Below is the relay sym. and a pic or to of the finished bd. the epic setpoints will vary with each setup. So far they work well. I have had some problems getting the spoilers to work. Seem the sim wants to have them armed , offset 0BCC 1 or 0 .this does not give me a value to compair in epic to move the spoiler. offset 0BD0 is 0 to 16383 with 4800 armed.Even if I use offset 0BD4 spoiler left position, I still don't get feed back they are armed. Second problem is the spoilers in FS are very unstable, IE the value sent by FS is all over the place. I thought i had read some place that in FS aircraft config files you could set the flaps positions and such but so far I can't find any thing on them.

Hi!thanks for your pic! We will need a similiar solution when buidling moving trim wheels.Steve---------------------------------------------------------------------Do you know the A320 Flightdeck Project? Visit www.a320flightdeck.com

Thanks for the circuit diagram, would this be the relay using pin 1-6? I suppose if I want to build same circuit as yours would i need to use precise type of relay? what type?... I have found one called MIC653 under motorolla, through mouser catalog this one may be cheaper.. let me know if it is convenient to use.

>Thanks for the circuit diagram, would this be the relay using>pin >1-6? I suppose if I want to build same circuit as yours would>i need to use precise type of relay? what type?... I have>found one called MIC653 under motorolla, through mouser>catalog this one may be cheaper.. let me know if it is>convenient to use. No it is not pin 1-6 I'll send pic of top of relays. there are two types used. the larger relay is a double pole single throw.it has one relay and two sets of poles. the smaller relay is a single pole single throw.one relay, one set of poles. the relay on the double throw are pins 5-6. the relay pins on the single throw are pins 3-4.hope the pic clears this up. as to the type or brand all you are looking for is the number of poles and single throw. any braqnd will work. these are all 12 vdc. but a 5 vdc would work as well. I use 12 vdc because thats the power supply I power all my epic cards with. Ron.