Tavarinho

Try to uninstall only the audio driver whit GURU3D (in safe mode) and reboot. 

Let Windows install the new one.

It´s solves the problem here.

Any progress about F1 GTN750/650?

8 hours ago, joepoway said:

I'm not sure.

If you successfully installed the new version when you launch he F1 GTN CONFIG tool does it show the list of all the default aircraft if it doesn't something is wrong with the install.

If it does show in the list and you followed the first part of the instruction above does the GTN 750 show in the C172 panel?

If it does but isn't on make sure you turned the device on with the "on knob"

Joe

Where is this "on knob" sr? I can´t turn on GTN750 in my A2a Comanche.

I insist:

" the enhanced power management feature of Windows 8.1 was causing the device to receive less power than needed." 

I think is the same thing in W10.

Just disable the problematic feature: http://uraster.com/de-ch/produkte/usbenhancedpowermanagerdisabler.aspx

I have cessna rudder pedals, cessna yoke, cessna trim and two throttles quadrants working without problems in W10 just after disable enhanced power management feature whit Uraster´program.

Google for USBEnhancedPowerManagementDisabler:

http://uraster.com/de-ch/produkte/usbenhancedpowermanagerdisabler.aspx

Same here, very frustrated.

- Texture size: In all static themes and in global automatic mode the texture size selected by the user is fully respected. In "Full Dynamics" mode, several clouds may have different textures (of different size each). So if for example you have selected texture size 2048, some cumulus congestus clouds may be 2048 (as they need to be sharper), but softer overcast stratus ones may only be 512 (cause they actually don't need more). In Full Dynamics you can get both of these clouds in the same "scene". The selected texture size (in our example 2048) in this case, behaves as the "Maximum allowable texture size". So, you'll get 2048 or less.

Thank you, this is a very important information. In my system, I note that "non 32 bit textures" or "DXT textures" causes a serious FPS´s hit. So, in my case, I selected "global automatic" in the intention of to secure load only 32-bit clouds´s textures.

I just bought a 4k monitor and have been having some AA issues as well.  4x MSAA and 4x SGSS works in eliminating just about everything, but it absolutely cripples my performance on a 1060 and i5 6600k OC to 4.4ghz.  2x for both gets me much better performance but there is still a decent amount of shimmering with lights at night and thin objects such as fences and towers.  Even 4x MSAA alone takes a hit of about 5-10 FPS for me compared to 2x.  I'm still experimenting.  

Try 4x SuperSample (no Sparse Grid) in NI (enhance)  and 4xMS in P3d.

Set your monitor to 30Hz and set FPS to unlimited in Prepar3d, also turn on VSinc and triple buffering in P3d.  Note that if you can´t sustain 30 fps in P3d you´ll continue whit stutters in this configuration. Otherwise, if your hardware can mantain 30 FPS you´ll free stutters.

Try 4x AF in P3d , here it´s seems to give more performance near heavy clouds.

I'm trying to install with the newest v3 installers into p3d v3.1. I keep getting these errors: 1) an error occured while executing install action #150. Installation will be rolled back, 2) access to the path prepar3d pilrem.exe was denied. I'm hesitant to use Pilots' site as I appears it may be hacked. Has anyone encountered these issues? 

Same here!... How did you solve the issue? ...

My Fs runs smoother with 32 bit clouds than DXT5 clouds...

Don't know why but it does...

Me too.. In fact, after select 32bit clouds in REX soft cloud´s setting, the sttuters went way... Thank you!

No more problems, everything is ok.

Thank you!

I´ll check and pay attention.

Thanks!

Sorry, but I was talking about the PREFLIGHT PROCEDURES, in "Before Start Checklist to the line".

How I said, every time the checklist reachs the item "flight deck windows & cockpit door"  (SOP 3) the FO start the APU whitout ask first. The FO simply says "starting APU".

It´s a problem in case the APU is already running (airports whitout GPU).

Is it a chance to choices in "Approach briefing" like you said influence the preflight flows?

Thanks again!

Hello!

SOP 3: the FO turns on the APU whitout ask me... He does this every time time we reached the item "flight deck Windows e cockpit door" at the "before star checklist to the line", regardless of the APU is running already.

Did I miss something?

Many thanks!

Thanks, Mike.

I did a clean install W10 and saitek beta drivers to cesnna rudder pedals, cesnna yoke and cesnna trim wheel.

All of them are working very weel, include the trim wheel, the most complicated hardware to "talk" whit W10.

Unfortunally, i can´t localize the throttle quadrant beta driver to W10, so i have to disconnect it from my computer.

i keep waiting for the throtlle quadrant beta driver.

:mellow:

I was guied from Saitek account in Twitter to this link about  Saitek beta drivers for yoke, TQ, rudders and trim, last modification 18/11/2015:

ftp://ftp.saitek.com/pub/software/beta/Windows10/

Anyone already install it? I wiil perform a clean install for Windows and almost turn back to W7, unless these drivers works well.

Thanks!