Jump to content

danbaz

Members
  • Content Count

    68
  • Donations

    $0.00 
  • Joined

  • Last visited

Everything posted by danbaz

  1. Regarding this challenge/response request I will write up the exact wording I would like and will get back with specifics asks. Regarding my other requests in the other thread, pls can you fix the broken links, e.g. yellow hydraulic pump etc. Also in that thread were some requests regarding actions that FO should do stuff based on things he knows our can be told earlier. Would like to hear what is possible. Lastly and unrelated to anything asked so far, I am very curious to hear what the roadmap is for MCE for 2022. Any development plans? 😊 Have a great day Daniel
  2. Thanks for your comments David, I have as I have done a tiny bit of programming (VBA). Just enough to be dangerous probably! My goal is to capture bits and pieces of the dialogue that would happen between a Cap and his FO, outside of the checklists. I used the altimeter, but perhaps better would have used the constraints setting as it is not directly part of a checklist. No, as that would be proper check list handling. I am trying to capture the cockpit preparation phase which in A320 they aparently do together for the most part (except overhead and MCDU). We can program a lot of dialogue with many little vox scripts, but that gets tedious and he cannot speak variables as he does not know them, hence the ask for some challenge/response functionality, but outside running the checklist. Inside vox script would be great. With the _ functionality I even would not have to remember an exact phrase Gerald would have to tell us. I believe a whole lot of the FBW can be read. They probably do break some stuff sometimes too. What I am asking for is perhaps MCE 2.0 🙂 I agree, when everything is working, MCE is the best you can get now except from having somebody sitting next to you. Regards, Daniel
  3. Hi David, Always welcome to join in with your views and experience! The biggest I have flown is a Metroliner - 20 years ago. Not in aviation anymore, but an enthusiast. What I am trying to do is to get as close as possible to real world operations. Flows and Checklists are the cornerstone of what happens in the cockpit, but there is also dialogue with variables spoken back by the FO. In my studying of the A320 flows I have seen that a big part of the cokcpit preparation scan the PF does is done when both pilots are seated, they then do the glareshield scan together and set it up, so later when doing the checklist they can confirm 'completed'. This is not silent, they talk to each other (I assume, so correct me if this is wrong). This part is not what MCE is designed for, but when able I would like to include a lot of it if possible. One way to be able to do this is to be able to add some challenge response type of dialogue in a voxscript and the PF should be the one that speaks the challenges. To program this you could add - above requested - options that can be set per checklist (like we have for voxscript) or add some functionality in voxscript itself. We have Notify/Pause/Sound commands, so a challenge/respond command should perhaps be doable too. (?) Just thinking out loud here! Example for when they discuss the altimeter setting, the voxscript item could be: [PF]=_ setting left -- _ setting right [PF]= indicates challenge response type where PF speaks the challenge _ setting left --> per regular checklist functionality _ setting right --> per regular checklist functionality, but FO will speak "right" This means the voxscript is halted until the PF has spoken "setting left" The next item in the flow could be the voxkey item where FO presses B to set his altimeter (I know currently both alitimeters are linked, but asume at some point this will be fixed) I hope the above makes a bit more clear what I am looking for. 🙂 Kind regards, Daniel
  4. one more... I know request the request for a non voice initiated flow has been made before, but please allow me to try again. As you know the after start flow starts when the captain sets the mode selector to normal. We do not want the flow to start mid air, so perhaps when combined with the FMGC in preflight phase this could work?
  5. Good evening, FO has a silent before start flow. Part of the flow is to close his window. Part of his default action for this is to counter and tell me to close my window too. I tried several variants, all with the same result. Is there a similar command that will allow him to silently close his window without telling me what to do? Talks a lot, Enable nagging and Can hear minor insults have been deselected. Part of his after start flow is to set flaps for takeoff. Can he read the correct setting from the MCDU? or can I tell him - as part of the briefing - what the flap setting will be, so that he knows what to set them to? And as we are on it, he also needs to set the trim to the takeoff position. Same questions apply as for the flaps. He accepts "reset elevator trim", but he says he will set them to neutral and will not do anything. Either way, I need him to set them to the takeoff position. Kind regards, Daniel
  6. Thank you Gerald, Another thing that I have learned by crawling the forum is that with the "_ set" combined with the "//3" instruction, the FO will repeat the whole thing as if he was checking it himself. So if I say "three zero zero zero set", he will repeat "three zero zero zero set". Very cool! Is there an option to run a checklist, but prevent that FO starts with saying e.g. "Glareshield checklist" and that he does not end the checklist with saying "Glareshield checklist completed"? I triggered this checklist from a silent flow. Is there also an option that at the end of the checklist he continues where he was in that flow? I know that I could put a Pause=x statement in the flow, which would probably work, but better would be if he could go back to the flow at the end or if I could add a go to x flow statement (thus breaking the flow in multipe parts). Basically what I am trying to do is to setup a whole procedure where flow items and unofficial checklist items follow one another in one big event. When watched on Youtube the viewer would not notice breaks between flow items and such checklist items, but see it as one big conversation where certain items are checked by both. I hope with this you know what I am trying to do. Kind regards, Daniel
