Hello friends :)------------------737-400 in FS2000------------------The throttle display in the 737-400 is in its own separate window that can be repositioned & resized.However I would like to embed it permanently into the panel itself. I do not use the RMI on the aircraft at all so Id like to get rid of it and embed the throttle display in its place.Problem is I dont know how to go about it as its entries in the PANEL.CFG file are not like the other "ordinary" entries I've fiddled with. For example I embedded the digital clock from the Mooney into the 737's panel, but that was easy as the clock was not linked to a popup window - but the throttle display is.Ive gotten rid of the RMI. Now theres a hole where it used to be and thats where I wanna put the throttle display.Could u guys please advise! :)Thanx loads! My PANEL.CFG is below:---------------------------------------------------------------------// Panel Configuration file// Boeing 737-400// Copyright © 1999 Microsoft Corporation. All rights reserved.[Window Titles]window00=Main Panelwindow01=Radio StackWindow02=GPSwindow03=Throttle Quadrantwindow04=Overhead Panelwindow05=CompassFixed Window30=Forward RightFixed Window31=RightFixed Window32=Rear RightFixed Window33=RearFixed Window34=Rear LeftFixed Window35=LeftFixed Window36=Forward LeftFixed Window37=Up[Views]VIEW_FORWARD_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,20,COMPASS_PANELVIEW_FORWARD_RIGHT_WINDOWS=30VIEW_RIGHT_WINDOWS=31VIEW_REAR_RIGHT_ZOOM=1.5VIEW_REAR_RIGHT_WINDOWS=32VIEW_REAR_ZOOM=1.5VIEW_REAR_WINDOWS=33VIEW_REAR_LEFT_ZOOM=1.5VIEW_REAR_LEFT_WINDOWS=34VIEW_LEFT_WINDOWS=35VIEW_FORWARD_LEFT_WINDOWS=36VIEW_UP_WINDOWS=37VIEW_UP_DIR=-15.0, 0.0, 0.0[Window00]file=Main_640.bmpfile_1024=Main_1024.bmpsize_mm=640position=7visible=1ident=MAIN_PANELgauge00=737-400!Airspeed, 0, 64gauge01=737-400!Flaps, 586, 64gauge02=737-400!Altimeter, 237, 45gauge03=737-400!Vertical Speed, 238, 128gauge04=737-400!Fuel Quantity, 236, 204gauge05=737-400!Main Set, 335, 85gauge06=737-400!OMI Lights, 1, 153gauge07=737-400!Oil, 468, 85gauge08=737-400!Clock, 17, 147gauge09=737-400!RMI, 1, 211gauge10=737-400!HSI, 86, 162gauge11=737-400!ADI, 85, 39gauge12=737-400!Gear Lever, 586, 217gauge13=737-400!Nose Gear Light, 594, 180gauge14=737-400!Left Gear Light, 579, 198gauge15=737-400!Right Gear Light, 609, 198gauge16=737-400!Reverser Unlocked Left, 354, 68gauge17=737-400!Reverser Unlocked Right, 416, 68gauge18=737-400!AT Lim, 385, 68gauge19=737-400!Low Oil Left, 458, 68gauge20=737-400!Low Oil Right, 519, 68gauge21=737-400!Start Valve Left, 489, 68gauge22=737-400!Start Valve Right, 549, 68gauge23=737-400!Flaps Ext, 609, 115gauge24=737-400!Flaps Transit, 579, 115gauge25=737-400!Autopilot, 336, 11gauge26=737-400!Pitch Trim, 305, 144gauge27=737-400!Aileron Trim Indicator, 242, 261gauge28=Mooney_Bravo!Clock, 240, 275gauge29=737-400!Rudder Trim Indicator, 285, 261gauge30=737-400!Rudder Trim Knob, 290, 276gauge31=737-400!Nav GPS Switch, 306, 17gauge32=737-400!Avionics Master Switch, 239, 300gauge33=737-400!Autobrake, 581, 134gauge34=737-400!Avionics Display Toggle, 222, 10gauge35=737-400!GPS Display Toggle, 236, 10gauge36=737-400!Throttle Display Toggle, 250, 10gauge37=737-400!Compass Display Toggle, 264, 10[Window01]size_mm=127,265position=0visible=0BACKGROUND_COLOR=16,16,16ident=RADIO_STACK_PANELgauge00=737-400!Comm 1, 0, 0gauge01=737-400!Nav 1, 0, 54gauge02=737-400!Nav 2, 0, 108gauge03=737-400!Transponder, 0, 162gauge04=737-400!ADF, 0, 211[Window02]size_mm=150,250position=8BACKGROUND_COLOR=16,16,16VISIBLE=0ident=GPS_PANELgauge00=gps!gps,0,0,150,250[Window03]size_mm=203window_size_ratio=1.0position=0BACKGROUND_COLOR=16,16,16visible=0ident=THROTTLE_PANELgauge00=737-400!Throttle Quadrant, 0, 0[Window04]file=Upper_640.bmpfile_1024=Upper_1024.bmpsize_mm=327position=2visible=1ident=OVERHEAD_PANELgauge00=737-400!Strobe Lights, 18, 13gauge01=737-400!Navigation Lights, 45, 13gauge02=737-400!Landing Lights, 67, 13gauge03=737-400!Beacon Lights, 91, 13gauge04=737-400!Deice Switch, 117, 13gauge05=737-400!Pitot Heat, 143, 13gauge06=737-400!Fuel Crossfeed, 167, 14gauge07=737-400!Engine Start Left, 219, 17gauge08=737-400!Engine Start Right, 273, 17[Window05]file=737_compass.bmpsize_mm=70position=1visible=0ident=COMPASS_PANELgauge00=Magnetic_Compass!Magnetic-Compass,0,0[Fixed Window30]file=FORWARD_RIGHT.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=30[Fixed Window31]file=RIGHT.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=31[Fixed Window32]file=REAR_RIGHT.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=32[Fixed Window33]file=REAR.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=33[Fixed Window34]file=REAR_LEFT.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=34[Fixed Window35]file=LEFT.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=35[Fixed Window36]file=FORWARD_LEFT.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=36[Fixed Window37]file=UP.bmpvisible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=37[Default View]X=0Y=0SIZE_X=8192SIZE_Y=2600

Having gotten rid of the RMI you could just put the throttle gauge where it was:gauge09=737-400!Throttle Quadrant,1,211,86,99

Jim - Thanx loads! Your entry worked like a charm! The throttles are embedded exactly where I wanted them! :)Now how did u make that so easy....looks like I was making things more complicated then they really were!TY!