Jump to content

Archived

This topic is now archived and is closed to further replies.

Guest Rex247

Blurries in DX10

Recommended Posts

Guest Rex247

I was experimenting with DX10 today and no matter what change I make with the AF, all of my tiles are coming out blurry. I was running in unlimited frames mode and I read that lowering the target frame rate would fix it, but I got the same result at 20.DX9:fsx2010-09-2617-58-47-21.jpgDX10:fsx2010-12-0521-45-56-56.jpgHere's my TP file:master_enable=Ondiskless_mode=Offoffline_mode=Nomax_lod=15preload_min_lod=9preload_max_lod=15max_contexts=512water_mask=Onwater_blending=Onblend_distance=1000.0blend_exponent=1.0alpha_min=0.2678alpha_max=0.7water_rgb=#000D1Awater_smoothing=Offwater_threshold=0.25cache_bytes_limit=1024000000cache_tiles_limit=150000source=Service Example 3menu_sources="Service Example 1|Service Example 2|Service Example 3|Service Example 4"enable_hooking=Noenable_dx9hook=Noenable_movingmap=Nomovingmap_alpha=255movingmap_color=#ff000000movingmap_xpos=88movingmap_ypos=15movingmap_width=50movingmap_height=80movingmap_radius=60[service Example 3]cache_folder=C:\Program Files\Microsoft Games\cache.service3network_module=libnettilemodule_config="conn=20|rate=2.0|verbose=0|server=****************************************x=%x&y=%y&z=%z&v=%v&t=a|agent=Mozilla/4.0"min_level=9max_level=15color_hack=Nocolor_level=0bulk_extend=25map_version=1.9Here's my CFG://Testing DX10[GRAPHICS]TEXTURE_MAX_LOAD=1024TEXTURE_QUALITY=3IMAGE_QUALITY=0NUM_LIGHTS=8AIRCRAFT_SHADOWS=1AIRCRAFT_REFLECTIONS=1COCKPIT_HIGH_LOD=1LANDING_LIGHTS=1AC_SELF_SHADOW=1EFFECTS_QUALITY=2GROUND_SHADOWS=0//ALLOW_SHADER_30=1//SHADER_CACHE_VERSION=9872430[sCENERY]//SUNGLARE=1LENSFLARE=1DAWN_DUSK_SMOOTHING=1IMAGE_COMPLEXITY=0[DISPLAY]BLOOM_EFFECTS=0SKINNED_ANIMATIONS=1TEXTURE_BANDWIDTH_MULT=400UPPER_FRAMERATE_LIMIT=30[MAIN]Maximized=0DisablePreload=1[PANELS]QUICKTIPS=0PANEL_OPACITY=100[TERRAIN]LOD_RADIUS=4.500000MESH_COMPLEXITY=100MESH_RESOLUTION=22TEXTURE_RESOLUTION=25AUTOGEN_DENSITY=0DETAIL_TEXTURE=1WATER_EFFECTS=6[Display.Device.ATI Radeon HD 5800 Series.0]MipBias=6Anisotropic=1[WEATHER]CLOUD_DRAW_DISTANCE=3DETAILED_CLOUDS=1CLOUD_COVERAGE_DENSITY=7THERMAL_VISUALS=0DownloadWindsAloft=1DisableTurbulence=0[TrafficManager]AirlineDensity=0GADensity=0FreewayDensity=0ShipsAndFerriesDensity=0LeisureBoatsDensity=0IFROnly=0AIRPORT_SCENERY_DENSITY=0[bufferPools]PoolSize=5000000Hope you can help!

Share this post


Link to post
Share on other sites

Rex,some of your settings are not "matched"Start with FSX: TEXTURE_RESOLUTION=25you have it set for 1m resolution. Your lod_max is correctly matched max_lod=15but....cache_folder=C:\Program Files\.....network_module=libnettilemodule_config="conn=20|rate=2.0|min_level=9max_level=15.You've told the server to give you a max resolution of 5m (level 15).This should be max_level=17; This "level" number should always be 2 higher than the lod numbers to keep them matched.HOWEVER: you can leave this level max set to 17 ( min level 10 is the lowest res that TP makes or FSX displays - you only use 9 to replace 10 if you are level mapping (which you don't seem to be doing)I used to change the lod_max and level_max together until I finally realized that it isn't necessary. The highest res that TP will make for you is set by lod_max. So long as level is adequate to get the highest you will ever ask for, it doesn't need to be changed.My recommendation? Setmin_level=10max_level=19and change ONLY the LOD_MAX at the top (and FSX, as needed)Hint: don't "judge" 1m imagery from below 1000-1500', or 2m from below 3000'. Blurry can also come from the long time it takes to bring the nearest scenery into 'focus', especially if there are a lot of other settings on high.BTW, those pix look pretty good. If you think it's not up to standards, you'd have to specify precise lat/lon so I/we can go look at the same spot for comparison. Maybe it's as good as it can be right there...Loyd

Share this post


Link to post
Share on other sites
Guest Rex247

It's back to being beautiful, thanks Lliaudais!fsx2010-12-0600-09-21-25.jpgWell TP's fixed, time to go fix everything else.

Share this post


Link to post
Share on other sites
It's back to being beautiful, thanks Lliaudais!fsx2010-12-0600-09-21-25.jpgWell TP's fixed, time to go fix everything else.
Ahhh. I know that feeling. The new pic does look more crisp. Glad that did it.L.

Share this post


Link to post
Share on other sites

×
×
  • Create New...