tbird

Hi,

 

I had the same issue, but in my case it was that I had choosen the Majestic q400 as default aircraft when I started P3D v4 in stead of the F22 Raptor. When I used the MJ aircraft and did not change the livery, everything was fine, but if i did a livery change of the MJ, I lost the audiotest and could not hear anything from PF or anyone from the crew.

After going back to the original F22 Raptor as a default startup aircraft in P3D menue, everyhting is just fine.

 

regards

Reid

I have the same problem, but only with the left engine.

Well, then we both have the same problem.A ticket is deliverd to PMDG support and so should you.My throttle quad has been calibrated and the problem persistRegardsReid S

Hi!I have a similar problem after engine start.I always start from C&D and after engine start, the left engine won't spool up if i move the throttleleaver forward. (TQ6 throttlequadrant)the right engine works as it should after engine start.What I have noticed tho, is that the oil temp on the left engine is only 9*C after ignition. I have to use ctrl+E so I can get this engine to work properly.The right engine has an oil temp way over 9*C after this has lit up. I've seen around 20-30*C after ignition and slowly rising after engine start.regadsReid S

Well guys, that did the trick!I changed the line in simconnect.xml from "IPv4" over to "auto" and that did really solve my problem. I have always excluded virus scanning of any of my software programs that are associated with FS since all of these programs that I use can be used over a network.Now I can close ASE on my client and reconnect, I can close FSX on my server and reconnect!Thanks alot!Reid

Thanks Jim!I appreciate it alot since it's quite annoying.Reid

HiHave anyone experienced connection problems between ASE and FSX on networked computers?I have some issues with ASE and FSX over my network that is abit strange.At the first startup of ASE on my client, I load a flightplan in to ASE, starts FSX on my server and everything is just fine. But if I close ASE or FSX they do not re-connect again if I restart ASE or FSXWhen I use FS9 (WideFS) no problem, so I think this problem has something to do with Simconnect SP2.I have to restart both computers to get them to re-connect over simconnect when I use ASE and FSXclient;winXP 32 SP3, ASE B566, wideFS, Simconnect SP2server;winXP 32 SP3 FSX/FS9, Wideserver, Simconnect SP2thanksReid

HiHave anyone experienced connection problems between ASE and FSX on networked computers?I have some issues with ASE and FSX over my network that is abit strange.At the first startup of ASE on my client, I load a flightplan in to ASE, starts FSX on my server and everything is just fine. But if I close ASE or FSX they do not re-connect again if I restart ASE or FSXWhen I use FS9 (WideFS) no problem, so I think this problem has something to do with Simconnect SP2.I have to restart both computers to get them to re-connect over simconnect when I use ASE and FSXclient;winXP 32 SP3, ASE B566, wideFS, Simconnect SP2server;winXP 32 SP3 FSX/FS9, Wideserver, Simconnect SP2thanksReid

Unfortunately it didn't help. Approaching LOWI Rwy29 in haze - suddenly 'pop' changed to heavy cloud cover :( But thanks for trying to help.

Yes, I've have still the same problem, but i'ts not as severe as it used to be hence the reduced maximumvisibility set to 20, and maximumUppervisibillity set to 20.Could this issue be some hardware configuration?I myself have a GF 8800 GTX graphic card on the FS computer.Does this problem apply to ATI users aswell?Reid

Hi and thanks for answering, I do have the reg version of the FSUPIC and I'll try to do what you suggestThanksReid

Hi there,I've just resently got my self a GF TQ6 throttle and after installing latest driver for this and only assigning the throttle levelers and reversers, my pushbuttons on the CH yoke doesnt work after assigning them in the FS2crew start centre (april 2009). I have the combo version, FS9 and FSX for PMDG MD11What I do have noticed is that when using push button #9 and #10 on the yoke (assigned in the controll centre), I have seen that in the PMDG MD11 aircraft.cfg the FS2Crew sentre have assigned push button #10 and #11. The assignment is for the green and red button.I also have the latest CH driver installed and tripple checked that there is no other assignments for # 9 and # 10 buttons on the yoke. Assignments for key strokes works fine.thanksregardsReid

Hi everyone, I've used ASA since day one and I have also experienced cloud pops in FS9 from the first release.What I have found just recently is that it seems the cloud polps disapear if I turn down the IFR slide below 20 NM --> MaximumVisibilitySM = 20Maybe something to try out.I'm using ASA B435 (beta build), Win XP, client PC, wideFS, FSUPIC reg. versionregardsReid

