DC Design Concorde contact points

Hi guys ,

Anybody knows whitch one from this contakt points are:

1. Gates or Gatecar for the front door,

2. Bagage rear Door.

[CONTACT_POINTS]
static_pitch =0.2
static_cg_height =15.13
gear_system_type =1
tailwheel_lock =0
max_number_of_points =22
hyd_need_power_to_function =1                                                                                                                   
gear_locked_on_ground =0
gear_locked_above_speed =-1
max_speed_full_steering = 10
max_speed_decreasing_steering = 42 ; Defines the speed above which the angle of steering stops decreasing (in feet/second).
min_available_steering_angle_pct = 0.2 ; Defines the percentage of steering which will always be available even above max_speed_decreasing_steering (in percent over 100).
max_speed_full_steering_castering = 16 ; Defines the speed under which the full angle of steering is available for free castering wheels (in feet/second).
max_speed_decreasing_steering_castering = 40 ; Defines the speed above which the angle of steering stops decreasing for free castering wheels  (in feet/second).
min_castering_angle = 0.05236 ; Defines the minimum angle a free castering wheel can take (in radians).
max_castering_angle = 3.14159265358979 ; Defines the maximum angle a free castering wheel can take (in radians).

point.0 = 1, 30.5, 0, -15.85, 1181, 0, 1.29, 75, 0.555, 2, 0.33, 9, 9.4, 0, 0, 0, 2 
point.1 = 1, -32.5, -13, -16.3, 1875, 1, 1.96, 0, 0.637, 2, 0.33, 9.7, 9, 2, 0, 0, 2 
point.2 = 1, -32.5, 13, -16.3, 1875, 2, 1.96, 0, 0.637, 2, 0.33, 9.2, 9.9, 3, 0, 0, 2 
point.3 = 2, -84.4, 0, -1.07, 1388, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1 
point.4 = 1, -90, 0, -2.5, 1875, 1, 1.96, 0, 0.637, 2, 0.33, 9.7, 9, 1, 0, 0, 2 
point.5 = 2, -48.5, 41.25, -4.5, 350, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0, 1
point.6 = 2, 92.5, 0, -2.2, 350, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1
point.7 = 2, 35.5, 0, 6.5, 500, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1
point.8 = 2, -28.5, -20, -7.25, 500, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0, 1
point.9= 2, -28.5, 20, -7.25, 500, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0, 1
point.10= 2, -32.268314, -0.000003, -2.125712, 500, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1
point.11= 2, -68, 0, 4.1, 750, 0, 0, 0, 0, 0, 0, 0, 0, 7, 0, 0, 1
point.12= 2, -82, 0, 23.5, 350, 0, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 1
point.13= 2, -110, 0, 5, 350, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0, 1
point.14 = 2, -40.5, -20, -7.25, 500, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0, 1
point.15= 2, -40.5, 20, -7.25, 500, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0, 1
point.16 = 2, 0.5, 0, -5, 500, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1
point.17 = 2, -30.5, 0, -5, 500, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1
point.18 = 2, -48.5, -41.25, -4.5, 350, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0, 1
point.19 = 2, 40, 0, -5, 500, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1
point.20 = 2, 0, 0, 6.5, 500, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1
point.21 = 2, -50, 0, 6.5, 500, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 1

emergency_extension_type=1
steering_time_constants= 3, 5

I want to change them because they don't fit properly and that bothers me..

Thanks for help !

cheers 😉