ERJ Bill Grabowskis Panel

[Guest lalo lolo1]

I still have one problem I haven't been able to solve. The max airspeed gets set at 320 knots and doesn't matter how high I go it remains the same. When I go faster than that the airspeed indicator shows the numbers in red and I keep getting the annoying "high speed" message. I tried both indicated airspeed and true airspeed in the realism settings with the same result.Also as per the manual, it says that when the VS is on, the airspeed autopilot mode won't work, but when you reach cruise altitude it will respond again. Not in my panel. The airspeed works while climbing, of course when I climb manually, but when I get to cruise altitude it doesn't work. Do anyone have an idea on how to solve this. Thanks again, Leo

[Gnominator 0]

As far as I know, the ERJ do not have an autothrottle system.Setting an airspeed during climb only makes the autopilot adjust the climb speed according to your power/throttle settings.Example: You set 80% N1 throttle and an airspeed of 270 knots. The aircraft climbs with the calculated climb speed it can climb with without falling below 270 knots.As soon as you reach your top of climb the aircraft will stop climbing and will increase speed as your throttel still set to 80% N1.I repeat: There is no autothrottle function in the panel nor is it in the real aircraft (as far as I know, of course).This is the reason, why your airspeed increases above 320 knots.To solve your problem you'll have to control your power settings during the whole flight.