xanox

Resolved by following the above. Thanks to all for assistance.

Apologies for the delayed response, as I have mainly been at work and not had chance to get back on to this issue. Still have the same issue. However, I have today realised that the comms section of my panel work fine. The EFIS and MCP work in reverse. I.E. when I update the heading on my simulator with the mouse, my panel is updated, but when updating my panel, the simulator is not updated.

the link you sent is where i downloaded from. Interestingly, the error also shows up on the 747 module - but that works fine

Just tried installing the PMDG747 module and that worked instantly. So my problems all centre around the PMDG 737 module.

Tried the reinstall and registration of FSUIPC and did not fix the issue. However, looking at the readme.txt file of the PMDG module i see this error. Syntax error! Line 2 '=' expected near 'Module' Line 2 LINDA module is highlighted in red.

Thank you. All looks ok to me. Im about to uninstall FSUIPC and reinstall as originally I installed an older version and updated to latest version. Then transferred registration. Im doing a clean install and will register new one directly.

Thank you for referring the article. I had already seen this and unfortunately haven't been able to resolve my issue. I'm at a complete loss and been trying for over a week now to get this sorted. LINDA has worked extremely well for me in the past and proved to be very stable and reliable. "Check the selected aircraft module, when the ngx is selected, that the folder is named PMDG737NGX" In reference to your suggestion above re: folder names - should I remove any spaces in folder name?

Yes all up to date and registered

I started afresh by installing latest LINDA and latest module for PMDG 737. All indicators in LINDA show green and MCP panel loads and indicates Ready! But no connection

