yvjjflores

Greetings to all and good health. Aircraft: QW B787 (all versions) I have noticed that when the autothrottler is deactivated during a final approach without an autopilot the engines rev up to the level where I applied the TOGA during takeoff. What causes an increase or decrease in the power of engines very different from what we are carrying. Have you noticed that, has it happened to you, any solution in this regard ???? Thanks and happy flight

https://fselite.net/news/captain-sim-releases-737-classic-for-p3d/ https://www.captainsim.com/store/

[19MAR21] A round of small updates for the 777 product line were just released via PMDG Operations Center Today, 00:09 Captains, A few moments ago we pushed a set of updates for the entire 777 P3D product line. This is another minor-cleanup and nuisance removal update that is available for you via the PMDG Operations Center micro-update process. To obtain the update, simply launch the PMDG Operations Center, click Aircraft and Liveries and then click Product Updates. From this page, you will be notified of an update for the entire range of 777 to bring them up to build 1.11.1201. The change list for this update cycle is pretty brief: PMDG 777 Full Product Line - 1.11.1201 - 19MAR21 ================================================== ======= 0009587: [General - Unsure] PVD Inop on both takeoff and landing and previous update 1.11.1183 (rsrandazzo) 0009582: [Main Panel - EICAS Messaging Issues] AUTOBRAKE advisory message intermittent on braking disconnect (rsrandazzo) 0009612: [AFDS - Thrust Modes] Protection against low speed climbs (emvaos) 0009605: [External Model - Geometry] 200ER Beacon no splash effect on Ground (jbrown) 0009604: [External Model - Geometry] 200ER TLA insufficient to reach m/switch for T/O thrust range system logic at deeply derated thrust or very high assumed temp. (rsrandazzo) 0009591: [Systems - Wheels & Brakes] Autobrake deceleration rates after 1183 update (rsrandazzo) 0009588: [FMS - Route/Legs Pages] CLB page TRANS ALT is affecting how the altitude will show in a STAR VECTORS segment instead of the Descent Forecast TL page (emvaos) 0009597: [EFB - Performance and Computational] 200ER : MTOW changes not being retained after sim reload and EFB MTOW in OPT TO (emvaos) 0009603: [External Model - Geometry] 777W incorrect nose gear contact position (jbrown) 0009581: [External Model - Geometry] Push Back tug is loading with front wheels turned to the left. (rsrandazzo) 0009594: [External Model - Liveries] American Alrlines N753AN livery Tail number issue (psterling) Over the next few weeks, we are going to be pushing updates to the 747 and 737 product lines in order to roll out updates for those product lines that have accumulated as a normal part of the product maintenance process, and other changes that resulted from discoveries we made during the 777 development cycle such as eliminating the "acceleration with excessive AOA" bug and those types of things. I don't have any schedule information for those changes largely because I don't want to hem myself into a schedule that we might/might not be able to make- so watch here and we will let you know as we roll them out! Thanks again for all of your support of the 777- we hope you have some fun flying planned for her this weekend! I'm going to grab some dinner and then I'll be back with some further updates on the Road Ahead! Robert S. Randazzo PMDG Simulations http://www.pmdg.com

I tested with PMDG NGXU and Default Aircraft and the same thing happened

Windows 10 Ver 2004 Prepar3d.cfg no deleted after install...

Hi.... Shader folder deleted. Windows 10 latest version. Amd Driver Latest version.

Hello friends. Today I have decided to update prepa3d from version 5.0 to 5.1 HF1. I updated the Client, Content and Scenery according to the LM indications. However, I have the problem that I cannot start any flight with EA activated, because the simulator closes without any warning. With EA off, no problem, everything works fine. If someone experienced this problem, they would be very grateful for help in this regard according to their experience. Thanks. Prepar3D.exe 5.1.12.26829 5fb44f72 g2d.dll 5.1.12.26829 5fb44ef5 c0000005 0000000000660bdd 17a0 01d6c1e3602f16df D:\Prepar3D v5\Prepar3D.exe D:\Prepar3D v5\g2d.dll c76eafce-3c67-44e5-be06-208bf2823975

Cheers... I do not usually update immediately after a patch or new version of the software is released, which I apply for the simulator. Reading about the P3D update, LM says "EA is now not a BETA", but since I haven't seen any screenshot of the interface updated to V5.1, I must ask: Is there an option to disable EA ???

I am using V5 with HF1 with no CTD issues so far. To prevent, I do not have the Truesky Beta activated and I only take advantage of an fps gain while solving the problems that we know exist.

Particularly I do many long haul flights in IVAO and VATSIM, the flight time is shared with work, since I do it from my home. Ivao or vatsim map monitoring on a monitor and cabin check constantly. Zero Stress. When they see SCV002 in IVAO and TCA7933 in Vatsim, there I go ... hahaha.

