January 27, 20197 yr On 7/17/2018 at 9:59 AM, emef said: On 7/17/2018 at 9:59 AM, emef said: The RXP GTN 750 can also be integrated into the cockpit of the Aerobask Eclipse 550 (similar to the Aerobask Panthera😞 Aerobask Eclipse 550 virtual cocpit with RXP GTN 750 and Aerobask GTN 650 I wish there was 650 mod as well.
January 28, 20197 yr I could have sworn there was a mod out there for the Eclipse 550 that let you use both the 750 and the 650 but when I went searching for you, I couldn't find it for love nor money. I'm going crazy looking for it because I swore I used it before, If anyone out there has it, can you post a link?
January 29, 20197 yr Author Thanks. I may try to create it myself using the Baron 58 tutorial. I don’t have the slightest idea how to create these mods. Might be a disaster. 🙂
January 29, 20197 yr Zarigani pretty sure I've seen it too, really wish the forum here was a bit more organised. ClayWagner, that baron example is relatively straight forward, a few videos on youtube too. Would be happy to give it a go if you want, but need a file from you so I know where it goes.. If you could go into keybindings and look for "Make screenshot of your panels", assign something then use it. Should create a "Panel_Preview" image file in the Eclipse 550 > cockpit_3D > -PANELS- folder. Just make sure the avionics are on when you do that and don't resize the file. I can't really test it, no guarantees I get it right first go 😉 Edited January 29, 20197 yr by N1K380
January 29, 20197 yr Author 6 hours ago, N1K380 said: Zarigani pretty sure I've seen it too, really wish the forum here was a bit more organised. ClayWagner, that baron example is relatively straight forward, a few videos on youtube too. Would be happy to give it a go if you want, but need a file from you so I know where it goes.. If you could go into keybindings and look for "Make screenshot of your panels", assign something then use it. Should create a "Panel_Preview" image file in the Eclipse 550 > cockpit_3D > -PANELS- folder. Just make sure the avionics are on when you do that and don't resize the file. I can't really test it, no guarantees I get it right first go 😉 Thank you! Here is link to the file. https://www.dropbox.com/sh/81hshqy1w2xss2x/AADdufox9qEa5Vh9_awKZA7Sa?dl=0 Â
January 31, 20197 yr Give this a roll of the dice... GTN 750 is set as the primary and Nav 1, 650 on 2. Quote [GTN] ; comma separated list of gauges gauges = GTN_750_1, GTN_650_2 [GTN_750_1] ; comma separated list of render targets. drawto = WINDOW, PANEL3D ; is the master device if true. MasterDevice = true ; connects GPS to copilot side if true. CopilotSide = false ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; reduce screen update rate by half. ReduceRate = false ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Display = -100 ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Buttons = -75 ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course if true. LinkCrs = true ; connects HSI OBS to GPS if true. LinkObs = true ; connects GPS to VOR if true. LinkVor = false ; connects GPS to Autopilot if true. LinkOto = true ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; enables automatic GPS/VLOC selection. AutoSelect = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 1 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to Audio Panel if true. UseAudioPanel = true ; connects GPS to Transponder if true. UseTransponder = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = true ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; enable device failures if true. UseFailures = false ; intercepts X-Plane GPS commands if true. UseSimGpsCmds = true ; updates Simulator GPS flight plan if true. LinkSimGps = true ; saves the active route as a Simulator flight plan if true. AutoSavePln = true ; sets transponder VFR code (octal default: #1200). VFRcode = #1200 ; sets fuel type: AVGAS,JETA,JETB,DIESEL FuelType = JETA ; sets ownship icon type: ; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW OwnshipIcon = BUSINESS_JET ; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2 NavDbType = 1 ; sets TAWS type: TERR,TAWS_B,TAWS_A TawsMode = TAWS_A ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; TAWS approach air speed (knots), -1 (auto detect Vref: 96) TawsApprSpeed = 96 ; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 125) TawsFlapSpeed = 125 ; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 194) TawsGearSpeed = 194 ; sets voice type: MALE,FEMALE VoicePref = MALE ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 [GTN_750_1.WINDOW] ; display window if true. visible = false ; show screen only gauge if true. nobezel = false ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = WINDOW ; display position and dimension (left,top,width,height) frame.rect = 1383,911,537,511 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; display mouse tooltips if true. tooltips = false ; freeze display position if true. locked = false ; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button). popleft = false ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false ; VR mode position and dimension (left,top,width,height) (requires XP11.20) vrmode.rect = 0,790,830,790 ; display as popout window if true (requires XP11.1). undocked = false [GTN_750_1.PANELS] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 1024,2048,600,707 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button). popleft = true ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false [GTN_650_2] ; comma separated list of render targets. drawto = WINDOW, PANELS ; is the master device if true. MasterDevice = false ; connects GPS to copilot side if true. CopilotSide = true ; selects COM/NAV Radios '1' or '2'. RadiosPair = 2 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; reduce screen update rate by half. ReduceRate = false ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Display = -100 ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Buttons = -75 ; connects GPS to Autopilot if true. LinkOto = false ; connects GPS to HSI if true. LinkHsi = True ; connects GPS to HSI course if true. LinkCrs = True ; connects HSI OBS to GPS if true. LinkObs = True ; connects GPS to VOR if true. LinkVor = false ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; enables automatic GPS/VLOC selection. AutoSelect = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 2 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to Audio Panel if true. UseAudioPanel = true ; connects GPS to Transponder if true. UseTransponder = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = true ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; enable device failures if true. UseFailures = false ; intercepts X-Plane GPS commands if true. UseSimGpsCmds = false ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; sets transponder VFR code (octal default: #1200). VFRcode = #1200 ; sets fuel type: AVGAS,JETA,JETB,DIESEL FuelType = JETA ; sets ownship icon type: ; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW OwnshipIcon = BUSINESS_JET ; selects the default database: 0: 'Garmin (North America)', 1: 'Jeppesen (Worldwide)' NavDbType = 1 ; sets TAWS type: TERR,TAWS_B,TAWS_A TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; TAWS approach air speed (knots), -1 (auto detect Vref: 96) TawsApprSpeed = -1 ; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 125) TawsFlapSpeed = -1 ; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 194) TawsGearSpeed = -1 ; sets voice type: MALE,FEMALE VoicePref = MALE ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 [GTN_650_2.WINDOW] ; display window if true. visible = false ; show screen only gauge if true. nobezel = false ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = WINDOW ; display position and dimension (left,top,width,height) frame.rect = 1383,400,537,226 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button). popleft = false ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false ; VR mode position and dimension (left,top,width,height) (requires XP11.20) vrmode.rect = 0,350,830,350 ; display mouse tooltips if true. tooltips = false ; freeze display position if true. locked = false [GTN_650_2.PANELS] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 1024,1340,599,266 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button). popleft = false ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false  Edited January 31, 20197 yr by N1K380
February 1, 20197 yr Author Unfortunately it did not work. I copied the entire contents and overrode it. The original 650 was still showing.
February 1, 20197 yr If the RXP 750 turned up then this should fix it, if not I'll have time on the weekend to give it more time. Annoyingly I can't edit the previous post so ill try this method 🤔 https://www.dropbox.com/s/nw7mmtex4lq1bbx/RealityXP.GTN.ini?dl=0
February 1, 20197 yr Author 8 hours ago, N1K380 said: If the RXP 750 turned up then this should fix it, if not I'll have time on the weekend to give it more time. Annoyingly I can't edit the previous post so ill try this method 🤔 https://www.dropbox.com/s/nw7mmtex4lq1bbx/RealityXP.GTN.ini?dl=0 Ok great. I will check tonight. Thank you so much for taking the time to help me!!
February 2, 20197 yr Outdated already 😛 Only had my macbook with me, which doesn't run GTN's. Code kept me busy on a few weeknights.. Just tested using two 750's so it should be working with the 650 now. Remapped the 3D panel buttons while i was at it. Files are in the aircraft mods thread Â
February 2, 20197 yr Author 7 hours ago, N1K380 said: Outdated already 😛 Only had my macbook with me, which doesn't run GTN's. Code kept me busy on a few weeknights.. Just tested using two 750's so it should be working with the 650 now. Remapped the 3D panel buttons while i was at it. Files are in the aircraft mods thread  Awesome job. Thank you!!!
Archived
This topic is now archived and is closed to further replies.