  7. Hi Gerald, All, Regarding checklist options. As documents are not including all the advanced options and searching/finding on AVSIM is difficult, pls can you summarize these for me? I have done my homework and found the //1 - //7 to determine who responds. <-- (documented in How to create custom checklist.rtf) Also found the single underscore "_ set" -> speak what you want --> "2992 set" I think I have found that all text within () is omitted --> is that correct? What about if you use double underscore or even tripple ( as found in TFDi_B717_Check.txt)? We do not know what we do not know.. What other gold pieces you have to add to the list? Looking forward to hear from you (all).
  8. I have had issue with this too in past. Try to say "oto" instead of "auwto" (like I am used to in Dutch).
  9. Thank you Gerald, 1. Telling him is easier than doing the simbrief .pln export + MCE import (which seems to work partially). 2. OK 3. Opinions can vary, but I would opt to allow MCE to handle ground services, but only on request. This allows for flexibility. I could ask for the ramp through the Toolbar Pushback app, but could ask FO to call for the fuel truck. This way having best of both worlds. PS. Have you been able to check FO ability to switch off/on the yellow electrical pump (and dome light) yet? FBW always starts up with this being below the green band, hence FO task to engage the pump for a few seconds to fix. FBW will be adding chocks soon, so then he can also do the first flight of day alternate braking system check. Well I tried, but he will not touch the brakes, so guess that one is out of scope for now.
  10. Good afternoon, 1. The FBW mod can take the flightplan directly from the MCDU, bypassing MSFS flightplanning, but still providing MSFS ATC services (IFR Clearance). Of course MCE does not know this and states so in the gui ATC tab. How important is it for MCE to have the flightplan loaded? From Simbrief I have downloaded the MSFS plan and have imported in MCE. Is this the recommended way now? 2. In the MCE gui, ATC tab, there is an option: Use <DEL> or <END>key for transn I cannot deselect this option. Problem: I use the END key a lot as it is the default for switching from inside the cockpit to outside the airplane. Why does it not accept to clear the check box? 3. While spawning at EHRD Gate 2C and loading MCE, the FO is asking ATC to send the ramp. How can I turn this off? The reason is that I am using another add-on to have the ramp in place and through that one it will stay in place until I ask for it to be removed. Looking forward to hear from you. Daniel
  11. Good day! Holiday has finally arrived, so back to flightsimming. Few questions re power up flow: The Available_Commands.dat file: Pls can you sort it? I have done it for myself, but next time when I install a new version it will overwrite (probably).. 'weather radar gcs set to auto' and 'weather radar gcs switch off' both have verbal confirmation, but do not actually do anything. 'weather radar to turbulence' is setting the mode selector to wx + t (FO response is "weather radar weather and air"). The FO also switches on the weather radar. Which command shall I use to only have him switch the mode selector to a certain option, but the leave the system on/off as it is? ignition mode set to nomal: Pls can you add the r in normal in the Available_Commands.dat file? FO should check engine master 1 and 2 are both off. Which command to use for that? 'shutdown engine one' could work, but he ask me if I am feeling well and does not switch off the master switch. Looking for something like "check engine master switch one is off" I know the FO cannot do the lights yet. Does this include the Dome light switch or should that one work? When on bright/dim and I ask him to switch it off he says it is off already. When I ask him to switch to dim, he says he will, but he does not do anything. When I ask him to switch to bright, he does not know what I am asking. The below has been added a bit later.. 'hydraulic electrical pump yellow on' Command is accepted but the pump is not switched. He also does not switch it off when asked. Kind regards, Daniel
  12. Thanks Bryan, So if I do not use the pre flight events 30 minute scenario, but wish to take some more time and as the manual flow selector is for testing/emergency, then I think I have missed something somewhere on how to get the FO to start the Preliminary Cockpit Flow. What is the intended process for this? Sorry for ignorance.
  13. Hi Bryan, Is there a voice command to have the FO execute the flows in Manual Flow / Command Selector? I tried the preliminary cockpit setup one and it did not work. Was also difficult to find info on it. If not, pls can you consider adding and also consider adding some notes on that, so that voice users know there is no need to try? Kind regards, Daniel
  14. I had to copy the patch link and manually paste it on a new tab, but then it worked.. Thanks!
  15. Thanks Gerald, 2.9.4.1 installed and that worked. The patch above did not download, but assume that is included now.
  16. Good afternoon! Just noticed on YouTube that competitors FO is able to turn on the batteries. Does this mean that MCE FO will be able to do this as well shortly? 😎
