I am having issues with this plane when it comes to slewing. The plane just takes off like a bat out of hell and I need to crash to reset the situation.I have tried both air files 7372 and N270FL. Does anyone have a solution ???Thanks

Hit the F1 key after you position yourself then it should be ok. Are your engines on when this happens? Just curious because I don't have that [email protected]http://sgair.net/images/member_name_banners/mike_small.jpg

Happens both ways engines off and on ...Thanks for the F1 tip

This is a problem in the .cfg file 'CG height above ground' entry. Whenever you slew and are above the ground when you 'release' slew FS2002 will put you at cruise speed with engines at full thrust. If the 'CG height above ground' value is not set correctly then FS2002 will 'think' you're above ground when you think your sitting on the ground. Hence full speed. Try this contact points section.[contact_points]point.0=1.0,32.916667,0.0,-8.15,1181.102362,0.0,1.219307,53.70,0.80,2.50,0.90,5.0,5.0,0.0,0.0,0.0point.1=1.0,-4.250,-8.580,-9.80,1574.803150,1.0,1.219307,0.0,1.0,2.50,0.90,6.90,6.90,2.0,0.0,0.0point.2=1.0,-4.250,8.580,-9.80,1574.803150,2.0,1.219307,0.0,1.0,2.50,0.90,6.90,6.90,3.0,0.0,0.0point.3=2.0,-15.0,-46.50,2.250,1574.803150,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,5.0,0.0,0.0point.4=2.0,-15.0,46.50,2.250,1574.803150,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,6.0,0.0,0.0point.5=2.0,-48.0,0.0,1.666667,1574.803150,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,9.0,0.0,0.0point.6=2.0,34.833333,0.0,1.666667,1574.803150,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,4.0,0.0,0.0static_pitch=-2.25static_cg_height=9.0