button change not detected

[sikorsky77 0]

After a battle with initializing the Pokey Dll device on which i made a post, i found the solution

 

now the lua script loading the dll card seems working

 

the script stored in path .\\modules\linda\libs is called lib-Zpokey56U01  and is loaded with standard libs of Linda

 

here the log 

  2055204 LUA.1: POKEY56U01 Able to create PoKeys Device object

  2055220 LUA.1: POKEY56U01 Start connection in USB mode

  2055251 LUA.1: POKEY56U01 Device number is

  2055282 LUA.1: 1

  2055314 LUA.1: POKEY56U01 mounted and ready to use

  2055360 LUA.1: POKEY56U01 Panel_P5601U Lua Script Called

  2055392 LUA.1: POKEY56U01 Panel_P5601U Script started

  2055438 LUA.1: POKEY56U01 End of Panel_P5601U Main Program

 

i associated Pin 10 of the card to the Battery Switch but nothing change to P3D plane battery Status

moving my toggle switch OFF to ON or ON to OFF has no impact on the aircraft itself

i made a check with the Pokey 56U Software to see if toggle switch react when i move it from OFF to ON and ON to OFF  (to verify Cabling connection) and it is the case 

the software detect OFF/ON position of the switch

 

the Fuction section Panel_P5601U_Script is executed , but the If Test_button did not detect anything

did somebody used Pokey card with lua associated script as this and could help me to understand what are my errors or what i am missing ?

 

below my simple script 

 

thanks for your help and/or ideas

Thierry

-- =================================================================================

-- Initial Setup

-- =================================================================================

require "luacom"

poKeys = luacom.CreateObject('PoKeysDevice_DLL.PoKeysDevice')

 

if poKeys == nil then

  ipc.log("POKEY56U01 Unable to create PoKeys Device object")

  ipc.display("POKEY56U01 Unable to create PoKeys Device object")

  ipc.exit()

else

  ipc.log("POKEY56U01 Able to create PoKeys Device object")

  ipc.display("POKEY56U01 Able to create PoKeys Device object")

end

-- =================================================================================

-- check current physical switch setting and update FSX software switch to match

-- =================================================================================

 

function Panel_P5601U_Script()

  ipc.log("POKEY56U01 Panel_P5601U Script started")

  ipc.display("POKEY56U01 Panel_P5601U Script started")

-- Check pin 10----------------------------------------------------------------------

  if ipc.testbutton(1,10) == true then

    ipc.log("POKEY56U01 Button 10 Battery ON !!")

    ipc.display("POKEY56U01 Button 10 Battery ON !!")

    ipc.writeUD(0x281C, 1) -- toggle switch Battery is ON

   end

  if ipc.testbutton(1,10) == true then

  -- physical switch in ON

    if ipc.readUD(0x281C) == 1 then -- toggle switch Battery is ON

      ipc.control(66241)  -- toggle switch Battery is ON

      ipc.log("POKEY56U01 Button 10 Switch Battery is ON")

      ipc.display("POKEY56U01 Button 10 Switch Battery is ON")

    end

  end

 

  chk_pin_10 = false

  chk_pin_10, onoff_pin_10 = poKeys:GetInput(10)

  if (chk_pin_10 == false) then

    -- GetInput Failed... Most likely not configured properly

    -- Put code here to perform for failure

  else

    -- We got results from the switch GetInput Function

    if (onoff_pin_10 == true) then

      -- Switch at Pin 10 is ON

      -- Put code here you wish FSX to perform

      ipc.writeUD(0x281C, 1) -- set Battery to ON

      ipc.log("POKEY56U01 Button 10 Battery ON !!")

      ipc.display("POKEY56U01 Button 10 Battery ON !!")

    else

      if (onoff_pin_10 == false) then

        -- Switch at Pin 10 is OFF

        -- Put code here you wish FSX to perform

        ipc.writeUD(0x281C, 0) -- set Battery OFF

        ipc.log("POKEY56U01 Button 10 Battery OFF !!")

        ipc.display("POKEY56U01 Button 10 Battery OFF !!")

      else

        -- Could not determine status of Switch at Pin 10

        -- Put code here you wish FSX to perform

      end

    end

  end -- chk_pin_10

 

  ipc.log("POKEY56U01 End of Panel_P5601U Main Program")

  ipc.display("POKEY56U01 End of Panel_P5601U Main Program")

end -- check_switches

 

-- =================================================================================

-- Initial Script Startup

-- =================================================================================

connect_usb = true    -- true = USB  /  false = ethernet

 

if (connect_usb == true) then

  -- Get Number of poKeys Devices Found

  ipc.log("POKEY56U01 Start connection in USB mode")

  ipc.Display("POKEY56U01 Start connection in USB mode")

  no_devices = poKeys:EnumerateDevices()

  ipc.log("POKEY56U01 Device number is")

  ipc.Display("POKEY56U01 Device number is")

  ipc.log(no_devices)

  ipc.display(no_devices)

 

  -- Connect to Device

  if (no_devices ~= 0) then

    connect_flag = poKeys:ConnectToDevice(0)

-- ipc.log(connect_flag)

-- ipc.display(connect_flag)

    if (connect_flag == true) then

      ipc.log("POKEY56U01 mounted and ready to use")

      ipc.display("POKEY56U01 mounted and ready to use")

    else  -- code to perform if ConnectToDevice fails

      ipc.log("POKEY56U01 Unable to connect poKeys USB Device 1")

      ipc.Display("POKEY56U01 Unable to connect poKeys USB Device 1")

 ipc.exit()

end

  else

    ipc.log("POKEY56U01 Device not enumerated")

    ipc.Display("POKEY56U01 Device not enumerated")

    ipc.exit()

  end

 else

  connect_to_ethernet()

  ipc.log("POKEY56U01 Connected in ethernet")

  ipc.Display("POKEY56U01 Connected in ethernet")

  ipc.exit()

end

ipc.log("POKEY56U01 Panel_P5601U Lua Script Called")

ipc.display("POKEY56U01 Panel_P5601U Lua Script Called")

Panel_P5601U_Script()     -- check physical switch and configure fsx software switch

 

-- =================================================================================

-- Event Section

-- =================================================================================