Jump to content
Sign in to follow this  
Guest Tin Triangle

Vulcan Gear Deployment Issue

Recommended Posts

Guest Tin Triangle

Firstly, I would like to congratulate you for creating such an excellent Vulcan for FS. It is outstanding.There seems to be a problem with the gear deployment in FS9, as the gear will only extend once the aircraft speed is below 170kts, rather than the correct value of 270kts. It would seem that perhaps this speed has been entered incorrectly, as the gear would extend at the correct maximum speed of 270kts in FS2002.Can this be fixed, as it is very annoying since the gear can only be extended very late in the landing approach? In fact, at high weights, the incorrect limiting speed of 170kts becomes almost equivalent to the landing threshold speed.Any help would be appreciated.

Share this post


Link to post
Guest Waltm

I love this aircraft, but I have the same problem with the landing gear. In fact, if I try to lower it above 170 KIAS, it "jams" and then refuses to lower under any circumstances (maybe that's an RTFM issue?)Thanks.

Share this post


Link to post
Guest Waltm

FYI, here's a fix that works for me (thanks to the folks at the aircraft and panel design fourm!).If you're up to it, open the aircraft.cfg file (make a backup first ;) in the Vulcan aircraft folder. In aircraft config you will see a category named [contact_points]. Replace the first three entries immediately below with the following:point.0=1, 25.30, 0.0, -9.8, 2061.9, 0.0, 2.50, 60.0, 1.00, 2.5, 0.17, 7.0, 8.0, 0.0, 220.0,250.0point.1=1,-10.70, -19.0, -9.2, 2162.6, 1.0, 2.00, 0.00, 1.20, 5.0, 0.87, 10.0, 9.0, 2.0, 220.0,250.0point.2=1,-10.70, 19.0, -9.2, 2162.6, 2.0, 2.00, 0.00, 1.20, 5.0, 0.87, 9.3, 10.3, 3.0, 220.0,250.0This sets the minimum gear deployment speed to 220 KIAS and the extended gear damage speed to 250 KIAS.Enjoy.-- Walt

Share this post


Link to post
Guest Tin Triangle

Thanks for the fix. I should have noticed that when I was altering the gear heights!For other users who want to fix this, the gear deployment speed should be set to 270kts, as per the specification of the RAF/Avro Flight Crew Manual, and the damage speed set to a value you find reasonable that is above 270kts.Happy flying.

Share this post


Link to post
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...