ayarov
-
Content Count
30 -
Donations
$0.00 -
Joined
-
Last visited
Posts posted by ayarov
-
-
I think it might be possible. I could imagine creating a custom command using FlyWithLua Script which incorporates two or more other commands. Then one could assign this custom command to a joystick button
-
-
Autopilot -> Toggle Autopilot VS Hold
- 1
-
Yea there is! Be sure to check out the unassigned portion of your keyboard configuration.
-
-
Hi guys,
I am also interested in the new Intel CPUs, currently I am running 2700K @ 5GHZ stable almost three months with temps below 75 at load. How could I meaningfully compare the new Intel CPUs to mine, or event better how could I compare a potentially OCed new Intel CPU to mine?
Regards,
ayarov
-
1 hour ago, boez said:Have you got the water detail slider set to Ultra? If so then this causes the GPU to drop out of its maximum performance mode...
Bingo!
I tried with "High" instead of "Ultra" and Memory Clock is back to 6000 Mhz. Power was already set to max. Thank you for the help guys!
-
Hey fellow simmers,
I am have recently got my hands on a EVGA 1080 SC GPU and have been testing it for a couple of days. I did a clean uninstall of the old drivers using the ddu tool and deleted my shaders before starting P3D. My GPU Memory clock is currently set to 6000 Mhz. I monitor it using the MSI Afterburner tool, and have also stressed it using the Heaven benchmark and other DX11 Heavy games, it stays frimly at 6000 Mhz under stress.
What surprised me is that just after P3D loads a scenario, the GPU Memory Frequency drops to 5500 Mhz, at the loading screen it shows 6000 Mhz. This puzzles me, and is the reason I turn to the community for useful hints. Looking forward to your suggestions.
P3D4.3
-
-
I have PALIT GTX670 2GB and had multiple driver crashes, rolled back to 398.36
-
3 hours ago, DAL213 said:Well folks.... i was one of the first ones to place a pre-order of 2 2080Ti (that was the max number per person). They should ship 9/20. Let me be a guinea pig and test these bad boys for you. If not, can alway sell them.
I own a lot of Nvidia stock so follow their announcements very closely. So this morning when i saw the pre order link in the site my finger clicked on the add to cart without actually consulting with my brain.
It happens!
nico
Didn’t you say in a twitch stream that you are not allowed to own any stock in any country due to your job? I am confused.
-
On 6/13/2018 at 9:03 AM, SteveW said:I use IFPro to ensure the flight is repeated exactly the same each time with AI traffic weather and so on. Using real time weather is no good it's got to be the same each time. I save a flight on AP about to make a turn onto final, something like that. I can make a config change and run the flight again and again. I run two to four minutes of flight and make graphs related to performance, fps and other data (30+ P3D items) recorded with IFPro during the flight. I usually make sure to repeat the same test three times each.
Hi Steve,
does IFPro support recording and replaying flights.
My understanding is that you do your flight once manually, for example a 5 min approach into a heavy scenery with some static weather. Then you use IFPro to repeat this whole exact scenario as you flew it without you touching any controls under different graphics or tweak settings. I know of no utility that can do that in p3d yet.
- 1
-
Agreed!
-
Cold War Tactics even in the Flight Sim Community, how sad...
- 3
-
Not completely accurate. There will be a (free) v1.4 update for XPv10 with many of the features and bug fixes discussed at X-Pilot. There will be a (free) v1.5 update to allow the v1.4 version to be compatible with XPv11. And... we will have a (paid) v2.0 of the Saab, which will be almost a completely new aircraft and will take advantage of all the features of XPv11. We expect pricing on v2.0 to provide consideration for those who had bought the Saab within a short time of the v2.0 release. We believe that these three update paths will fit the needs of the majority of our customers.
As was posted in the forums at X-Pilot, the v1.4 update will eliminate the non-standard axis assignments for the condition levers.
I apologise for the wrong information and stand corrected regarding v1.5! Thanks!
-
bear in mind it will be a paid update for XP11!
-
i turned of threaded optimization and went from 5-10 fps to over 20. thanks!
-
eject the x-plane 10 dvd before x-plane 11 beta to get the demo option!
-
I do not own orbx products, but have pretty descent payware sceneries like Münich, Kopenhagen and Wienna. I also fly the 777 between them regularly and have every slider in the scenery tab maxed. I also use AS2016 and fly on vatsim. HDR is on, shadows are off and all traffic is off. Screen Resolution is 1920x1200 and texture 2048x2048.
What I did in the beginning when I started flying the 777 is I turned off the external 3d model. I know it is a no go for a lot of simmers out there, but it is ok for me not to see the 3d model when simming. This apparently saves a couple of hundreds of VAS. Try turning off the ext 3d for the 777 and test your usual flight, hope that helps.
-
Thanks for your feedback,
sound like you are having fun with the DC6
Might I ask, do you also have the IXEG737 in x-plane?
I do not yet own the DC6 but so far my experience with the IXEG737 has been amazing. The immersion is way better than the FF 777/757/A350 and the JAR A320.
Regards,
Atanas Ayarov
-
i have more than doubled the speed of starting p3d by not running the sim as admin... as in (run as administrator option)
-
Do not forget to try the x-plane Demo, its free and the default scenery looks much better than fsx:
-
Just a wild guess: Spacebar
:wink:
-
whats does SimpleCam more than this freeware plugin?:
http://www.avsim.com/topic/478204-x-plane-like-easy-to-use-camera-plugin/
tbm900 hotstart or torquesim sr22?
in The X-Plane General Discussions Forum
Posted
The TBM can be up and running from cold and Dark within 5 min if you get used to it. Practice makes perfect 🙂