Thanks Gentlemen, I used FSUIPC and they work.I now can operate the King 350 Throttles, Props, and Mixtures from my Flightsin Yoke USB.Minor irritation: The Prop controls only go up approx half way.The throttle and mixture controls go up all the way.A solution for the proper prop movement Greatly appreciated.Thank you both.Jim Alcorn

Hi Jim,It sounds like the prop range isn't working as expected. In FSUIPC, are the values of a similar + and - value (from memory around 512) to the throttle and mixture? If they aren't then there be your problem. Just re-set the prop axis in FSUIPC and all should be well.If they are the same (or similar) values then FS could be overwriting the fs2002.cfg file, joystick section. To stop FS doing this, add:LOCKED=1To the joystick section. Refer page 11 of the FSUIPC manual for more detail.Hope this helps,Andy (YSCB)

Hi Andy, I added * Locked=1 * to each section of the Fs2002 config file. The throttles and mixtures are correct.The prop controls only go up to 7040. I also read up about this in the Advanced User file.I must be missing sonething.I do appreciate you taking the time to assist me with this.Thanks.Jim Alcorn

Hi again, Prop settings now fixed.Had to set prop sensitivity to max inside fs2002 joystick settings.Now everything operating perfectly.Thanks again.JImbo747