Hello everyone!

Like many of you, I have problems with the A320 fenix.

For the Airbus TCA Quadran from Thustmaster

The hardware and sofware quadran are not in phase.
For the moment I use the default key association

The only two things that are problematic :
- the flap lever does not move at all
-the left and right throttles.
When they are in IDLE on the hardware, they are not in IDLE in the simulation.

I know that there is a calibration to be done by the FMC but it only works if, before that, the hardware position = the software position.

I have read many possible solutions.

-Let the configuration operator of MS2020 or SPAD.NEX?
I had no more luck with spad 

If any of you have any advice, I am interested.

Even if it's a spad.next configuration 😛 or even FSUIPC coordinates for the joystick and flaps 🙂

I really thought that a throttle for airbusd would make the airbus work easily.

 

Have a good weekend live from France!

 

1 hour ago, alexbz said:

Hello everyone!

Like many of you, I have problems with the A320 fenix.

For the Airbus TCA Quadran from Thustmaster

[...]

I really thought that a throttle for airbusd would make the airbus work easily.

Download and install the firmware update driver files (Drivers - Package 2021_TFHT_2 + Firmware [System Requirement: Windows® 10 / 11]) from Thrustmaster's TCA throttle quadrant support page
Follow *carefully* the firmware update procedure guide

After you have performed those steps and restarted your PC, *carefully* follow the throttle calibration guide.

Your throttle quadrant should work well after you have done these actions.