April 10, 20179 yr Hello, I love using the GTN 750 with GA aircraft and have had no issues, today I picked up the X-Trident Bell 412 helicopter. I tried different settings in the GTN menu, but the helo will not track a GPS signal from the GTN 750. When I disable the GTN 750 an use the default 530 it picks it up with no problem. I tried changing the OBS setting on the 750, etc. Nothing seems to work, the autopilot tries to pick up the track, but fails. Any ideas? Thanks for any info in advance. My YouTube Channel
April 10, 20179 yr Go to the Bell 412 plugin, open the Options file and make sure "REALITYXP 1" is set. options:- PANEL_1_X 0.0763 PANEL_1_Y -0.533 PANEL_1_Z -1.97 PANEL_1_PSI 0 PANEL_1_THETA 72.2 AILERON_TRIM_ZERO 0.012754 ELEVATOR_TRIM_ZERO 0.128363 RUDDER_TRIM_ZERO 0 JOY_SAFE_MODE 0 HIDE_GUNS 1 HIDE_PILOT 0 HIDE_COPILOT 1 HIDE_CREW 1 HIDE_PATIENT 1 USE_CUSTOM_THROTTLE 1 CUSTOM_THROTTLE_TYPE 3 ENABLE_SAITEK_PANELS 1 THROTTLE_FORCE_REVERSE 0 COLLECTIVE_FORCE_REVERSE 0 MOD_ON 1 THROTTLE_MAX_OVERRIDE 0 THROTTLE_MIN_OVERRIDE 0 SAS_LEVEL 0 VIEW_TYPE 1000 YAW_GAIN_HDG 0.01 YAW_GAING 0.06 CUSTOM_FAILURES 0 ALT_MODE_REALISTIC 1 3_AXES 0 3_AXES_GAIN 8 REALITYXP 1
September 15, 20187 yr When we use the GTN750 ILS approach, ILS Glide Slope is really slow and follows the center line of about 1 dot deviation.Any experiences
November 27, 20196 yr On 4/10/2017 at 5:48 PM, bluebell2 said: Go to the Bell 412 plugin, open the Options file and make sure "REALITYXP 1" is set. options:- PANEL_1_X 0.0763 PANEL_1_Y -0.533 PANEL_1_Z -1.97 PANEL_1_PSI 0 PANEL_1_THETA 72.2 AILERON_TRIM_ZERO 0.012754 ELEVATOR_TRIM_ZERO 0.128363 RUDDER_TRIM_ZERO 0 JOY_SAFE_MODE 0 HIDE_GUNS 1 HIDE_PILOT 0 HIDE_COPILOT 1 HIDE_CREW 1 HIDE_PATIENT 1 USE_CUSTOM_THROTTLE 1 CUSTOM_THROTTLE_TYPE 3 ENABLE_SAITEK_PANELS 1 THROTTLE_FORCE_REVERSE 0 COLLECTIVE_FORCE_REVERSE 0 MOD_ON 1 THROTTLE_MAX_OVERRIDE 0 THROTTLE_MIN_OVERRIDE 0 SAS_LEVEL 0 VIEW_TYPE 1000 YAW_GAIN_HDG 0.01 YAW_GAING 0.06 CUSTOM_FAILURES 0 ALT_MODE_REALISTIC 1 3_AXES 0 3_AXES_GAIN 8 REALITYXP 1 Thanks for the tip!! That one little line makes all the difference! Working a treat.
Archived
This topic is now archived and is closed to further replies.