lonewulf

For FSUIPC 4.XX see here: http://www.fsuipc.com/

disregard

Theo,

make sure you have downloaded the latest "FSUIPC WASM Module 0.5.9 + WAPI 0.5.10" from Pete Dowsons's website http://www.fsuipc.com/ , Especially the latest "fsuipc-lvar-module" should be installed into the Community Folder.

Oskar

A few questions from a nerdy and not-so-code-savvy LINDA user, who would like to benefit from these new features with FlyByWire's A320neo:

- Which components EXACTLY are required?
- Where can they be downloaded? (no dead links, please...)
-Where to put all the components?

Or in other words: just a simple guide to retrieve installation information from the patchwork in this thread. Maybe one of you guys has enough patience to explain?

Oskar

Thanks a lot, Andrew. That sounds great !

Is there any chance to get the FD and LS toggle also with a single command for both sides (Capt & Copi)? There is obviously such a function available in the cockpit by RIGHT clicking the respective button, identical to FSL Bus.

In addition to that it would be highly appreciated if the BARO Toggle could also be achieved for BOTH sides by a single click. Of course these are issues which must be solved by Aerosoft, but my hope is still that there are some "hidden" function which would allow such shortcuts...😀Talking about such issues with Aerosoft,s developers directly is simply to no avail, not to say completely useless...

On 9/18/2018 at 8:12 AM, guenseli said:

But we have a switch and the switch is fixed now 😉

Thanks, with V1.11 all is working now perfectly 😀...

Hi Günter,

Thank you very much for the quick release of this module. May I however point to two things that came to my attention:

1) the Prop Heat Toggle command is not working (switch does not move)
2) the GPS/NAV toggle command is missing. The FSX default command is unfortunately not working

Other than that the module works great (as usual). Thanks again!

Oskar

On 22.2.2018 at 0:34 PM, ScotFlieger said:

Thank you lonewulf. I am aware of the 'not enough timers available' message. I do not know the cause and, if it does appear, it can stop LINDA being re-started. However, if you open and close LINDA from within FSUIPC5 you should not get this message.

"Open and close from within FSUIPC5?" If I'm not completely wrong this is the "normal" case if LINDA's option "start  GUI with Sim" is checked. I use this option all the time. Nevertheless I get the above mentioned message. Not that it would worry me too much. So far I haven't seen any detrimental effect on LINDA due to this "final message". Just noteworthy, not to worry...

Oskar

I can confirm, however each time after shutdown there's the message "not enough timers available" popping up. It doesn't happen without LINDA and it doesn't happen with any other A/C. Not a showstopper, but maybe just something worth mentioning...

5 hours ago, guenseli said:

..

Oski, convince me if I should get the CRJ despite these bugs ... 

Yes please ! And if it were only for the basic functions because fiddling with the mouse even for basic flying is definitely "not amusing". There is NO default command working, so I can't even set such basic things like HDG, ALT, SPD etc with my MCP Combo. I'm still wondering that at least the throttles are working...

Oski

Any news on the CRJ Module? It's hardly flyable without...

LS for both and for Oski

v 0.4
FD switches both FD

But takes some time ... it's 747 time first

You mean Capt and FO FD and Capt and FO LS?

Should be no problem

Yes. Presently we have the FD fuction assigned for CAPT ECP, which is used in the VC as LEFT CLICK on the FD (LS) button. Same happens on COPI side. There is however a function using RIGHT CLICK which always activates BOTH FD (LS) buttons at the same time. This was introduced during beta as a convenient tool to avoid swiveling around in the cockpit to activate both FD(LS) switches. A similar function exists for the QNH/STD switching, but this is activated in the setup as rightclick/leftclick (PUSH/PULL) has different effects on the QNH selector.

Hi Günter,

Any chance to find the variable for BOTH FD toggle (right click) and similrarly for BOTH LS toggle ?

Oskar

Anyone going for the FSLabs A320? Would be greatly welcome...

Oskar

Hi Osker

 

Sorry it has been the same issue as before. No MCP to test with. There will a fix out later today.

Thanks Andrew,

No worries. In the meantime I can still manage with 2.7.0 which works fine  :smile:

Oskar

Hi Andrew,

I have just installed LINDA 2.8.0 and ran into a problem with my "old" MCP COMBO. When calling the combo all assignments are empty and furthermore an error Window appears that claims a missing file named "btn_mcp_auser_inact.png". Scanning through the indicated path shows a similar file, but with slightly different naming "btn_mcp_user_inact.png" ISO "btn_mcp_auser_inact.png". Nevertheless renaming this specific file did not cure the problem as most probably also other files/filenamings are affected. Can you have a look into this? Thanks in advance!

Oskar

.

 

Any aidea?

 

Use A2A's Input Configurator...

Oskar

Purrrphect ! I knew you were da man ! Thanks a lot, Günter. Works like a charm now !

Just one short question:

Using the newest version 2.6.3 V3 on an original MCP Combo. All A/C work flawlessly (also all A2A modules) except... when trying to load the new Comanche, the follwing error occurs:

I'm fully aware that there CAN be compatibility issues with the original MCP combo, however this is the only module that refuses to work. Could it be that there is just a small glitch in the new module or do I really have to go back to V1.13 (of course I won't, I would rather do without the Comanche module..) But still, is this really the first incompatibility with the MCP Combo showing up or is there a possible solution? 

Oskar

Generally a nice idea ... that is, why LINDA has a Paypal button

 

All I have read about the iFly 747 is that it is very heavy on frames.

I tried the 737 back then and was also very diappointed in comparison to the PMDG one.

But that is only my opinion, so I let the iFly pass and wait ...

Definitely NOT frames-heavy, at least that's my impression after several flights. I have equal or slighty better frames than with PMDG T7. Nevertheless there is no hurry for a LINDA development as long as NavDataPro is unable to provide Navigational Data Service.... :rolleyes: 

Oskar

While desperately trying to set-up the VRi Airbus FCU with LINDA 2.0 on a friend's computer, there is a general question coming up. Is it possible to set-up LINDA 2.0 without having the original LINDA 1.XX running before? It seems that not all entries are made in the FSUIPC.INI to run LINDA successfully. When I connected the Airbus FCU to my computer (I run the old MCP Combo) and just copy the new LINDA 2.0 files over the existing install of my linda 1.XX I get it to work. No joy however when trying a vanilla install of LINDA 2.0 on another computer.

Btw: as far as I have seen when doing some trials on my computer, the ALT managed (push ALT knob) function does not work. It does nothing, While you can clearly see any VC knob being pushed (SPD, HDG, V/S...), the ALT knob does NOT move at all. Pull is ok - just not push.

Oskar