Hi All Ive been running Prepar3d v 4.5.12 with LINDA successfully in the past, prior to a complete reinstall of Windows 10. I have recently installed LINDA version 3.0.12.810 and PMDG 737 module version 4.12. I cannot get them to connect. FSX Default works fine. [MAIN] LINDA Version 3.0.12.810 initialising (@1908021611) ... [MAIN] LINDA can start ... [MAIN] Opening Main form [MAIN] LINDA 3.0.12.810 GUI starting... [MAIN] LINDA 3.0.12 and P3D 64-bit running... [MAIN] Fonts added [MAIN] News added [MAIN] HID OnArrival [068E00F1] [MAIN] HID OnArrival [187C0517] [MAIN] HID OnArrival [046D0A0C] [MAIN] HID OnArrival [06A30763] [MAIN] HID OnArrival [187C0513] [MAIN] HID OnArrival [187C0516] [MAIN] HID OnArrival [187C0516] [MAIN] HID OnArrival [04170130] [MAIN] HID OnArrival [187C0516] [MAIN] HID OnArrival [187C0516] [MAIN] HID OnArrival [413C3016] [MAIN] HID OnArrival [187C0517] [MAIN] HID OnArrival [187C0517] [MAIN] HID OnDeviceChange - device added [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [068E00F1/0] [MAIN] >>>HID IsJoystick test = 28E2B50 [068E00F1] = Joystick [MAIN] >>>Joystick Found [068E00F1] [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0517/0] [MAIN] >>>HID IsJoystick test = 28E2D90 [187C0517] = Keyboard [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [046D0A0C/0] [MAIN] >>>HID IsJoystick test = 28E2E50 [046D0A0C] = 1 [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [06A30763/0] [MAIN] >>>HID IsJoystick test = 28E2F10 [06A30763] = Joystick [MAIN] >>>Joystick Found [06A30763] [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0513/0] [MAIN] >>>HID IsJoystick test = 28E3090 [187C0513] = 1 [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0516/0] [MAIN] >>>HID IsJoystick test = 28E3210 [187C0516] = Keypad [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0516/0] [MAIN] >>>HID IsJoystick test = 28E32D0 [187C0516] = 0 [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [04170130/0] [MAIN] >>>HID IsJoystick test = 28E3390 [04170130] = Joystick [MAIN] >>>Joystick Found [04170130] [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0516/0] [MAIN] >>>HID IsJoystick test = 28E3510 [187C0516] = 52 [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0516/0] [MAIN] >>>HID IsJoystick test = 28E35D0 [187C0516] = 52 [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [413C3016/0] [MAIN] >>>HID IsJoystick test = 28E3690 [413C3016] = Mouse [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0517/0] [MAIN] >>>HID IsJoystick test = 28E3750 [187C0517] = 1 [MAIN] >>>hidSysConfigLoad() complete [MAIN] hidEmunerateNodes [187C0517/0] [MAIN] >>>HID IsJoystick test = 28E3810 [187C0517] = 1 [MAIN] >>>hidConfigDftLoad - Unknown Device [] [MAIN] >>>hidConfigDftLoad complete [MAIN] >>>hidConfigReload unsuccessful [MAIN] >>>hidSysConfigLoad() complete [MAIN] >>>Restoring previous aircraft... [MAIN] LoadModuleInfo - folder = \ [MAIN] >>>Restore finished! [MAIN] Aircraft Selector initialized [MAIN] ConfigSysLoad() completed [DEFACFT= PMDG 737NGX] [MAIN] ConfigSysLoad() completed [DEFDEV=255] [MAIN] ConfigSysLoad() completed [FSXSYNC=1] [MAIN] ConfigSysLoad() completed [GLOBAL=0] [MAIN] ConfigSysLoad() completed [DEBUG=0] [MAIN] ConfigSysLoad() completed [SAITEK=0] [MAIN] [LINDA] Saitek Baro Reference set to 0 [MAIN] >>>btn 068E00F10-1=>>>0000000000000000000 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 1 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 2 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 3 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 4 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 5 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 6 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 7 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 8 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 9 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 10 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 11 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 12 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 13 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 14 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 15 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 16 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 17 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 18 2 [MAIN] >>>rl: 068E00F10-1=>>>0000000000000000000 bit 19 2 [MAIN] >>>ConfigSysSave() completed [MAIN] ConfigSysLoad() completed [BARO=0] [MAIN] ConfigSysLoad() completed [VAS=0] [MAIN] >>>ConfigSysSave() completed [MAIN] ConfigSysLoad() completed [RUNAWAY=1] [MAIN] >>>hidConfigDftLoad - Unknown Device [] [MAIN] >>>hidConfigDftLoad complete [MAIN] >>>hidConfigReload unsuccessful [MAIN] FSUIPC Ver = 5.152 [4208853004] [MAIN] >>>hidSysConfigLoad() complete [MAIN] >>>hidConfigDftLoad - Unknown Device [] [MAIN] >>>hidConfigDftLoad complete [MAIN] >>>hidConfigReload unsuccessful [MAIN] Restarting LUA Engine... [MAIN] LUA Engine Restarted... [MAIN] LINDA 3.0.12 GUI start completed ... [MAIN] FSUIPC ver 5.152 detected [MAIN] >>>hidConfigDftLoad - Unknown Device [] [MAIN] >>>hidConfigDftLoad complete [MAIN] >>>hidConfigReload unsuccessful [MAIN] >>>hidConfigCheck() complete [MAIN] FSUIPC Ver = 5.152 [4208853004] [MAIN] >>>hidSysConfigLoad() complete [MAIN] >>>hidConfigDftLoad - Unknown Device [] [MAIN] >>>hidConfigDftLoad complete [MAIN] >>>hidConfigLoad() complete [MAIN] >>>hidConfigReload successful [MAIN] >>>VRIConfigLoad completed 1 [MAIN] >>>VRIConfigSave completed [MAIN] >>>VRIConfigLoad completed 1 [MAIN] FSUIPC Ver = 5.152 [4208853004] [MAIN] LINDA GUI Main Timer started [MAIN] Opening Viewer form [MAIN] Opening Input form [MAIN] Opening Macros form [MAIN] Opening FSX Controls form [MAIN] Opening New Module form [MAIN] [TEST] Starting Add-ons Search [MAIN] [TEST] Addon Path (1) = C:\Users\geoff\AppData\Roaming\lockheed martin\prepar3D v4\add-ons.cfg [MAIN] [TEST] Valid Path Not Found (1) = C:\Users\geoff\AppData\Roaming\lockheed martin\prepar3D v4\add-ons.cfg [MAIN] [TEST] Addon Path (2) = C:\ProgramData\lockheed martin\prepar3D v4\add-ons.cfg [MAIN] [TEST] Valid Path Found (2) = C:\ProgramData\lockheed martin\prepar3D v4\add-ons.cfg [MAIN] [TEST] Processing Add-ons (2) = C:\ProgramData\lockheed martin\prepar3D v4\add-ons.cfg [MAIN] >>>[TEST] Read Line = >>><<< [MAIN] >>>[TEST] Read Line = >>>[Package.0]<<< [MAIN] [TEST] Package found (2) = PATH=C:\Users\geoff\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude [MAIN] [TEST] Package Dir Exists (2) = C:\Users\geoff\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\ [MAIN] [TEST] Processing XML Add-ons = C:\Users\geoff\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\add-on.xml [MAIN] [TEST] XML Add-ons complete = [MAIN] >>>[TEST] Read Line = >>>TITLE=FsDreamTeam Exclude<<< [MAIN] >>>[TEST] Read Line = >>>ACTIVE=true<<< [MAIN] >>>[TEST] Read Line = >>>REQUIRED=false<<< [MAIN] >>>[TEST] Read Line = >>>[Package.1]<<< [MAIN] [TEST] Package found (2) = PATH=C:\Users\geoff\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager [MAIN] [TEST] Package Dir Exists (2) = C:\Users\geoff\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\ [MAIN] [TEST] Processing XML Add-ons = C:\Users\geoff\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\add-on.xml [MAIN] >>>[TEST] XML Path Line = >>> <path>c:\program files (x86)\addon manager\simobjects\misc</path><<< [MAIN] >>>[TEST] XML Path Line = >>> <path>c:\program files (x86)\addon manager\simobjects\pbr</path><<< [MAIN] [TEST] XML Add-ons complete = c:\program files (x86)\addon manager\simobjects\pbr [MAIN] [TEST] XML result = C:\Users\geoff\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\c:\program files (x86)\addon manager\simobjects\pbr\ [MAIN] [TEST] Aircraft Dir processed (2) - 0 found [MAIN] >>>[TEST] Read Line = >>>TITLE=FsDreamTeam Addon Manager<<< [MAIN] >>>[TEST] Read Line = >>>ACTIVE=true<<< [MAIN] >>>[TEST] Read Line = >>>REQUIRED=false<<< [MAIN] >>>[TEST] Read Line = >>>[Package.2]<<< [MAIN] [TEST] Package found (2) = PATH=C:\Program Files (x86)\12bPilot\SODE\P3Dv4 [MAIN] [TEST] Package Dir Exists (2) = C:\Program Files (x86)\12bPilot\SODE\P3Dv4\ [MAIN] [TEST] Processing XML Add-ons = C:\Program Files (x86)\12bPilot\SODE\P3Dv4\add-on.xml [MAIN] >>>[TEST] XML Path Line = >>> <path>..\data\simobjects</path><<< [MAIN] >>>[TEST] XML Path Line = >>> <path>c:\programdata\12bpilot\sode\simobjects</path><<< [MAIN] [TEST] XML Add-ons complete = c:\programdata\12bpilot\sode\simobjects [MAIN] [TEST] XML result = C:\Program Files (x86)\12bPilot\SODE\P3Dv4\c:\programdata\12bpilot\sode\simobjects\ [MAIN] [TEST] Aircraft Dir processed (2) - 0 found [MAIN] >>>[TEST] Read Line = >>>TITLE=SODE<<< [MAIN] >>>[TEST] Read Line = >>>ACTIVE=true<<< [MAIN] >>>[TEST] Read Line = >>>REQUIRED=false<<< [MAIN] >>>[TEST] Read Line = >>><<< [MAIN] [TEST] Addon Path (3) = C:\Users\geoff\AppData\Local\lockheed martin\prepar3D v4\add-ons.cfg [MAIN] [TEST] Valid Path Not Found (3) = C:\Users\geoff\AppData\Local\lockheed martin\prepar3D v4\add-ons.cfg [MAIN] [TEST] Add-ons Search completed [MAIN] Opening Editor form [MAIN] All Forms opened successfully [MAIN] Opening Console form [MAIN] LINDA application all set to run [MAIN] Splash Screen = true [MAIN] ConfigSysLoad() completed [DEFACFT= * FSX Default] [MAIN] ConfigSysLoad() completed [DEFDEV=255] [MAIN] ConfigSysLoad() completed [FSXSYNC=1] [MAIN] ConfigSysLoad() completed [GLOBAL=0] [MAIN] ConfigSysLoad() completed [DEBUG=0] [MAIN] ConfigSysLoad() completed [SAITEK=0] [MAIN] ConfigSysLoad() completed [BARO=0] [MAIN] ConfigSysLoad() completed [VAS=0] [MAIN] ConfigSysLoad() completed [RUNAWAY=1] [MAIN] HIDSwitchDevice 1 [MAIN] FSUIPC Ver = 5.152 [4208853004] [MAIN] Console position data saved (formclose) [MAIN] Console data saved (deactivate) [MAIN] Console position data saved (formclose) [MAIN] Console data saved (deactivate) [MAIN] LINDA Shutting Down [MAIN] Fonts removed [MAIN] Closing Viewer form [MAIN] Closing Input form [MAIN] Closing FSX Controls form [MAIN] Closing Console form [MAIN] Console position data saved (formclose) [MAIN] Closing Macros form [MAIN] Closing New Module form [MAIN] Closing Editor form [MAIN] LINDA GUI Shutdown actions completed [MAIN] Terminating Application [MAIN] LINDA Terminated [MAIN] HIDDeviceUnplug detected [MAIN] HIDDeviceUnplug detected Any help would be appreciated. Thanks in advance