Jump to content

Sign in to follow this  
Guest

C4TO Problem

Recommended Posts

Guest

Hello, I haven't used FlyII in a while but I thought with the newer version of C4TO available I'd give it a try.After installing the version 3 and related patches I compiled a flightplan using FS Build and fired up FLyII. I started the ATC session by using ALT-F and it confirmed that a new session was starting. I then used auto tune to change the frequency and it did change. When I hit ALT-C to check in I get no response.No static or anything. Has anyone seen this before? Am i missing something very basic? Any help would be appreciated.Regards,Mike W

Share this post


Link to post
Share on other sites
Guest dajackman

I test the patches that are being released, but for day to day use of C4TO, I use the old tried and tested version.

Share this post


Link to post
Share on other sites
Guest pilotsim7828

I also use the OLD & TIRED version of C4TO, Becuase it does not work well for me, And believe me . I have tried everything to get this to workJeff Akins

Share this post


Link to post
Share on other sites
Guest

Thanks for the response guys.I guess the question is does it work for anybody?Regards,Mike W

Share this post


Link to post
Share on other sites
Guest Eagle

I use it and it works well for me.What I would like to have would be the ability of the program to pick up all the airports in a flight plan. At present it will pick up the departing and ending airport and none of the airports in between.

Share this post


Link to post
Share on other sites
Guest desmondw

Hi Folks, yes I am having the same problem, I am told to change to centre on XXX.XX, I try tuning it manually & try to check in but just get static & a pop up message in the bottom left of the screen telling me to tune to the frequency I have just been told to change from, after several minutes I try to auto tune again & it changes to the frequency I was told to tune to so I try to check in but the same as you I get no reply, static or anything, then a long time later I suddenly get N????? loud & clear, contact centre on YYY.YY. Also it seems to to get locked up at the approach controller, today it was approximately when I should have been told that I was 8 miles from the ILS, I just kept getting N???? & nothing more. I keep going back to the old Version 2 to get a complete trip in.Hope this make sense to somebody.Desmond

Share this post


Link to post
Share on other sites
Guest

For whatever it's worth,if the author of C4TO checks in or if there is anyone with working knowledge of this version,here is a copy of my C4TO log.Begin C4TO LogVersion = 3.3Aircraft Information Name = B737-500 Registration = customac Heavy = 1FlightPlan Information *COMPLETE ROUTE* CLEVELAND HOPKINS INTL Comm Channels APP = 123.850 ATIS = 127.850 DEP = 118.150 GND = 121.700 CLEVELAND = 122.200 UNICOM = 122.950 TWR = 120.900 CLNC = 125.050 NAVAID AKRON Bearing = 129 Distance = 34.4 Frequency = 114.400 PITTSBURGH INTL Bearing = 134 Distance = 57.6 Comm Channels ATIS = 127.250 CLNC = 126.750 DEP = 127.950 GND = 121.900 ALTOONA = 122.100 TWR = 119.100 UNICOM = 122.950 APP = 120.875 *END OF ROUTE* Total distance = 92.1 Departure Airport ID: KCLE Arrival Airport ID: KPIT Requested en route altitude is: 17000 Initial Course is: 129Flight Plan Frequencies Clearance Delivery = 125.050 Departure Ground Control = 121.700 Departure Tower = 120.900 Departure Control = 118.150 Center = 125.800 Approach Control = 120.875 Arrival Tower = 119.100 Arrival Ground Control = 121.900 Departure CTAF = 0.000 Departure MULTICOM = 122.950 Arrival CTAF = 0.000 Arrival MULTICOM = 122.950 UNICOM = 122.800End C4TO LogRegards,Mike W

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...