May 30, 20179 yr Looking for some guidance on bringing two mixed sets of ram together as one. The ram is the Corsair Dominator series: 2x4GB 2133 c9-11-10-27 1.50v 2x4GB 3000 c12-14-14-36 1.65v My system: ASUS Z87 PRO running the I5 4670 @ 4.7ghz My goal: 16GB system ram running somewhere between 2400 C9 to 2600 C10 ROG Maximus X Apex Z370 -- 8086 @ 5.3 / NB 5.0 -- GSkill @ 4133 c17-17-32~Cr1 1.42v -- EVGA 1080Ti 6393 -- ROG PG279Q 1440P 150hz -- Corsair H100i V2 --Samsung EVO 850(s) -- Windows7 Pro 64 --Corsair 750X Ken C
May 30, 20179 yr You have four slots, 2 pair dual channel , if you put the lowest rated mem in dual channel pair 1 slots. The xmp settings is read from slot1 ( same timings on all slots ) don't set advanced with differnt settings on all slots , Do I very often when binning mems , if you get it to work you can test if the higher rated in slot 1. Or 2600 mhz with xmp from the 3000mhz mems , Not sure if the 3000mhz mems is Samsung think that can be hynix chip , cross might fingers that it is same type of chip in both pairs. The is easy way is to Start with 2 sticks dual channel one from each set if you get them to work togheter in dual channel swaping them to test the differnt xmp first then test with all four. Did that on ddr3 and now ddr4 , example run trident z 3600 c15 xmp on ripjaws 3200 c14 Good luck http://
May 31, 20179 yr Author Glad I asked. Thanks! ROG Maximus X Apex Z370 -- 8086 @ 5.3 / NB 5.0 -- GSkill @ 4133 c17-17-32~Cr1 1.42v -- EVGA 1080Ti 6393 -- ROG PG279Q 1440P 150hz -- Corsair H100i V2 --Samsung EVO 850(s) -- Windows7 Pro 64 --Corsair 750X Ken C
Archived
This topic is now archived and is closed to further replies.