Well ... please tell us about your Flychrone experience later.. 😉

Hi... I use Fsx Real Time v 1.99 build 19531.5629 without problem.... Other option available is FlyCrhono (https://flyapps.weebly.com/flychrono.html). The latter I have not used yet, but I have read comments from other people who do use it without problems. Happy flight

Fixed Issues Radeon RX Vega series graphics products may experience a system hang or black screen when running Folding@Home while also running an application using hardware acceleration of video content. A system crash or hang may be experienced when using Edge browser to play Netflix™ content. XSplit™ may experience an application hang or freeze when performing a scene switch. Minor stuttering may occur when performing a task switch with performance metrics overlay open in some games. Overwatch™ may experience an intermittent crash while entering a game or during extended gameplay sessions. Radeon RX 5700 series graphics product system configurations may intermittently experience a display loss or black screen while gaming or on desktop with a limited number of displays. Radeon Software may experience an application crash when playing games with non-alphanumeric characters in the game title. Radeon RX Vega series graphics products may experience an application crash with Microsoft® Teams when hardware acceleration is enabled. An ‘Unable to get requirements’ error message may intermittently occur when viewing the Upgrade Advisor tab in Radeon Software. Radeon RX Vega series graphics products may experience a system crash or TDR when playing games with Instant Replay or Record Desktop enabled. Resolved an install issue where Error 1603 could occur when an installation prerequisite for Visual C++ was not correctly detected as installed. Known Issues Enhanced Sync may cause a black screen to occur when enabled on some games and system configurations. Any users who may be experiencing issues with Enhanced Sync enabled should disable it as a temporary workaround. Using Edge™ web browser to playback video content with a multi display system configuration may cause a system hang or crash after extended periods of use. Performance Metrics Overlay and Radeon WattMan incorrectly report higher than expected idle clock speeds on Radeon RX 5700 series graphics products. Performance and power consumption are not impacted by this incorrect reporting. Modifying the HDMI Scaling slider may cause FPS to become locked to 30. Some games may exhibit stutter intermittently during gameplay on Radeon RX 5000 series graphics products. Radeon RX Vega series graphics products may experience a system crash or TDR when performing multiple task switches using Alt+Tab. Desktop or In-game corruption may occur intermittently when HDR is enabled. Direct ML Media Filters are currently unavailable in Radeon Software Media gallery for video or image content. Some users may still experience black screen or system hang issues during extended periods of gameplay. AMD will continue to monitor and investigate reports of these issues closely. Some laptops may encounter a BSOD when installing Radeon™ Software Adrenalin 2020 Edition over an existing OEM graphics driver. To work around this issue, first uninstall the OEM graphics driver using Programs and Features within the Control Panel. Once complete, install the Radeon Software Adrenalin 2020 Edition package and select the Factory Reset option during setup.

Greetings and health to all ....What is shown in the image occurs when switching between window mode and full screen or vice versa.Several attempts must be made until it is normalized.AMD RX480 8 Gb.Driver: I have tried several and the same thing happens.I also use V4.5 without problems.

As they say over there: "good things make you wait" I prefer to wait for a stable and well-worked update than something done just to get out of trouble and say that it is already compatible with the P3D V5, which promises a lot but that its much-publicized output took one step behind the previous version in terms of stability it means. Not all developers communicate as detailed as PMDG about the steps they are taking, at least that's the feeling they generate. It is easy to understand that they could have had a release schedule but just look at everything that has happened with P3D V5 in just 2 weeks. That at the level of development and correction of errors is a brake. In particular, I am still waiting for the updates in due course and well debugged at the same time that LM does the same with the V5. Health for all ....

The 3600X specifications according to AMD indicate that the maximum temperature is 95 ° and your design has a thermal dissipation capacity of 95w, therefore you should not have any problem. If you want to be safer and taking what is indicated by @chock as a reference, in addition to cleaning I suggest, if possible, that they change the heatsink. Stocks do their job but there are many better ones such as Cooler Master, Thermaltake, etc. etc. And you will notice that you will have at least 8-10 ° C less. See next test:

We all hope so ... PD3 V5 promises good things. Hopefully LM will promote it "the beginning of many changes"

So it means that we are going back to the OOM problem of previous years with the difference that now the problem is VRAM and not RAM. I feel that we are still imprisoned within the 32 Bits in one way or another ...! Dawn and we'll see ...

Yes... i using with fsuipc6 and no problem...

I have the version 1.99 Build 19531.5629 and it works perfect with V5

The user community is the true Beta Tester. Just as they say that "each head is a world", then each user with their own equipment and configuration will be a Beta Tester. All the feedback we provide to LM will become improvements and we will be the beneficiaries ourselves.

ORBX > https://orbxsystems.com/forum/topic/191611-v5-mesh-problems-on-various-airports/

jaja... Report here: https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=137100&p=213950#p213950

Yes, same for me, random issue