russgreen

Just wondering if you have an ETA for when this fix might be available. Many thanks

I'm noticing that "sim/cockpit2/radios/indicators/hsi_display_horizontal_pilot" is not staying in sync with "RXP/radios/indicators/hsi_display_horizontal_pilot". When the RXP dataref is at 0 the xplane ref is still at 1. This issue seems to manifest itself when the GTN CDI is set to GPS but with no flight plan in the GTN.

Yes sounds like this solves my issue and still support the type of integration you were going for.# Many thanks

Toggling the CDI source on the built in GNS doesn't change the DME. The DME still reads from the beacon tuned in the nav radio.

Well possibly. Depending on the aicraft. Take the default 172. If you're using the GTN as NAV/COM1 you'd want to connect to VOR1 wouldn't you? And if you had a DME radio on the panel set to remote to nav 1 it would continue to use the NAV station tuned on the GTN but if you override all the DME datarefs that breaks.

Why would the DME (say a Bendix King KN62 type unit) suddenly report distance to a GPS waypoint?

Toggling the CDI between GPS and VLOC seems to change the sim/cockpit/radios/nav1_dme_dist_m dataref making seperate DME radios display distance to next GPS waypoint and not the tuned station on GTN Nav frequency. This seems to be very odd behavior.

Does the addin support popping out to a different monitor like the stock GNS530/430?

I've used PB OK on the same PC as my xplane 10 installed on a second monitor. Today I tried in on a second PC instead. Both machines connected to a gig ethernet. Panel builder is VERY sticky and slow to update making it totally unusable. I've tried project magenta IFR panel demo (arguably more graphic intensive so I'd expect to to be slower) and it is beautifully smooth. I'm using 2.95 and made sure the LAN is top of list as shown in the FAQ. What can I do to try and speed up panel builder?