Program Reversers

[Guest]

Has anyone programed Reversers using FSUIPC. I am using a USB CH yoke with 3 levers. I want to program thru FSUPIC reversers. What number do I do I use to add the reversers. Thanks you.David AlbrightFAA Flight dispatcherSingle and Mult-engine rated pilot

[Guest]

Hi David,Yes, I have a CH yoke and use FSUIPC to program the reversers. I strongly recommend you read the manual first.From memory, all you need to do is:1) Find the correct page (map 1 throttle to X engines)2) Push the throttle full forward and hit the top set button3) Pull the throttle fully backwards and hit the bottom set button4) Put the throttle about 1/2" (~1cm) from full back and hit idle buttonThe idle is now set at 1/2" from stop and pulling back further will engage reversers.If you are unhappy with the setting, just hit reset on the idle and change the spot. I had to fiddle with it a bit and you need a reasonable sized range for it to work effectively.Andy (YSCB)