kaloska

Hello

I have several issue with ATSim  An-2. In raining weather my frame rate was really terrible compare to other planes with  the some A2A window rain effect, and the rain effect did not stop if the rain did stop. If I changed plane, the effect remains too on the new plane windshield ! I had to start again the simulator for clean windows. This was in Win7. The landing light effect was too strong and unrealistic. I wrote this to the contact email address several weeks ago but the developers not responded to me ! I think  they don't react to anyone. Several days ago a installed a new fresh Win10 and P4D v4.5HF to my system, and the plane not working properly. I installed it without problem but it has not vc cockpit textures if I select this plane firstly after the game loaded, and in the external view a large black square visible between the upper and lower wings. If I loaded this plane after another plane, the vc cockpit appeared for a short time and then disappeared. The black wing textures remained too. I switched off Windows antivirus during installation and during playing without result. I installed it several times but I gave up. Other planes  working without problems. 

Sorry for my bad english

4 hours ago, Bert Pieke said:

What happens if you reduce global texture size to 1024 or 2048?

Hi Bert

Better with those settings, but the internal engine sound lag terrible and it's useless to me. The VRAM load goes back to 3-4 GB, frame rate was acceptable now, but the sound issue is there. I've tried everything already (motherboard sound driver reinstall, sound quality settings back to 16bit/44000Hz CD, and Nvidia HD audio disabling, Latency check).  The engine/prop sound goes up and down very slow and laggy, compare to the external sound. And every change on the G1000 screens, while reloaded the data, cause framerate drops and sound lags. Every other addon works good (PMDG NGX, F1 B200, Majestic Q400, A2A, F1GTN). My system is poor for this addon I think. I was not patient enough with this purchase. I don't want purchase any hardware for my aged system, and my video card only 5 months old, because the preious card ruined. A complete new system too much for me now. Uninstalled again 😞

Hi Lenny777 !

I have the some VRAM and performance problem too. I have only 4GB Nvidia Gf 1050Ti card (and an old i5 750/3500 MHz 8Gb/1600MHz  RAM system), and this plane unusable for me at this time and uninstalled now. This plane perform worse from my addons. Worse then F1 B200 ( Surprisingly), Majestic Q400,and PMDG737NG which I can use without big problem with my outdated system with internal locked 20Fps. My GPU load 100% with this addon and I have a lot of microstutters, and with my F1 B200 with similar G1000 I have only 25-30% VRAM load. Reduced all sliders a lot but it's not helped too. Internal sound is gradually changing (Steep with 1%) with the engine speed changes and not continuously fluid as in the external sound. Updated the GPU drivers too. I'm very disappointed because I didn't read minimal system requirement before  I bought it because the AVSIM  Membership reported good performane with this nice addon. I have fresh P3D v4.4 and with only several planes installed now, no OrbX or other framerate killer apps installed so far.

Sorry for my bad english, not my native language .

Or use this free software to make thumbnail:

http://library.avsim.net/search.php?SearchTerm=Autothumbnail&CatID=root&Go=Search

Thanks for the quotes, I will try the demo I think.

Hi Folks ,

I'm thinking about the purchase of  Flight1 GTN 750 for FSX.

My config: i5-750/3.3GHz(OC), 4Gb 1333MHz RAM, AMD 4980/1Gb Graphic card.

Will there be enough power for this software ?

I read that the requirement is 8Gb Ram, but I don't want to buy any new hardware now.

Thanx

Thanks

Hi

I like to ask folks, what news in the v1.4 version compared to the v1.3 ?  New features or only reduced bugs ?

thx

Hi !

I tried this trick, but regularly saw the runway lights through the mountains, especially at night. It took some time before I realized the cause of visual defect. I restored the original config, and the error was gone

Hi Folks !

Is it possible to write out to the screen the current seat / eyepoint "XYZ" positions-coordinates, like the zoom factor ?

What must be write to the fsx config ? How can I do that ?

Thank You !

Thanks Craig!

Hi !

First thank You for the work.

I like to ask, that It is necessary for me to install Bert's last Mods, or just enough to install this ?

And, if necessary, in what order ?

Thank You !

Hi Bert !

Please send me Your last updates to zkalos@t-online.hu

Thank You very much !

 

Here it is,

 

 

The real one looks like this... (from another point of view)

 

 

The scenery for the raw material dock is at the front of this picture before the river estuary. The building at the back are from another scenery by fellow developpers (Quebec downtown).

 

Most of the building, tanks, ships, crane, objects and trees in the harbour scene are from the standard FSX/P3D scenery put there with instant scenery. I made a photoscenery to replace the standard FSX ground tiles and 3 custom objects ; the dock itself, and the two dome (Rio tinto aluminium and Xstrata nickel). The custom objet are also positionned with instant scenery.

Very nice work !

And how can I put a photo scenery layer ? What is the process order and

I hope may be help for checking it, if You have not already read it.:

http://forum.avsim.net/topic/449198-objective-vas-analysis-a-lua-script-to-assist-with-ooms/

STANS !

How can I switch off the moving jetways ?

Why we must use SceneryConfigEditor software ? If I untick in the FSX Scenery Library those sceneries what I not use for next flight, is not that enough?

The xrpm3. isn't in the sound.cfg, therefore why this fixing this problem ?

Hi Bob !

Try set the throttle lever to 0% and not the Beta or revenge range before stop the engine. I have this problem with other planes ,not this one(not my own this planes) , but I hope this help.

Cheers!

Thank You !

And will for the Duke B60 ? Similar panel to Turbine Duke.

I have done the conversion of my "Scenery\World\Texture" folder with mipmap and without mipmap and modified my "terrain.cfg" too (changed all "bmp" extensions to "dds") with "replace" function.

-With mipmap I had several "Unknown error" message towards the end of coversion process. The texture size changed from 682.7kb. to 1.3MB.

The sim was unusable ! Corrupt, recurrent, deficient textures, and mixed water textures everywhere !

-Without mipmap I had a lot of "Unknown error" message during coversion process ! The texture size changed from 682.7kb. to 1MB.

The sim was unusable ! Corrupt, recurrent, deficient textures, and mixed water textures everywhere too !

And finaly I don't understand, why the compressed "dxt5" file size bigger than the uncompressed "bmp" file size ! Esspecially without mipmaps.

This was a time-consuming and inefficient test to me :(

I have done the conversion of "Texture" and "Effect\texture" folder, tested it and I did not see difference in smoothness and performance. Others experience?

I must be convert with or without mipmap ?

Thanks Pieke !

The problem happen with limiter too.

Ramdisk not enough good to me, because I have only 4GB ram, and Ramdisk can create only 4GB too for me (limited in system ram size), and Mytraffic aircraft folder 10GB.