Hi all,First let me say thank you to all of you who helped diagnose my problem with FS9 over the past month or so. It has finally been resolved. It was a bad memory stick causing endless .dll crashes, and now I am up and running again, so THANK YOU!!Now for my question. I downloaded the Dreamwings Dash 8 and so far I really like it, especially the wing views. I also downloaded the dash 8 panel, specially for the dream wings model. When I start my takeoff roll, somewhere around 75-100kts, my nose gear starts bouncing uncontrollably until I crash. Its like I'm driving a gansta car and bouncing down the strip!! :( Does anyone have this model and know how to fix it, or make it not do that?THanks,

Hello,For Q400 try this:[WEIGHT_AND_BALANCE]max_gross_weight=64500 // (pounds)empty_weight=37888 // (pounds)reference_datum_position=0, 0, 0 // (feet) distance from FlightSim Reference position: (1/4 chord, centerline, waterline)empty_weight_CG_position=0, 0, 0 // (feet) longitudinal, lateral, vertical distance from specified datummax_number_of_stations = 50//Cabinstation_load.0="723,15.000000,0.000000,4.000000, Flight Crew" //FWDstation_load.1="0,0.000000,0.000000,4.000000, Front Pax Cabin" //Centerstation_load.2="0,-15.000000,0.000000,4.000000, Rear Pax Cabin" //Rear//Baggage Cmptstation_load.3="0.000000,20.000000,0.000000,-2.000000, Baggage" //FWD station_load.4="0.000000,-15.000000,0.000000,-2.000000, Cargo" //Rear station_load.5 = "0.0, 0.0, 0.0, 0.0, FsStation"station_load.6 = "0.0, 0.0, 0.0, 0.0, FsStation" ;Moments of Inertiaempty_weight_pitch_MOI = 214701.000empty_weight_roll_MOI = 233201.000empty_weight_yaw_MOI = 504691.000empty_weight_coupled_MOI = 000.000CG_forward_limit= 0.000CG_aft_limit= 1.000[contact_points]static_pitch= -0.559static_cg_height= 7.065gear_system_type=0max_number_of_points=6point.0= 1, 47.700, 0.000, -6.800, 1500, 0, 1.161, 80.000, 0.200, 2.000, 0.987, 5.000, 5.000, 0point.1= 1, -2.000, -12.990, -7.300, 1575, 1, 1.161, 0.000, 0.215, 2.498, 0.642, 5.000, 5.000, 2point.2= 1, -2.000, 12.990, -7.300, 1575, 2, 1.161, 0.000, 0.215, 2.498, 0.642, 5.000, 5.000, 3point.3= 2, -5.000, 46.500, 5.400, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6point.4= 2, -53.700, 0.000, 0.600, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9point.5= 2, 44.100, 0.000, -3.900, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4Q200[WEIGHT_AND_BALANCE]max_gross_weight = 36530.000empty_weight = 23004.000reference_datum_position = 0.000, 0.000, 0.000empty_weight_CG_position = 1.000, 0.000, 0.000max_number_of_stations=4station_load.0 =170.000000, 22.000000, -2.000000, 0.000000, Pilotstation_load.1 =170.000000, 22.000000, 2.000000, 0.000000, Co-Pilotstation_load.2 =750.000000, 0.000000, 0.000000, 0.000000, PAXstation_load.3 =450.000000, -14.000000, 0.000000, 0.000000, Bagage;Moments of Inertiaempty_weight_pitch_MOI = 98556.000empty_weight_roll_MOI = 110566.000empty_weight_yaw_MOI = 202117.000empty_weight_coupled_MOI= 0.000CG_forward_limit= 0.000CG_aft_limit= 1.000[contact_points]//point.0= 1.000, 26.000, 0.000, -6.700, 3000.000, 0.000, 0.500, 55.000, 0.200, 3.500, 4.000, 4.800, 4.800, 0.000, 0.000, 0.000point.0= 1.000, 26.000, 0.000, -6.700, 3000.000, 0.000, 0.500, 55.000, 0.200, 3.500, 1.000, 4.800, 4.800, 0.000, 0.000, 0.000point.1= 1.000, -0.700, -13.500, -6.900, 1574.000, 1.000, 0.596, 0.000, 0.642, 2.500, 0.815, 4.500, 5.200, 2.000, 0.000, 0.000point.2= 1.000, -0.700, 13.500, -6.900, 1574.000, 2.000, 0.596, 0.000, 0.642, 2.500, 0.815, 4.800, 4.900, 3.000, 0.000, 0.000point.3= 2.000, -3.330, -23.920, -3.000, 787.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000point.4= 2.000, -3.330, 23.920, -3.000, 787.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6.000, 0.000, 0.000point.5= 2.000, -22.670, 0.000, 0.000, 787.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000point.6= 2.000, 23.080, 0.000, -1.500, 787.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000static_pitch = -1.000static_cg_height = 7.100gear_system_type=1 //HydraulicRegards.Gus.

that did it. THANKS! :(