Corrected Start up!

Corrected START UP (Cold and dark or ready to start (from 3)

MilViz B737-200 Quick Start Procedure

• 1) BATTERY – ON and close cover
  2) APU – START (two left clicks)
  2a) If GEN1 OFF BUS lighted – GEN1 cycle (left click)
  • If GEN2 OFF BUS lighted – GEN2 cycle (left click)
    If APU GEN OFF BUS lighted – APU GEN Left and Right ON
  3) APU BLEED AIR – ON
  4) ISOLATION VALVE – CLOSE (right click)
  5) START VALVE ARMING – Open cover and switch ON
  6) ENGINE START – Left Switch to GRD
  7) When N2 reaches 22% - Left CUTOFF Lever to IDLE
  
  • Verify left ENGINE START switch returned to OFF
  8) ENGINE START – Right Switch to GRD
  
  • When N2 reaches 22% - Right CUTOFF Lever to IDLE
    Verify left ENGINE START switch returned to OFF
  9) START VALVE ARMING – Close Cover
  10) BLEED – Left and Right Engine Bleed Air Switches to ON
  11) L PACK – ON
  
  • R PACK – ON
  12) GASPER FAN – ON
  13) ISOLATION VALVE – AUTO (left click)
  14) APU BLEED AIR – OFF
  15) PITOT STATIC HEAT – A and B to ON
  16) YAW DAMPER – ON
  17) APU – OFF
  18) GEN1 and GEN2 – Cycle (left click)
  19) MASTER CAUTION – Press to clear