Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Whew! it's hot up here!

Featured Replies

I made flight from Tunis (DTTA) to Dakar (GOOY) yesterday and had a slight issue with the temperatures:Climbing out of DTTA I had a temp of +22

I've been getting the same thing. I thought it was just a one off, but now that I have started an around the world, every country, tour (currently working the South Pacific) it happens just about every flight.eg. right now I am enroute from Nauru to Marshall Islands (524nm) in my trusty old (new!) 737NG, and after 32 minutes of flight I am only at FL352 climbing for FL410 at a lazy 300fpm. Fuel / cargo weight is just fine for a FL410 cruise (currently 119.2Klbs GW). TAT is 8C and OAT is -23C. Back at FL260, TAT was a hot 24C (didn't check OAT then).My AS2004 flight log shows (for a FL410 cruise level):ANAUNINB 0.5 52 53 94 13 -50.7 450 440 1MARTI 280.1 20 21 94 13 -50.7 450 444 37PKMJ 244.2 20 22 82 26 -51.4 450 433 33 ----- ----- 524.8 71m 1.18HCurrent winds aloft are:FL030: 060/05 (29.0) FL060: 064/06 (23.0) FL090: 068/07 (17.0)FL120: 072/08 (11.0) FL180: 076/09 (5.0) FL240: 080/10 (-1.0)FL300: 084/11 (-7.0) FL340: 088/12 (-13.0) FL390: 092/13 (-19.0)BTW I am running the MR1 beta in offline mode (TAF processing off), but I was getting the same behaviour with the update 1 alpha. I also tried three other wx files with similar results.I guess it simply comes down to two questions: 1. Should the actual winds aloft temps be this high (ie. -19C at FL390)?2. Why do the flight log temps differ so much from the actual temps experienced in flight? eg. -50.7C planned at MARTI, but only -30C was realised (yes, I finally made it to FL410 by MARTI).Gary

9800X3D | 4090 | 64GB | 2+1TB NVME | 2TB SSD | 2TB HDD | 85/50/43” TVs | Quest 3 | DOF H3 Motion Rig | Buttkicker | T.16000M Flight Kit

MSFS @ 4K Ultra DLSS Performance FG 80 FPS |  VR VDXR Godlike 80Hz SSW | MSFS VR DLSS Quality, Ultra Preset - Windows 11

Acer Nitro 5 | i5-11400H | RTX 3060 6 GB | 32GB DDR4 | 15.6" FHD IPS 144Hz | 2 x 512 GB SSD | Windows 11

Bump. Jim/Damien any comment, specifcally re Question 2?

9800X3D | 4090 | 64GB | 2+1TB NVME | 2TB SSD | 2TB HDD | 85/50/43” TVs | Quest 3 | DOF H3 Motion Rig | Buttkicker | T.16000M Flight Kit

MSFS @ 4K Ultra DLSS Performance FG 80 FPS |  VR VDXR Godlike 80Hz SSW | MSFS VR DLSS Quality, Ultra Preset - Windows 11

Acer Nitro 5 | i5-11400H | RTX 3060 6 GB | 32GB DDR4 | 15.6" FHD IPS 144Hz | 2 x 512 GB SSD | Windows 11

OK: something has been introduced into the code causing this to happen. Damian is aware and will be back in a few! I know it's hard to climb to flight level with those kinds of temps and we'll get it straightened out ASAP. Hope this helps,JimActiveSky Support

Thanks Jim. Just wanted to make sure it was on the 'to do' list, along with the other MR1 beta issues. BTW, since my world tour has taken me into US airspace, MR1 beta has been taking mucho time (ie. up to a minute) to write data to FS, and being non-responsive as an application in the process. Didn't start happening until I arrived at Honolulu from Samoa.Gary

9800X3D | 4090 | 64GB | 2+1TB NVME | 2TB SSD | 2TB HDD | 85/50/43” TVs | Quest 3 | DOF H3 Motion Rig | Buttkicker | T.16000M Flight Kit

MSFS @ 4K Ultra DLSS Performance FG 80 FPS |  VR VDXR Godlike 80Hz SSW | MSFS VR DLSS Quality, Ultra Preset - Windows 11

Acer Nitro 5 | i5-11400H | RTX 3060 6 GB | 32GB DDR4 | 15.6" FHD IPS 144Hz | 2 x 512 GB SSD | Windows 11

The write time is normal for right now. Not sure if that will change.Hope this helps,JimActiveSky Support

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.