Hi.I have an add-on a/c that I use quite often, and I have aliased the panel to one of the HJG KC135 aircraft.Everything is working perfectly, except that the wing views are a little too high.They are in the right location, and I have a good viewpoint, but there just too high above the wing.Could someone please tell me how to lower the view point a little, IE which part in the views section am I looking for.Many thanks.I have posted the view details below.[VIEWS]VIEW_FORWARD_WINDOWS=MAIN_PANEL,115VIEW_FORWARD_UP_WINDOWS=30,80,115VIEW_DOWN_WINDOWS=30,80,115VIEW_FORWARD_RIGHT_WINDOWS=31,115VIEW_RIGHT_WINDOWS=32,115VIEW_REAR_RIGHT_WINDOWS=34,115VIEW_REAR_WINDOWS=34,115VIEW_REAR_LEFT_WINDOWS=35,115VIEW_LEFT_WINDOWS=36,115VIEW_FORWARD_LEFT_WINDOWS=37,115VIEW_AUX_00_WINDOWS=38,115VIEW_AUX_01_WINDOWS=39,115VIEW_AUX_02_WINDOWS=33,115,116,117VIEW_AUX_03_WINDOWS=40,115,116,117VIEW_FORWARD_ZOOM=0.8VIEW_FORWARD_DIR=9.9,0.0,0.0VIEW_FORWARD_UP_ZOOM=0.8VIEW_FORWARD_UP_DIR=-30.0,0.0,30.0VIEW_FORWARD_UP_EYE=1,0,1VIEW_DOWN_ZOOM=0.8VIEW_DOWN_DIR=-30.0,0.0,30.0VIEW_DOWN_EYE=1,0,1VIEW_REAR_RIGHT_ZOOM=1.0VIEW_REAR_RIGHT_DIR=4.0,0.0,120.0VIEW_FORWARD_RIGHT_ZOOM=0.8VIEW_FORWARD_RIGHT_DIR=4.0,0.0,45.0//VIEW_FORWARD_RIGHT_EYE=1,0,1VIEW_RIGHT_ZOOM=0.8VIEW_RIGHT_DIR=4.0,0.0,90.0//VIEW_RIGHT_EYE=1.5,0,0VIEW_REAR_ZOOM=0.8VIEW_REAR_DIR=4.0,0.0,180.0VIEW_REAR_LEFT_ZOOM=0.8VIEW_REAR_LEFT_DIR=4.0,0.0,225.0//VIEW_REAR_LEFT_EYE=-1.0,0,0VIEW_LEFT_ZOOM=0.8VIEW_LEFT_DIR=4.0,0.0,270.0//VIEW_LEFT_EYE=-0.5,0,0VIEW_FORWARD_LEFT_ZOOM=0.8VIEW_FORWARD_LEFT_DIR=0.0,0.0,315.0//VIEW_FORWARD_LEFT_EYE=-0.5,0,0.5VIEW_AUX_00_ZOOM=0.6VIEW_AUX_00_DIR=10.0,0.0,85.0VIEW_AUX_00_EYE=0,2.1,-26VIEW_AUX_01_ZOOM=0.6VIEW_AUX_01_DIR=10.0,0.0,250.0VIEW_AUX_01_EYE=0,2.5,-9.5VIEW_AUX_02_ZOOM=0.8VIEW_AUX_02_DIR=4.0,0.0,135.0VIEW_AUX_03_ZOOM=0.8VIEW_AUX_03_DIR=4.0,0.0,135.0

All lines,ended with "_EYE" are responsible for observer position coordinates...Which one of three is for "seat height" I dont remember-just try to play "change'n see result" game...First-check wich VIEW is for wingviews and change coordinates for this view.