CraigyW

Hi All,

Maybe someone can help me. I recently updated GSX after it finally started working properly but now I have a problem with the scenery. The default airport scenery and addon scenery are visible together and the system uses the default scenery AFCAD. Everything was fine until I updated GSX and then this problem occurred. I am using Prepar3d 4.5 and the two airports so far are ImagineSims Singapore and MFSG Darwin.

Has anyone else had this problem and what should I do to resolve the issue. 

All suggestions welcome

Cheers

Craig

Hi all

Disregard, I have resolved the problem.

Cheers 

Craig

Hi All

Eric has added a change to his models for Prepar3D V4 where the logo, nav and cabin lights can be always on by making a change to the fuel section in the aircraft config file. Has anyone made these changes to the aircraft config file and if so, what figures did you use for the tank positions etc for the additional tanks?

Cheers

Craig

Hi Oliver

In tried what you suggested but still get the in use message. The BDO scenery just doesn't want to work.

Cheers

Craig

Hi

I have problems with BDO scenery for RJBB and VTSP. The scenery is installed and sits in the Addon Scenery folder in Prepar3d 4.5. When I try to use the scenery, the default scenery is loaded. The scenery isn't listed in the scenery library but if I try to add, I get a dialogue box saying the scenery is already in use. I downloaded the addon manger and neither scenery is listed. When I go to add the scenery, the addon manager also states that the scenery is in use. The scenery is for V4 and is the latest version. Does anyone have any suggestions on how this could be rectified?

Cheers

Craig

Thanks Bob

Rick I downloaded the program and the BDO scenery doesn't appear in the list. If I try to add, it says the scenery is already in use.

Cheers

Craig

Thanks for your response Rick. Sorry but what is AIO Manager?

Cheers Craig

Hi All

I am using the latest Prepar3d 4.5 software and I have added BDO's Kansai (RJBB). When I look at the scenery library I cannot see the scenery listed bit when I go to add, a dialogue box opens and states that the scenery is already in the scenery library. The problem also is that the scenery that loads is the default. Any ideas?

Thanks

Craig

Thanks Urmel, I have asked again in the AIG forum.

Cheers

Craig

Thanks all for you assistance. 

The values you provided Dave has the aircraft blasting out of the ground like they are missiles, so they don't work with my system. 

I have reverted back to the previous settings and I will let them float. Appears to be something in my setup and since it is only one aircraft type, I won't worry about it for now.

Thanks again all for your time and assistance.

Cheers

Craig

Hi All

Happens at all airports where I know F100 and F70 fly from. They are the only AI models floating, the others are fine

Regards

Craig

Thanks Oliver. I have made changes to the contact point 3 and static_cg_height and it has made no difference. The AI model is the AIA F70 and F100 updated with PBR and Non-PBR models from AIG

Regards

Craig

Hi All

The F70 and F100 AI aircraft float above the tarmac compared to the other aircraft which don't. Can anyone advise how to resolve this please?

Cheers

Craig

Hi

Version 4.5

cheers

craig

Hi All

I have a problem where Prepar3D crashes when approaching New York or on the ground. This has happens with both FS Dreamteam KJFK v2 and the Drzewiecki Design scenery add ons. I have no problem anywhere else. Any suggestions as to what could be causing the problem?

Thanks

Cheers Craig

For me, civil and military

Civil:

B707

B727-100/200

B737-200/300/400/500/700/800

B747-200/300/400

B757-200

B767-200/300

B777-200

A300

A319

A320

A321

A332-200/300

A380

DC9

DC10

L-1011

MD80

F27

F50

F28

Emb 120

Emb 190

Gulfstream 2

Learjet 35

Twin Otter

Nomad 22

BAC 1-11

DH8-200/300/400

ATR42

ATR72

JS31

Shorts 360

SF340

SF2000

BAE146

SW3

SW4

C182

C172

PA28

M20C

BE55

BE58

C414

Military:

F18

Mir 3

A4

C130-E/H

CC08

P3

HS748

CH47

B206

MB326

UH1H

CT4B

I think that's it

Craig

737_800 I think the warning for flaps and trim are based on values on the FMC. Did you enter any details into the FMC before your test?

Craig

I get the same announcement occasionally with the PMDG NGX and just ignore it.

Cheers

Craig

I had this problem when I first installed it. You need to have the scenery density slider at dense or better from memory.

Rgds

Craig

The Second looks like Stavanger

Craig

Hi folks,

 

I don't know if theories are appreciated here anyway, but after over a week of speculation and still not a trace, here is my own theory:

 

Sorry but I think this is nonesense. If it was true there would be lots of floating wreckage or if over land fire.

In a no radar environment and with IMC the cutoff distance for dep maybe 3nm so a 4nm call will help the tower controller decide whether to depart an aircraft or not

109.9 in Nav 1 113.0 in Nav 2.

Because there isn't a DME with the ILS the dist wont be displayed on the PFD, make sure you switch VOR 1 and 2 on on  the glare shield panel and dist will be displayed on the ND on the bottom right

SR71

Civil; C152, C172, C182, PA28, PA28R, BE76, BE55, BE58, AC14, Decathlon, N22B, SW3, SW4, BE80, B707-300, B727-100, B727-200, B737-200, B737-300, B737-400, B737-500, B737-800, B747-200, B747-300, B747-400, B757-200, B767-200, B767-300, B777-200, A300, A319, A320, A321, A330-200, A330-300, A380, DC9, MD80, DC10, L1011, F27, F50, F28, LR31, GLF2, AT42, AT72, DH8B, DH8D,SF34, SF20, BA46, C414, PA31, M20J, DHC6, JS31

MIL: CT4B, MB32, F18, A4, C130E, C130H, DHC4, CH47, UH1B UH1H, B206, HS748, P3, BA11, MIR3,

Flown: C152, C172, PA28, PA28R, BE76, BE58, AC14, Decathlon, CT4B, MB32, F18, A4, MIR3, DHC4