Jump to content

wbober

Members
 View Profile  See their activity

  • Content Count

    18

  • Donations

    $0.00 

  • Joined

  • Last visited

Posts posted by wbober

  5. Posted

    Hi,

    I made a flight plan in LNM 2.6.7 LZTT-EPLL and exported to FSX - pln format. AS2012 draws all the LZTT-EPLL waypoints and adds direct back to the LZTT. As a result I have 310 nm in AS2012 instead of 183 nm in LNM and in FSX.

    I found in IFR Tatry (LZTT) to Lublinek (EPLL) .pln
    probably a bug:

        <FlightPlan.FlightPlan>
            <Title>LZTT to EPLL</Title>
            <FPType>IFR</FPType>
            <RouteType>HighAlt</RouteType>
            <CruisingAlt>18000</CruisingAlt>
            <DepartureID>LZTT</DepartureID>
            <DepartureLLA>N49° 4' 25.00",E20° 14' 28.00",+002356.00</DepartureLLA>
            <DestinationID>EPLL</DestinationID>
            <DestinationLLA>N49° 4' 25.00",E20° 14' 28.00",+002356.00</DestinationLLA>

    There should probably be:

    N51° 43' 18.77",E19° 23' 53.28",+000607.00

    just like at the end of the plan:

            <ATCWaypoint id="EPLL">
                <ATCWaypointType>Airport</ATCWaypointType>
                <WorldPosition>N51° 43' 18.77",E19° 23' 53.28",+000607.00</WorldPosition>
                <ICAO>
                    <ICAOIdent>EPLL</ICAOIdent>
                </ICAO>
            </ATCWaypoint>
        </FlightPlan.FlightPlan>
    </SimBase.Document>

    The plan is displayed correctly on the plane (PMDG JS41), RC4 and FSX.

    Other plans from version 2.6.7 have the same bug, Plans from version 2.6.6 do not have this bug.

    Regards

    wojtek

     

  9. Posted · Edited by wbober

    23 hours ago, SteveFx said:

    Can you install 5.2 again and try the following.

    Go into the debug dialog via top menu  File->Debug

    Then untick v5 legacy at the bottom Left and press Apply.

    Then tell me if it behaves differently - this isnt guaranteed to fix it but i want to know what happens

    Then try a 2nd test - go back into debug and tick v5 legacy and press apply

    Then go into the Legacy dialog and select Dawn Dusk Smoothing and press apply

    Then tell me what happens with those settings

     

    So I did as you suggested and:1. untick v5 legacy - fix it,

    2.tick v5 legacy and select Dawn Dusk Smoothing - fix it.

    I left the 2nd version and for now it is ok but I will still test because my computer and FSX have "bipolar disorder" and it can happen differently 😉

    Thanks for helping Steve,
    Wojtek

     

     

  11. Posted

    hi, after installing version 5.2.137 DX10SF I have a problem with night lighting of fs9 AI aircrafts tail. It looks like:

    https://photos.app.goo.gl/2bTbD5ePRtLAheHg7

    I didn't change any settings. So I returned to my old version 3.4.108 - in the photo:

    https://photos.app.goo.gl/k9xaMREwhFupd3wt9

    I have the FSX DVD version (of course sp1 and sp2).
    Can anything be done?

    Best regards from EPKK

    wojtek

  13. Posted

    Hi,I have problem with sounds for An-24 aircrafts in FSX.For Vladimr Zhyhulskiy's An-12BK I have fine AN-26 v.2.0 (by Mike Maarse) package and I don't have Reverse Sounds (indifferently if I press F2 or in Saitek Pro Flight Throttle Quadrant move throttle knob in Reverse position.In all Jets, King Air 350,F1 ATR72 this WORK VERY FINE!)Certainly I checked, all files are in Sound folder, these two(RVR-1.wav and RVR-2.wav) also.For old Samdim An-26 I have "Ivchenko AI-24" package from avsim. Also all files are inside and also no reverse sound effect.But this package works very fine with An-12BK, reverse also!I have found other package of sounds,which in Samdim An-26 reverse works fine but this package is particular nothing.Look at sound.cfg:[JET_ENGINE]type=1flags=2viewpoint=1filename=bearjb4link=xle[xle]type=1flags=2viewpoint=2filename=xbearjb4link=rumble[rumble]type=1flags=4filename=xrumblebearMy favorite aircraft and it depends very on it me, it is Samdim An-26 with Ivchenko Sound!I wrote in this case for author, but I have made no reply. Could you help me? It can is necessary to change some parameters in sound.cfg (or in aircraft.cfg and .air?), I don't know,how make this?I thank for patience very,Best Regards,Wojtek BobrowskiEPKK

