Out of memory problem solved?

Hi Damian and others,As I stated in my previous thread regarding this matter, I intended to get to the bottom of this problem. It took a while, but what follows is a copy of the thread I just posted on the WidevieW support forum. Damian - I'll continue testing for a couple more days, and if indeed the problem is solved I'll let you know so that you can include a line in your wonderful documentation.Happy Holidays everyone!Approximately one week ago I switched my weather generation system to ActiveSky wxRE. No sooner did I do this than I started encountering the dreaded "out of memory" problem. I spent several days reading through old threads here so that I could figure out what had been tried in terms of solving the problem. I found the two common solutions offered by others to be:1. Set the maximum visibility in FS2002 to greater than 60mi2. Disable all the settings in the "visibility" section of FSUIPC.I did this, and true to form the out of memory bug was gone. But along with it I lost most of the appealing functions of wxRE - simply not acceptable in my mind. So I delved deeper into the issue. I tried many things, but in the end, I found the solution (although not documented directly) in Luciano's instructions for WidevieW. If you look very carefully, you'll notice the same thing I did:On the server, disable the WidevieW "accept Date/time updates" function. BUT IMPORTANTLY - leave it enabled on all the clients!You'll see that Luciano has this configuration in his figures, although he never directly addresses this (at least not that I saw). Now that I