Hi Aerosim 772 Pilots,I fly this marvelous aircraft since 1 week and i'm happy with and therefore did several approaches either auto-land and/or full manual, ILS and/or VOR or GPS.During my first landing i had all the callout, mean the 50-40-30-20-10 ft and was very happy about that:-)Since then and after several approaches, i have no callout except the DH, but for the others cited above, no nothing or i should say, sometimes ?Do you have the same "behavior" ?Normally, and correct me if i'm wrong but no matter you're shooting a precision approach or not you have always these callouts ?Am i doing something wrong or forgot to engage something or is it depending on the Airport/approach ?The latest approach i shooted was the ILS 03 at KGEG with all the callout, this time, the minimum and 50 => 10 ft!Thanks for sharing your experience.Cheers,

OK,1) I found that, depending on the approach, when the terrain under the approach path is very rugged, so that the Radio ALT indication fluctuates widely.2. When rate of descent before touchdown is too high.3. When rate of descent before touchdown is uneven.The approach speed must be ~ 140Kt, Flaps 25 with a VSI of 800fpm descend, constant, under this profile, the callouts work very well :( Enjoy.Sincerly,