Sign in to follow this  
Guest abent

How to extract RealityXP gauges to repaint...

Recommended Posts

Help AVSIM continue to serve you!
Please donate today!

Very easy!just use the following setting in the INI file:// NoFrame=ON | OFF Set to render a screen only gauge to ease panel bitmap integrationIt will only draw the screen, not the bezel!Just in case, here is the full list://////////////////// EADI Settings://///////////////////// BaroUnits=hpa | inhg Display Baro setting in mb// Meters=yes | no Display Altitude in Meters (in addition to feet)// VMO= Fixed Vmo limit in knots (indicated) - if set to 0, then Vmo is dynamic based on Flight Simulator information// RadAlt=-6.5 Radar Altimeter Calibration// V1= VR= V2= Displayed V1/VR/V2 values - used if no table is provided// VS0= Stalling Speed with landing gear and flaps extended at maximum weight - used if no table is provided// VS1= Stalling Speed with landing gear and flaps retracted at maximum weight - used if no table is provided// ZFW= Zero Fuel Weight. If ZFW is set to other than 0, An extended V speed table is expected and used to compute speeds// FDMode=VBAR | CROSS Flight Director Display mode: VBAR or CROSS// TrendVector=ON | OFF Display the Speed Trend Vector// TrendColor= R,G,B Speed Trend Vector Color// RunwayGuide=ON | OFF Display the Runway Guide on approach// AttCageAdj= Calibration of the Attitude Cage. Positive numbers lowers the artificial horizon.//// CDIColor= R,G,B Color of the CDI indication (25,125,210 = typical EADI blue)// (246,140,246 = typical Magenta)// (100,190,180 = typical Cyan)// (255,255,255 = typical White)// RMI1Color=R,G,B Color for the RMI1 needle// RMI2Color=R,G,B Color for the RMI2 needle// ScaleColor=R,G,B Color for the LOC/GS scale// NeedleColor=R,G,B Color for the LOC/GS needle// TextColor=R,G,B Color of text information (DH setting) and FMA bars// SkyColor=R,G,B Color of the Attitude Indicator Sky area// GroundColor=R,G,B Color of the Attitude Indicator Ground area// FMAColor=R,G,B Color of the displayed Active Modes in the FMA// VSPDColor=R,G,B Color of the displayed V Speeds on the speed tape//// NOEADI=yes | no Display the EADI// NOSPEED=yes | no Display the speed tape// NOALTI=yes | no Display the altitude tape// NOIVSI=yes | no Display the IVSI// NOEHSI=yes | no Display the EHSI// NOFMA=yes | no Display the FMA// EADIZoomFactor= Display Zoom Factor for the EADI screen/////////////////////// EICAS Settings://////////////////////// Engines= Number of Engines// EngineLeft= Engine Number (FS2002 model wise) assigned to Left// EngineCenter= Engine Number (FS2002 model wise) assigned to Center// EngineRight= Engine Number (FS2002 model wise) assigned to Right// N1Max= N1 Scale// N1Warn= N1 Warning (amber area) scale// ITTMax= ITT Scale// ITTWarn= ITT Warning (amber area) scale// N2Max= N2 Scale// FuelUnits=lbs | kgs Fuel Units, in pounds or kilograms// OILMax= OIL Pressure Maximum scale// OILWarn= OIL Pressure Warning (amber area) scale// OILMin= OIL Pressure Caution (red area) scale//// N1Scaler= scales the value range as read from FS to another scale range// N1Offset= offset the value range as read from FS to another base// used together, the JL4 displayed value is: N1displayed = N1 * N1Scaler - N1Offset// ITTScaler=// ITTOffset=// N2Scaler=// N2Offset=//// FlapsSrc= Used with FlapsAlt to translate the model flaps settings to another scale on the EICAS// FlapsAlt= FlapsSrcis a comma separated list of all the flaps settings as found in the aircraft.cfg file// FlapsAlt is a comma separated list of the displayed flaps angles in the EICAS.