wbober

Hi,I have A400 and I can not inscribe in Radio(RTU,FMS) VOR1(ILS) frequency below 110.000 MHzI searched in network of solution but without result. How is possible to repair it? Best regards,bober

Hi,I have problem with sounds for An-24 aircrafts in FSX.For Vladimr Zhyhulskiy's An-12BK I have fine AN-26 v.2.0 (by Mike Maarse) package and I don't have Reverse Sounds (indifferently if I press F2 or in Saitek Pro Flight Throttle Quadrant move throttle knob in Reverse position.In all Jets, King Air 350,F1 ATR72 this WORK VERY FINE!)Certainly I checked, all files are in Sound folder, these two(RVR-1.wav and RVR-2.wav) also.For old Samdim An-26 I have "Ivchenko AI-24" package from avsim. Also all files are inside and also no reverse sound effect.But this package works very fine with An-12BK, reverse also!I have found other package of sounds,which in Samdim An-26 reverse works fine but this package is particular nothing.Look at sound.cfg:[JET_ENGINE]type=1flags=2viewpoint=1filename=bearjb4link=xle[xle]type=1flags=2viewpoint=2filename=xbearjb4link=rumble[rumble]type=1flags=4filename=xrumblebearMy favorite aircraft and it depends very on it me, it is Samdim An-26 with Ivchenko Sound!I wrote in this case for author, but I have made no reply. Could you help me? It can is necessary to change some parameters in sound.cfg (or in aircraft.cfg and .air?), I don't know,how make this?I thank for patience very,Best Regards,Wojtek BobrowskiEPKK

>There is so much wrong in that XML that I honestly don't even>know where to begin...>>First, you can NOT set any A:vars... Those are "read>only"...>>Second, a "bool" has only two possible values: zero or one>>Maybe in the morning after I've had some coffee I'll take a>crack at reformatting that into something resembling valid>syntax... ;)Thanks Bill,I tested to remake it on base of EMB170 panel by Uwe Ingber,Hermann Lehmann and Stephan Haering and accommodate for default FSX B738 panel.I work in order to fix considerably this panel.In EMB panel, in section Autopilot it looks so(and works):(A:Eng1 N2 RPM, percent) 60 > if{ (L:Start, number) 1 == (A:Ground Velocity, knot) 70 > && if{ 1 (>L:sound_70, enum) 2 (>L:Start, number) } (L:Start, number) 2 == (A:Ground Velocity, knot) 80 > && if{ 1 (>L:sound_80, enum) 3 (>L:Start, number) } (L:Start, number) 3 == (A:Ground Velocity, knot) 115 > && if{ 1 (>L:sound_V1, enum) 4 (>L:Start, number) } (L:Start, number) 4 == (A:Ground Velocity, knot) 125 > && if{ 1 (>L:sound_Rotate, enum) 5 (>L:Start, number) } (L:Start, number) 5 == (A:Ground Velocity, knot) 140 > && if{ 1 (>L:sound_V2, enum) 6 (>L:Start, number) } } But it does not works in B738.For example callout.xml from this panel works.I will be thankful for assistance.regards,wojtek [email protected]

I have similar problem with "70 knots","80 knots","V1",:Rotate","V2" sounds: (A:Eng1 N2 RPM, percent) 60 > if{ (A:AUTOPILOT THROTTLE ARM, bool) 1 == (A:Ground Velocity, knot) 70 > && if{ 1 (>L:sound_70, enum) 2 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 2 == (A:Ground Velocity, knot) 80 > && if{ 1 (>L:sound_80, enum) 3 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 3 == (A:Ground Velocity, knot) 115 > && if{ 1 (>L:sound_V1, enum) 4 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 4 == (A:Ground Velocity, knot) 125 > && if{ 1 (>L:sound_Rotate, enum) 5 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 5 == (A:Ground Velocity, knot) 140 > && if{ 1 (>L:sound_V2, enum) 6 (>A:AUTOPILOT THROTTLE ARM, bool) } } At speed 70 knots "70 knots" sound appears and begin repeating without end.Does not have next sounds.How is possible it to solve it?wojtekEPKK

Hi,I want to add "click" sound for switches in Overhead.In case below it work very well:375.000,90.00020,20HandLeftSingleTOOLTIPTEXT_CABIN_DOORS1 (>L:AIR_CLICK_1,enum) there is parameter of sound.But in case below: 337.000,90.00020,20HandTOGGLE_AIRCRAFT_EXITLeftSingleTOOLTIPTEXT_CABIN_DOORSmy any changes give of nothing.I made different tests and I can not add it always in casexxx_xxx_xxxCan You help me?Regards,bober

Hi Jim, Thanks for fast answer.It looks so as on photo.Shows difference amongMETAR and TAF.Problems are in such situation additional with displacement the ASX interface on second monitor( I have two monitors).I hope, that you will invent something ;)Best regardsWojtek

Hi,I have a problem with weather download.More or less that third time I receive real weather(METAR).Mostly I receive unfortunately:302350Z 18004KT CAVOK 07/03 Q1023 A 3022 RMK INTERPOLATEDDoes not have meaning or for example EPWA,or EDDT EGKK.Same METAR continuously?! I must try and try to get the right weather. The reinstall of ASX and SP1 doesn`t change anything.Let me know if you have any idea what is going onWojtek XP,ASUS P5GPL-X,PIV 3,2GHz,1,5 GB RAM,RX1650 PRO,Logitech Extreme 3DPro