  17. Good afternoon, On your website, downloads page, Aerosoft CRJ link in sentence 'Now fully integrated with FlyByWire A320 mod and Aerosoft CRJ for MSFS' actually links to FBW. FBW A32NX is a separate plane in MSFS now. Will you continue to support it in the MCE Light version or will it shift to Ultimate version only? Noticed a new version is live (V2.9.2.0.). Thank you! Does this replace all patches issued recently? Do you issue a change log somewhere? Kind regards, Daniel
  18. Thanks Gerald, For the set speed, heading altitude etc. I probably should have said that I know that all works with speech, but I am looking to know if they could be triggered as part of a script. Not saying I have a need for that now though. I am still on stable. What I am doing is building a spreadsheet with columns for panel, a command for each switch/button/what you have that would be usable in a script, the result for stable version and when that is ready, accurate and working, then add a column with results in developmental version. If you have this already, then pls can you share as I'd rather spent my time differently, on the next phase, building the scripts to my liking. Why am I doing the sheet? Because when I start to work on scripts, I want to be able to use a database and quickly copy/paste what I need knowing that it works or knowing it does not work and is not planned, rather than trial and error at that time to get it to work. That is just me. 😎 Kind regards, Daniel
  19. Hi Gerald, In airbus arrow up/down is used to scroll through a list. I have set to 'not planned'. Thanks for the hints on the three others. Yesterday and today I did some checks on some other panels. As an update is expected soon, the things I found will have been discovered by yourselfs too, but just in case, I will list them here anyway: Kind regards, Daniel Panel Commands Result glareshield first officer efis control panel push your altimeter for qnh not simulated glareshield first officer efis control panel your altimeter to qfe not simulated glareshield first officer efis control panel your altimeter to current applicable could be custom press B on keyboard glareshield first officer efis control panel push your altimeter knob not simulated glareshield first officer efis control panel right alimeter set three zero zero zero not simulated glareshield first officer efis control panel your efis show constraints Accepted, but done on captains side glareshield first officer efis control panel your efis hide constraints Accepted, but does not do anything glareshield first officer efis control panel your efis show vor Accepted, but done on captains side glareshield first officer efis control panel your efis hide vor Accepted, but does not do anything glareshield first officer efis control panel your efis show waypoints Accepted, but done on captains side glareshield first officer efis control panel your efis hide waypoints Accepted, but does not do anything glareshield first officer efis control panel your efis show ndb Accepted, but done on captains side glareshield first officer efis control panel your efis hide ndb Accepted, but does not do anything glareshield first officer efis control panel your efis show airports Accepted, but done on captains side glareshield first officer efis control panel your efis hide airports Accepted, but does not do anything glareshield first officer efis control panel your nd mode to arc Says set to map; sets to VOR glareshield first officer efis control panel your nd mode to plan Says set to plan; sets to VOR glareshield first officer master warning clear your master warning not simulated glareshield first officer master caution clear your master caution not simulated glareshield first officer chronometer start your chronometer not planned glareshield first officer chronometer stop your chronometer not planned glareshield first officer chronometer reset your chronometer not planned glareshield flight control unit panel switch to mach not simulated glareshield flight control unit panel switch to speed not simulated glareshield flight control unit panel set speed two five zero not simulated glareshield flight control unit panel set heading zero niner zero not simulated glareshield flight control unit panel localizer mode on Accepted, but does not do anything glareshield flight control unit panel localizer mode off Accepted, but does not do anything glareshield flight control unit panel select heading vertical speed does not recognize it is in trk/fpa mode glareshield flight control unit panel press track f p a Accepted, but does not do anything glareshield flight control unit panel set altitude selection increments to hundreds not simulated glareshield flight control unit panel set altitude selection increments to thousands not simulated glareshield flight control unit panel pull altitude knob Accepted, but does not do anything glareshield flight control unit panel display metric altitude on nd not simulated glareshield flight control unit panel hide metric altitude on nd not simulated glareshield flight control unit panel set vertical speed six hundred not simulated glareshield flight control unit panel approach mode on OK - but light in button remained off.. glareshield flight control unit panel approach mode off OK - but light in button remained on..
  20. Noticed something today which I noticed earlier too. When I load the flight and have it sit for quite a long time before I start MCE, MCE will not initialize correctly, the log states not all Hvars are accounted for. When I close MCE and restart MCE, then it states that all Hvars are accounted for. Any idea what causes this to happen? Small observation about Dieter introducing himself. He alwas (perhaps not always) says his name twice.
×
×
  • Create New...