TTurbo

Ok i will investigate on my settings.

Thanks

Tom.

Hi there!,i'm unable too see the exhaust effect on engine and APU,is a P3D restricted effect,or FSX idees can see too???.

Thanks.

Tom Chevler

Thanks a lot!,all clear now,and last question,with autobrakes correctly set before app,on the landing roll i don't get "brakes"message line in fsx,but testing without resversers can confirm the plane is braking and decelerating,my question again,is a new code???,in all other PMDG planes when autobrakes are working i can confirm also the "brakes" line in fsx like braking with the pedals.

Eustt.

Hi to all!,really want to say congrats to all PMDG team for such a great plane!.

On my first test flight i found three little issues i want crosscheck with other pilots.

1.-I can't reset both (Radio and Baro) minimuns previously setted pressing the RST button on the efis control panel,like the 737 or 777(it does ok in both planes)

2.-Reviewing on the L FMC the STARS in flight for arrival,when passing pages too see all arrivals for any runway for example (2/5 page) the FMC goes up automatically to page (1/5)showing again the begining of the arrivals page.

3.-The MAP or CHART light at the bottom of the copilot right side window flickers when setted to maximun intensity,the captain map light is ok.

Can anybody check this?,thanks a lot.

Eusty.

Hi to all,kindly request if anyone can make a lua script to get the ivap transponder stby and C with the pmdg js41 radio panel control.I don´t know how to make it.

Thanks in advance.

Alex.

Hi to all,kindly request if anyone can make a lua script to get the ivap transponder stby and C with the pmdg js41 radio panel control.I don´t know how to make it.

Thanks in advance.

Alex.

That´s is!!!!Thanks sir.

...waiting pmdg ticket support response.....since yesterday.

Alex.

Kyle or anybody,can test this for me,please???.

1.Set fsx time to dawn(and don´t touch the hour),load de pmdg js41 and open the FCS pop-up(autopilot) and check if you have ALT and the below bottons wich i haven´t in my first post.

2.Set the panel flood lights to on(switch on the left side pilot panel) and go to copilot panel and try to rotate the selector( red circle )and try to switch between VOR2/NDB2/LNAV2 and see what happens.

Thanks in advance guys.

At the afternoon i will try to reinstall it and see what it happens...If not works ok i get a support ticket.

Thanks.

Hi to all again,i had discovered two more issues and i want to crosscheck if anybody is suffering this error too.

When selecting a dawn setting(time) in FSX time the FCS pop-up panel sees like this,with or without lights,setting day or dusk and night the panel sees ok with or without cockpit lights.

And if i go to copilot panel and select panel flood light to on the selector for VOR2/NDB2/LNAV2 doesn´t work visually(rotating).

Very dissapointed with this.

Alex.

Copy that,thanks a lot it solves my questions!

Alex

Hi to all,first let me know what an amazing plane,but after install and read carefully the tutorial,i have two little "issues":

First:Is the transponder mode linked to IVAP client???,I mean when setting in the radio panel on the JS4100 is supposed to set on ivap un mode "C"???,i can´t.

Second:After set the route on FMC/MCDU and select the arc/map mode and LNAV in both sides i can see the route displayed on navigation display,but i can´t see the fix names on the route until airborne,is this normal???.

Thanks Alex.

Understood the I3 4360 3,70GHZ is better than I7 4790 3,60GHZ???

But my really question is quicker for FSX an (I7 4790 AT 3,60GHZ) than (I3 4360 AT 3,70GHZ),in FPS terms?,I Know i7 have more cores than i3 but a less slower clock speed (i7 3,6ghz vs i3 3,7ghz) the more clock speed from i3 is better?or an i7 with 4 cores but with less core speed give best results???.....

Alex

Hi,i don´t understand very well this...I have W7 64bits and all installed(FSX,addons) the only thing i have is plug the new processor (I7) and see all is ok.Then i go into windows open fsx and the FPS problem comes.Is supossed to be more quickly and I7 3,6ghz than an I3 with 3,7ghz in FSX.???

Hi to all,i have and I3 4360 (3,70GHZ) with 8GB RAM and GTX750OC.My fsx performs not bad at all (i get 30 fps in some addons airports and fluctuating from 24-25 to 30-35 fps sometimes).I have a tweaked bojote´s FSX.cfg

Recentrly i decided to get a brand new I7 (4790 at 3.6GHZ up to 4.00ghz when in turboboost mode).The surprises was after install the new i7 my fsx performs bad,(with the i3 i get better frames).Now with i7 y have 15-18fps.

I tried to tweak affinity mask to 14 and some other values,i tried to disable HT on BIOS and check a lot of parameters but without good results.

Finally i decided to put i3 again and the system goes into 30-35fps range again.

Whats wrong with this?any tweaks i´m loosing?.It´s suppossed i7 4790 3,6ghz performs better than i3 3,70ghz or not?.

And finally other question,with the "good processor" (i3) is normal get sometimes drops in frames? i get 34-35fps in dense airports or in cruise but sometimes drops to 23-24 and quickly goes up to 35fps again....any tweak for this also???.

Thanks in advance i think if i solve those problems my fsx will get rock solid fps.

Alex.

Yes unfortunally the only thing i can make is roll back to last good know drivers

Enviado desde mi iPhone con Tapatalk

Copy that,thanks Bert!

I give it a try.

Alex.

Hi guys,i´m triying to set up correct my fs9.First of all what would be the best result drivers (GTX550ti) in performance for fs9.Any nvidia inspector recommende setup,to run properly my old school FS9.A question,when play fs9 and my Graphic card overheats to 68-69ª as nvidia inspector says,my screens turns blurry(fonts,lines,etc)until temperature comes down again,is there anyway to avoid this?.

My pc specs.

Q6600 OC 2,9GHZ,8GB RAM 1600mhz,GTX550 ti,windows xp pro 32bits version.

Thanks.

Hi folks,after update my nvidia drivers to last version i get this external texture problem with almost all planes.All was ok until the drivers update,my nvidia inspector settings still the same.

Hi folks,after update my nvidia drivers to last version i get this external texture problem with almost all planes.All was ok until the drivers update,my nvidia inspector settings still the same.

Hi folks,after update my nvidia drivers to last version i get this external texture problem with almost all planes.All was ok until the drivers update,my nvidia inspector settings still the same.

Alex.

Hi again!still configurating to get 100% the 737,but testing landings,with Flaps 40 and Bugs set,speedbrakes armed,when touchdown all works OK,reverses unlocked,speedbrakes extended but i dont know why i get a bucle sound of spoilers lever again and again and again until i set a little bitof throttle bit to get off reversers and spoilers.

Why the speedbrakes lever extend sound comes in a bucle?.

Alex

Now i find it,there was a problem with spoiler axis(prop pitch1) does not match fully retracted in the wing,this little extension don´t cause any warning on T.O,but when on app extending flaps with throttle over idle got this warn,that´s the reason.But now with spoilers fully retracted incruising a little bit the throttle all goes ok.

Thanks.