX Mid-Tower with 420W Power SupplyEPoX 4G4A Motherboard with Intel 845G ChipsetVisiontek XTASY GeForce4 128MB Ti4600 (Det 40.41 Drivers)512MB PC2100 DDR RAM40GB Matrox 7200RPM Hard DriveWindows XP Home Edition*No CPU or GPU Overclocking*3dMark2001SE Score: 11298

Share this post


Link to post
Share on other sites

Thank.I use my computer for work but like to fly when i have some time.I am a private pilot and is cheaper on my computer.I need to upgrade my computer for work .

Share this post


Link to post
Share on other sites

If you're buying a system for work, I'd recommend getting a realtively cheap video card (as you won't be running any 3D games on a buisness system I assume) and save up for lots of RAM. 512MB is pretty standard, but if you're looking into running a ton of apps, then you might want to go with 1024MB. :-)Ryan-Flightpro08 :-coolVATSIM Pilot/ControllerZLA ARTCC Controller 1 (C-1)SAN TRACON Lead [link:www.taxiwaysigns.com]Taxiwaysigns.com Scenery Designer-----------------------------My "Home Made" System Specs:Intel Pentium 4 2.2GHz ProcessorTurbo Gamer ATX Mid-Tower with 420W Power SupplyEPoX 4G4A Motherboard with Intel 845G ChipsetVisiontek XTASY GeForce4 128MB Ti4600 (Det 40.41 Drivers)512MB PC2100 DDR RAM40GB Matrox 7200RPM Hard DriveWindows XP Home Edition*No CPU or GPU Overclocking*3dMark2001SE Score: 11298

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this