Sign in to follow this  
Guest _Sheva_

Loading stops at 53%

Recommended Posts

Hello everybody,Im new TP user. When I try to run my FS9 the laoding stops at 53%. Hope I do everything correctly.1. Start>Programs>TileProxy>Load filter driver and run proxyUser2. Start FS > Fly NowBelow is my proxyuser.ini file## Start a line with # to comment it out.# Turn your text editor's Word Wrapping OFF for editing this document.## Read the manual for help with configuration. Do not contact the# author about the configuration for particular services. Thank you.#[TileProxy]# Enable or disable worldwide photographic scenery coverage (Yes/True/On to enable)master_enable=On# Offline Mode - No network access will occur (Yes/True/On to enable)offline_mode=No# The distance up to which LOD 15 (1.1m/pixel) would be loaded (only applies to FS9 and FSX RTM)lod_distance=1000# Resolution limiter: 15 = 1.1m/pixel, 14 = 2.3m/pixel, 13 = 4.75m/pixel# Lower resolutions load faster, but are visually less appealing.max_lod=15# Number of Tiles to read-ahead. Speeds up communication between proxyUser and tileproxy.syspreload=15# The currently active service is configured here. Only ONE active source please.# The other source statements should be commented out.#source=Acme Globe Service#source=Virtual Earth#source=Google Earthsource=Yahoo Maps# The sources you want to be able to switch from the GUI menu.# Separate the list entries with | and enclose in quotes. Make sure the# names specified here are valid services which are defined below.# You may want to rename the services according to your preference,# but make sure you replace all occurences of the strings.menu_sources="Service Example 1|Service Example 2|Service Example 3"## Here begin the service specific configurations#[Acme Globe Service]cache_folder=cache.acmenetwork_module=libnettilemodule_config="conn=20|rate=2.0|verbose=0|server=http://server*.acmeglobe.com|path=/terraintile?pos=%s&v=10|quad=ABCD|balance=0123|agent=Mozilla/4.0 (compatible; The TileProxy Project)"min_level=9max_level=17color_hack=Nocolor_level=0bulk_extend=25[Virtual Earth]cache_folder=cache.service1network_module=libnettilemodule_config="conn=20|rate=2.0|verbose=0|server=http://a*.ortho.tiles.virtualearth.net|path=/tiles/a%s.jpeg?g=52|quad=0123|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"min_level=9max_level=17level_mapping=9,10,11,12,14,14,15,16,17#level_mapping=9,10,11,14,14,14,15,16,17color_hack=Yescolor_level=13bulk_extend=50[Google Earth]cache_folder=cache.service2network_module=libnettilemodule_config="conn=20|rate=2.0|verbose=1|server=http://kh*.google.com|path=/kh?t=t%s&n=404&v=17|quad=qrts|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"min_level=5max_level=17color_hack=Nocolor_level=0bulk_extend=50[Yahoo Maps]cache_folder=....cache.service3network_module=libnettilemodule_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=1.5&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"min_level=5max_level=17color_hack=Nocolor_level=0bulk_extend=50

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Hi Sheva,Are you sure FS isn't still loading? Depending on your setup, it can take anywhere from 5-15 minutes for all the textures to load, during which time the FS "progress window" pauses for a long time at certain load percentages. At 52-53% is where FS9 in particular first stops for a time to load the many tiles requested. To verify whether TP is still loading and everything is as should be always start FS in "windowed" mode so you can monitor TP's progress as illustrated in the screenshot below: http://forums.avsim.net/user_files/174614.jpgTo get FS to start in "windowed" mode every time, just make sure you SHUT IT DOWN in windowed mode each time you leave an FS session. This way if there's an error in the load, lockouts, or other anomalies you will know by monitoring the TP load window. It's a good way to see your tile request data and other TP activities when you tweak your settings to optimize the program. Once in FS you can toggle between windowed to full screen mode by pressing "Alt+Enter".

Share this post


Link to post
Share on other sites

Thanks for answering that one. You're providing some excellent community service there with your web site and the INI file you're hosting.

Share this post


Link to post
Share on other sites

What location are you trying to load and with what server? My suspicion is the area isn't well represented for the chosen texture provider images in that area. And, if it IS represented, perhaps not at the resolution that FS is requesting...or the server data could be corrupted as well. When flying near the Mexican border for instance using Y**** Maps (best for USA coverage), I had similar errors. When I flew north they stopped.It's always a good idea to PREVIEW the area you wish to fly in a stadard web browser by checking out how well (and at what resolution and color) an area is represented by the three major mapping services TP uses. Choose the one you like best. http://maps.google.comhttp://maps.live.comhttp://maps.yahoo.com(Once there, choose the "Satellite" image tabs to see the aerial textures.) If it's not obvious that's the problem, try changing your chosen texture service in the ProxyUser.ini file (as explained here: http://www.edtruthan.com/tileproxy/ini or, try changing locations and see if the errors continue.

Share this post


Link to post
Share on other sites

I am worried about TP continuously losing the connection to FS9. This happened to me only on occasion. But here it's like ... after every single tile!And the missing metadata error message would normally only occur if previous versions of Tileproxy have created the World folder, followed by an upgrade to TP Beta 5.

Share this post


Link to post
Share on other sites

Speaking of which, I usually get the "disconnect" indication anywhere from every 2 to 10 "packets" of textures, but the "reconnect" seems virtually instantaneous, and texture loading continues just fine, so it seems not to reduce the overall function of TP, with the possible exception that the initial tile access rate starts low on the next request...but that seems to be normal anyway...http://forums.avsim.net/user_files/174632.jpg

Share this post


Link to post
Share on other sites

Yes, and Im getting continuously this. Turned it off after 25 minutes.beznzvuby9.jpg

Share this post


Link to post
Share on other sites

Yes, doesn't seem to work for you. 25 minutes ot load 144 tiles.In fact it should be more like 5 minutes to load 20000 tiles. Something is interfering with Tileproxy on your machine. I don't know what and why... sorryChristian

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this