RFP-Posky merge:flaps problem

Howdy folks!Decided o bring out my 742 out of the hangar and noticed a problem i have with the flapstruts.Is it normal that they extend all the way down when selecting just a Flap 5 setting?(note pic)I also downloaded the latest model files from the posky site and my flaps section in the aircraft.cfg looks like this:[flaps.0]type = 1 // 1 - tail, 2 - leadspan-outboard = 0.8 // 0.0 .. 1.0extending-time = 25 // secondsflaps-position.0 = 0 // degreesflaps-position.1 = 5 // degreesflaps-position.2 = 10 // degreesflaps-position.3 = 15 // degreesflaps-position.4 = 20 // degreesflaps-position.5 = 25 // degreesflaps-position.6 = 30 // degreesdamaging-speed = 200 // KIASblowout-speed = 250 // KIASlift_scalar = 0.28drag_scalar = 0.40pitch_scalar= 0.45system_type = 1 //Hydraulic[flaps.1]type = 1 // 1 - tail, 2 - leadspan-outboard = 0.2 // 0.0 .. 1.0extending-time = 25 // secondsflaps-position.0 = 0 // degreesflaps-position.1 = 5 // degreesflaps-position.2 = 10 // degreesflaps-position.3 = 15 // degreesflaps-position.4 = 20 // degreesflaps-position.5 = 25 // degreesflaps-position.6 = 30 // degreesdamaging-speed = 200 // KIASblowout-speed = 250 // KIASlift_scalar = 0.28drag_scalar = 0.40pitch_scalar= 0.45system_type = 1 //Hydraulic[flaps.2]type = 2 // 1 - tail, 2 - leadspan-outboard = 0.8 // 0.0 .. 1.0extending-time = 12 // secondsflaps-position.0 = 0 // degreesflaps-position.1 = 10.0 // degreesflaps-position.2 = 20.0 // degreesflaps-position.3 = 20.0 // degreesflaps-position.4 = 20.0 // degreesflaps-position.5 = 20.0 // degreesflaps-position.6 = 20.0 // degreesdamaging-speed = 250 // KIASblowout-speed = 300 // KIASlift_scalar = 0.28drag_scalar = 0.40pitch_scalar= 0.45system_type = 1 //Hydraulic[flaps.3]type = 2 // 1 - tail, 2 - leadspan-outboard = 0.5 // 0.0 .. 1.0extending-time = 12 // secondsflaps-position.0 = 0 // degreesflaps-position.1 = 20.0 // degreesflaps-position.2 = 20.0 // degreesflaps-position.3 = 20.0 // degreesflaps-position.4 = 20.0 // degreesflaps-position.5 = 20.0 // degreesflaps-position.6 = 20.0 // degreesdamaging-speed = 250 // KIASblowout-speed = 300 // KIASlift_scalar = 0.28drag_scalar = 0.40pitch_scalar= 0.45system_type = 1 //Hydraulic[flaps.4]type = 2 // 1 - tail, 2 - leadspan-outboard = 0.2 // 0.0 .. 1.0extending-time = 12 // secondsflaps-position.0 = 0 // degreesflaps-position.1 = 20.0 // degreesflaps-position.2 = 20.0 // degreesflaps-position.3 = 20.0 // degreesflaps-position.4 = 20.0 // degreesflaps-position.5 = 20.0 // degreesflaps-position.6 = 20.0 // degreesdamaging-speed = 250 // KIASblowout-speed = 300 // KIASlift_scalar = 0.28drag_scalar = 0.40pitch_scalar= 0.45system_type = 1 hope someone can give me some help here Smiley.Regards,Steven