  14. Posted

    >There is so much wrong in that XML that I honestly don't even>know where to begin...>>First, you can NOT set any A:vars... Those are "read>only"...>>Second, a "bool" has only two possible values: zero or one>>Maybe in the morning after I've had some coffee I'll take a>crack at reformatting that into something resembling valid>syntax... ;)Thanks Bill,I tested to remake it on base of EMB170 panel by Uwe Ingber,Hermann Lehmann and Stephan Haering and accommodate for default FSX B738 panel.I work in order to fix considerably this panel.In EMB panel, in section Autopilot it looks so(and works):(A:Eng1 N2 RPM, percent) 60 > if{ (L:Start, number) 1 == (A:Ground Velocity, knot) 70 > && if{ 1 (>L:sound_70, enum) 2 (>L:Start, number) } (L:Start, number) 2 == (A:Ground Velocity, knot) 80 > && if{ 1 (>L:sound_80, enum) 3 (>L:Start, number) } (L:Start, number) 3 == (A:Ground Velocity, knot) 115 > && if{ 1 (>L:sound_V1, enum) 4 (>L:Start, number) } (L:Start, number) 4 == (A:Ground Velocity, knot) 125 > && if{ 1 (>L:sound_Rotate, enum) 5 (>L:Start, number) } (L:Start, number) 5 == (A:Ground Velocity, knot) 140 > && if{ 1 (>L:sound_V2, enum) 6 (>L:Start, number) } } But it does not works in B738.For example callout.xml from this panel works.I will be thankful for assistance.regards,wojtek bobrowskiwbober@interia.pl

  15. Posted

    I have similar problem with "70 knots","80 knots","V1",:Rotate","V2" sounds: (A:Eng1 N2 RPM, percent) 60 > if{ (A:AUTOPILOT THROTTLE ARM, bool) 1 == (A:Ground Velocity, knot) 70 > && if{ 1 (>L:sound_70, enum) 2 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 2 == (A:Ground Velocity, knot) 80 > && if{ 1 (>L:sound_80, enum) 3 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 3 == (A:Ground Velocity, knot) 115 > && if{ 1 (>L:sound_V1, enum) 4 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 4 == (A:Ground Velocity, knot) 125 > && if{ 1 (>L:sound_Rotate, enum) 5 (>A:AUTOPILOT THROTTLE ARM, bool) } (A:AUTOPILOT THROTTLE ARM, bool) 5 == (A:Ground Velocity, knot) 140 > && if{ 1 (>L:sound_V2, enum) 6 (>A:AUTOPILOT THROTTLE ARM, bool) } } At speed 70 knots "70 knots" sound appears and begin repeating without end.Does not have next sounds.How is possible it to solve it?wojtekEPKK

  16. Posted

    Hi,I want to add "click" sound for switches in Overhead.In case below it work very well:375.000,90.00020,20HandLeftSingleTOOLTIPTEXT_CABIN_DOORS1 (>L:AIR_CLICK_1,enum) there is parameter of sound.But in case below: 337.000,90.00020,20HandTOGGLE_AIRCRAFT_EXITLeftSingleTOOLTIPTEXT_CABIN_DOORSmy any changes give of nothing.I made different tests and I can not add it always in casexxx_xxx_xxxCan You help me?Regards,bober

  18. Posted

    Hi,I have a problem with weather download.More or less that third time I receive real weather(METAR).Mostly I receive unfortunately:302350Z 18004KT CAVOK 07/03 Q1023 A 3022 RMK INTERPOLATEDDoes not have meaning or for example EPWA,or EDDT EGKK.Same METAR continuously?! I must try and try to get the right weather. The reinstall of ASX and SP1 doesn`t change anything.Let me know if you have any idea what is going onWojtek XP,ASUS P5GPL-X,PIV 3,2GHz,1,5 GB RAM,RX1650 PRO,Logitech Extreme 3DPro

×
×
  • Create New...