// If omitted, the EDU will display the real flaps angles as reported by the model// NB: both lists must have the same number of values with a minimum of 2 entries////////////////////// EFIS Settings://///////////////////// CDI=ON | OFF Display the CDI on the EFIS// APTFILT_Type=H|HS Airport Map Filter: runway types. H = HARD / HS = HARD + SOFT// APTFILT_Len= Airport Map Filter: minimum runway length in feet// APTColor=R,G,B Color of the Airport Map symbol (typical 80,153,218)// VORColor=R,G,B Color of the VOR Map symbol// WPTColor=R,G,B Color of the Intersection Map symbol// PlanColor=R,G,B Color for the flight plan route// LegColor=R,G,B Color for the active flight plan leg// TCASColor=R,G,B Color for the regular targets (usually white or blue)// TCASTAColor=R,G,B Color for the TA Targets (usually yellow)// TCASTARAColor=R,G,B Color for the TARA Targets (usually red)// EHSICDIInfo=ON|OFF Display the CDI Waypoint Information in the EHSI in addition to the PFD ///////////////////// RTU Settings:////////////////////// RTU1Pages=1,2 Pages available for RTU1 unit (1= RADIOS / 2= AUDIO PANEL / 3= EFIS/ 4= EFIS2)// RTU1Com=1 Default to COM1NAV1 or COM2NAV2 at startup// RTU2Pages=1,3 Pages available for RTU2 unit// RTU2Com=2 Default to COM1NAV1 or COM2NAV2 at startup// RTUMaster=ON|OFF if ON, the RTU audio panel has priority over FS2002 audio panel settings/////////////////////// Other Settings://////////////////////// GPWS=ON | OFF Activate the GPWS// GPWSLandingFlaps= Flaps angle considered the landing flaps configuration. Uses the translated flaps table to match the EICAS// EFISFans=ON | OFF Activate the background ambient EFIS fan sound// GEARWind=ON | OFF Activate the background wind noise when gear is down// SoundVolume= Overall Gauge Sound Volume (0 to 100 percent)// YokeAPDisco=ON | OFF Activate the Yoke Mounted (button 1) AP Disco command// NoFrame=ON | OFF Set to render a screen only gauge to ease panel bitmap integration//// EADIPopup= POPUP EADI Panel Window Ident number (used for both the included simicon and the screen clickspot)// EHSIPopup= POPUP EHSI Panel Window Ident number// EICASPopup= POPUP EICAS Panel Window Ident number// RTU1Popup= POPUP RTU1 Panel Window Ident number// RTU2Popup= POPUP RTU2 Panel Window Ident number//// EADIPopupAlt= Alternate Window Ident number to toggle when right clicking the EADI screen// EHSIPopupAlt= Alternate Window Ident number to toggle when right clicking the EHSI screen// EICASPopupAlt= Alternate Window Ident number to toggle when right clicking the EICAS screen//// PopupMaster=YES|NO When set to YES, the main panel EFIS displays are frozen when their popup windows are open// ClearMain=YES|NO (When PopupMaster is YES) set to YES also clears the frozen main EFIS when the popup windows are open.//// FDAVail=YES|NO When set to YES, the Flight Director is displayed when the FS F/D is armed.///////////////////////// Extended V Table:////////////////////////// [LEAR45.VSpeeds] Extended VSpeeds Tables//// Flaps.x= Flaps position in degrees for the set (configuration # x= 0,1,2...14)// Weight.x.y= Weight entry in the table (y = 0,1,2...49) for the corresponding flaps setting (x)// // Table speed entries values: (weight in fuel units,V1,VR,V2)// 5000,107,118,129////////////////////////// Extended VS Table://///////////////////////// [LEAR45.VStall] Extended Stall Speeds Tables - replace "LEAR45" in this example with "local" when the INI file// is in the local aircraft folder//// Flaps.x= Flaps position in degrees for the set (configuration # x= 0,1,2...14)// Weight.x.y= Weight entry in the table (y = 0,1,2...49) for the corresponding flaps setting (x)// // Table speed entries values: (weight in fuel units,VS0,VS1)// 5000,102,112////////////////////////////////// [Keyboard] Jet Line 4 Keyboard shortcuts//// Function_Name= set a keyboard shortcut to a function. NB: KNOBO_ = outer knob and KNOBI_ = inner knob,// followed with the direction (either L left or R right)//// each function supports a single or dual shortcut, in the form CTRL+SHIFT+key//// to configure a shortcut, write the key after the = sign:// example EADI_ATT_INC=A will increase the Attitude Indicator horizontal reference with CTRL+SHIFT+A//// when set as EADI_ATT_INC=G,A this is a dual shortcut, requiring to first press CTRL+SHIFT+G then CTRL+SHIFT+A// This is best seen as a primary shortcut to select a device, then a secondary shortcut to select a function.//// In order not to assign a shortcut, simply write nothing after the = sign.////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this