January 11, 20224 yr Hi We are using a P3D model and having issue to activate the tracker mode (TRK) for take off mode. We follow the flight manual, having aircraft on runway with FD on, A/T switch ARM, N1 set via TRP and we don't see the TRK indicator appeared on the PFD (refer to below Qualitywings manual) Can someone please let us know what else we need to do to activate this tracker mode ? Your quick response would be very appreciated ====== Before takeoff First thing to switch on is the F/D. Common procedure has the F/D switched on as you taxi out into the active, but make sure they are activated before takeoff. Upon doing so, they will automatically engage in TO/GA (Take-Off/Go-Around mode). Secondly, before taxiing onto the runway, set the A/T master switch to ARM. It will help setting thrust to the correct N1 for takeoff. N1 can be selected on the TRP. Before takeoff, with the A/T armed, you should see on your PFD a white A/T legend, a green TO legend and a green TRK legend. After pressing the TO/GA button, the white A/T legend should become green, and next to it TO MAX should appear for a maximum thrust takeoff, or TO REDU for a derated (reduced thrust) takeof Thanks Edited January 11, 20224 yr by Thien
Archived
This topic is now archived and is closed to further replies.