In FS9.cfg, in the weather section;CLOUD_DRAW_DISTANCE=7 --> set to 12CLOUD_COVERAGE_DENSITY=8 --> set to 12but it might give you loss of FPS.ReidENZV

Hi!I'm running both XP Pro and Home edition.When I'm using my laptop for paintjobs its XP Pro, and on the main stationary PC it's XP Home edition.Thanks for looking in to this!regardsReidENZV

Hi!Im having some problems with the paintkit that has been released for the MD11. I am using Paint Shop Pro 7.04 and I'm getting an error message saying "an undefined error has occured - 565" when i try to load PMDGMD-11F_xxx_xxx.psd filesDoes anyone have any suggestion why I'm getting these messages?Never had these types of errors before, but I have to say that this is the first time i am trying to paint an FSX aircraft.I have painted several other aircrafts for FS9 though.thanksReidENZV

whooa..darn my creditcard is burning in my pocket...lolThe FS2Crew feature is great.enough said;Here is something i did today with this wonderful aircraft;enjoyhttp://home.lyse.net/ReidsFlyZone/PMDG%20MD11F.wmvall the best,reidenzv

Mike, I'll check that out when possible, anyways thanks for the suggestion.ReidENZV

Hi all,Please see attached screenshots of the problem I have on this aircraft;http://home.lyse.net/ReidsFlyZone/slats2.jpghttp://home.lyse.net/ReidsFlyZone/slats.jpgAs you can see the flap indicators shows flap 35 selected and extended in cockpit, but outside it's not.I know that others have similar problems.Any idea what causes this?I've installed the full version, FSX and pending FS9 versionThanksReidENZV

Here is an update;The radio stack is also black and so is the clock on both versions (FS9 and FSX, PAX and Cargo) R

HiI've just purchased the 747 FSX version and after the installation the MCP won't lit up, it's completly black.The same problem is on the FS9 version now.Note, this happens only with the cargo version on both simulators.On PAX version everyhing is working as normal.I have FSX with all updates and I did ran the updater for FS9 after I had installed the Queen of the Skies for FSX.I use Win XP home SP2Does anyone have any idea on whats causing this?ThanksRS

HiEverything is ok now. Was some errors in the simconnect.xml file thats in the SimconnectFile folder.RS

Thanks for the tip Damian.I downloaded and installed ASX SP2 B1106 to no avail.The ASV log is stating this now:14:43:34: Logging Initialized14:43:34: XEngine v1.0.0.329 Copyright

>Hi,>>That looks normal to me unless I am missing something. Does>ASX recognize your current location?>>Thanks,>Jim>>http://www.hifisim.com/banners/hifi-community-sigbanner.jpg>http://www.hifisim.com/hi Jim,To me it looks that ASX is recognising my current location.Reid

Hi and thanks for the answers.I've re-installed everything, including FSX with all servicepacks and ASX still doesn't write the weather to FSXHere is the latest ASX log09:34:34: Logging Initialized09:34:34: XEngine v1.0.0.325 Copyright

HiI am having some major problems to connect the ASX weather engine thats installed on a client to the server PC where i got FSX installed.I have double checked everyting, when I run the AI traffic SDK to test my configuration everyting seems ok.I just cant find the where the problem is.Maybe someone could decode this message I have copied here;20:35:54: Unable to find FSX station list file for backup: Fsserver320gb (e)FSX20:35:54: World Magnetic Model has been loaded...20:35:54: Error loading FSX station database - please make sure FSX is properly installed: Could not find a part of the path 'C:ProgramfilerHiFiXEngineYFSXWeatherwxmapping.bin'.(Error) Source = 20:35:54: Loading additional weather stations...20:35:54: Unable to read in additional stations database from C:ProgramfilerHiFiXEngineASXDownloadStations.dat20:35:54: SimConnect found and initialized20:35:54: Module Found: C:ProgramfilerHiFiXEngineModulesASX.DLL20:35:54: ASX module load commencing...20:35:54: ASX ModuleFolder set to: C:ProgramfilerHiFiXEngineASX20:35:54: ASX settings have been loaded...20:35:55: ASX controls initialized...20:35:55: ASX v0.1.0.1056 Copyright

Problem solved:)I thought I had upgraded GE Pro to v 2.13 but I hadn't.....lolWorks ok now after installing v 2.13