muffo

Negative, there are, on real two airports with the same icao, one is Penglai ( civil airport), other is Laishan ( military airport)

Today I tried to do a flight between zswx and zsyt on China, but in lnm zsyt is red. I controlled, but the airport existes on msfs2020, and using airport design editor, the airport is complete, why?

https://drive.google.com/file/d/1RkYiwEY7TDhzYdSPkfiIvIDFcuYjy-I-/view?usp=sharing

yes Manuel the airplane must have two engines on, becuase it has only ground power. The automatic checklist write that you must  have two engines on, before you  connect the tug.

Hi Manuel, Justflight made this airplane. It is a supersonic airplanes and fly at 2.1 mach, cruise level 60.000 ft and in 4 hours you flight from egll to kjfk.

will fs2crew pushback be modified to make it compatible with Concorde? Now it cannot be used because the plane must have two engines running, as it does not have the APU.

I have problem today with open street map, and the new maps recommended by Alex: osm-de, osme-fr and osm-tf outdoors. All with the same problem. See the photo below

no problem with other themes. How I can solve this?

Hi Alex I noticed, on my case, that after five hours, Little nav map freezes and it is impossible  to reactivate it until I reload msfs2020 again. I think that is simcconect problem. this happen with the same airplane, pmdg dc6. How I can solve the problem? 

Lnm version: 2.6.16

Msfs2020: 1.19.9.0

HI to all, i used this airplane many times with a lot of fun in several simulators. Now i tried, many times, to use it on prepar3d v.4 but I have CTD wit kernelbase.dll error:

Nome dell'applicazione che ha generato l'errore: Prepar3D.exe, versione: 4.5.11.29713, timestamp: 0x5ca56c53
Nome del modulo che ha generato l'errore: KERNELBASE.dll, versione: 10.0.17763.475, timestamp: 0x69a188f0
Codice eccezione: 0xc0020001
Offset errore 0x0000000000039129
ID processo che ha generato l'errore: 0x196c
Ora di avvio dell'applicazione che ha generato l'errore: 0x01d52bdcfacc17d8
Percorso dell'applicazione che ha generato l'errore: C:\Lockheed Martin\Prepar3D v4\Prepar3D.exe
Percorso del modulo che ha generato l'errore: C:\WINDOWS\System32\KERNELBASE.dll
ID segnalazione: c1197622-2e06-425b-b4cb-a9889d45d59e
Nome completo pacchetto che ha generato l'errore: 
ID applicazione relativo al pacchetto che ha generato l'errore: 

I unistall and reinstall the airplane but the problem is the same....How can I solve the problem?

Prepar3d 4.5

Windows 10 Home 

Found, thanks.

Hi,Does anyone know how to change the DH ? I didn't find anything about this.

I thing that it is impossible...but if you try to regulate the barometric alitudine, using baro setting, it appears the written on Inches and milibar

this morning, landing at Tampa, I had the same problem and the plane left for its business. I had forgotten to change the gps in nav, but having enabled a button in the simulator I changed and realigned the plane to the loc landed without problems ..... given that the problem is common we find a permanent solution. For my needs I have solved this way, but maybe for others the problem is not there.

I said that badly. Load a default aircraft, verify that it is in nav mode and not gps, load the maddog.

I had the same problem, and I discovered that the problem is nav\gps switch, you check this, before use the airplane.

Hi Gabriellc, your problem happens because the airport location is wrong. I built for my personal use (  IVAO world  tour 2018), a new scenery with correct location. If you want, I can send you my little airport. What Simulator are you using?

Hi downscc and thanks for your fast answer. It is the first thing I thought, but I didn't find it on fmc. I will try it better

regards

Andrea Deplano

Today I made a flight with 737-600 and I seen  that the captain's primary flight display zoom view doesn't work. With the other windows, I don't have this problem. Do I have to reinstall the plane? 

windows 7 64 bit premium

prepar 3d 4 

Andrea Deplano

I seen it...I bought this airplane on Carenado webside, and I don't understand why Carenado didn't send me the update's notice  as other airplanes that I bought there.

Hi Dan and thanks for your fast answer. Strange thing that the problem is only from 4 to 8 camera definitions. I will compare your file with my file. Thanks yet for your help. 

Since Prepar 3d 3 ( now I use the fourth release) I receive this advise from simulator:

"Camera definitions need to have a valid category ( File--camera:\C:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado Aero_Commander_500S\aircraft--CameraDefintion.XXX).....

what does it mean? How can I solve it?

I give to his family my deepest condolences,and important member of this company has been lost.RIP Tom.

Andrea Deplano

pdfkneeboard: you can see Charts on pdf format into simulator:

pdfkneeboard.dll ( version for fsx) add to folder modules pdfkneeboard.dll and pdfkneeboard,ini,add to  dll.xml:

<Launch.Addon>
    <Name>PDFKneeboard</Name>
    <Disabled>False</Disabled>
    <Path>.\modules\pdfkneeboard.dll</Path>
    <Commandline />
  </Launch.Addon>