roliflight

Hi Scotflieger, many thanks for quick answer I sign up if I needed a programming but first i have to buy have a good time roliflight

Hello, may question, there is the possibility, that linda also works with Goflight-Modules. For example GF-LGT-II Landing Gear and Trim Control. Thanks for answering roliflight

Hi Guenseli, thank you for answer, on the display I see “Nav on” and “Nav off” but wen I traced, there is no Lvar function. The normal autopilot is workimg. I think it is a problem with the phenom-configuration-tool. This tool allows to map a keyboard-key to such a Lvar-function. I will try it again if I have more time. For the first step i was gone the easy way and have programmed some fsuipc-mouse-macros. They are working fine. Thank you for helping Roli

Hello, i have a little problem, my Vrinsight combo doesn’t work with the airplane feelthere Phenom 100. May be, that my LVAR-Funktions are not correct, here an example I wrote. -- ## Lights ############### function Nav_Logo_on () LVarSet = "L:EmbNavLt" ipc.writeLvar(LVarSet, 1) -- LightSwitch () DspShow ("Nav", "on") end function Nav_Logo_off () LVarSet = "L:EmbNavLt" ipc.writeLvar(LVarSet, 0) -- LightSwitch () DspShow ("Nav", "off") end function Nav_Logo_toggle () if _t("L:EmbNavLt", 0) then Nav_Logo_on () else Nav_Logo_off () end end There are much more LVars example PhLdgTaxi, EmbPanelLt I don’t know why the Lvars wont not to work, maybe, there is a Configurator-Tool which allows to assign Lvars and Offsets to keyboard-presses. I think it blocked this functions. LUA.0: [5] Watching new LVar: AUTOTAXI = 0 LUA.0: flight not saved! LUA.0: flight not saved! LUA.0: All LVars watching request. Preparing... LUA.0: [5] All LVars watching started... LUA.0: [1] LVar: EmbNavLt = 0 LUA.O flight not saved! LUA.0: [L] LVar. EmbStrobeLt = 0 LUA.0: [L] LVar: EmbStrobeLt = 1 LUA.0: flight not saved! LUA.0: flight not saved! LUA.Or [L] LVar: EmbPanelLt = 1 LUA.0: [L] LVar. EmbPanelLt = 0 LUA.0: flight not saved! LUA.0: [L] LVar: PhLdgTaxi = 1 LUA.0: flight not saved! LUA.0: [L] LVar. PhLdgTaxi = 2 LUA.0: flight not saved! LUA.0: [L] LVaru PhLdgTaxi = 1 LUA.0: flight not saved! LUA.0: [L] LVar: PhLdgTaxi = 0 LUA.0: flight not saved! LUA.Or flight not saved! LUA.0: [L] LVar. EmbNavLt = 1 LUA.0: [1] LVar. EmbNavLt = 0 LUA.0: flight not saved! LUA.0: [L] 'Mar: ErjThrottlelLever = 85 LUA.0: [L] LVar: ErjThrottle2Lever = 85 Sim stopped: average frame rate for last 548 secs = 27.3 Another problem is, there are combinations off two or three offsets as shown . How can I convert this for Linda. (If I pressed the AP-button) 86339 LogOptions changed, now 20000000 00000001 792470 *** EUENT: Cntrl= 65561 (0x00010019), Param= 0 (0x00000000) PAUSE_TOGGLE 799896 *** EUENT: Cntrl= 65808 (0x00010110), Param= 0 (0x00000000) AP_ALT_HOLD_ON 799896 *** EUENT: Cntrl= 66036 {0x000101f4}, Param= 1441 <0x000005a1) AP_US_UAR_SET_ENGLISH 799896 *** EUENT: Cntrl= 65792 (0x00010100), Param= 1 (0x00000001) AUTOPILOT_ON 799958 *** EUENT: Cntrl= 66036 {0x000101f4}, Param= 1442 <0x000005a2) AP_US_UAR_SETENGLISH 799958 *** EUENT: Cntrl= 65817 (0x00010119), Param= 0 (0x00000000) AP_WING_LEUELER_OFF 800005 *** EUENT: Cntrl= 66036 {0x000101f4}, Param= 1442 <0x000005a2) AP_US_VAR_SETENGLISH 800067 *** EUENT: Cntrl= 66036 <0x000101f4), Param= 1443 <0x000005a3) AP_US_VAR_SET_ENGLISH 800130 *** EUENT: Cntrl= 66036 <0x000101f4), Param= 1443 <0x000005a3) AP_US_VAR_SETENGLISH 800208 *** EUENT: Cntrl= 66036 <0x000101f4), Param= 1444 (0x000005a4) AP_US_VAR_SET_ENGLISH 800254 *** EUENT: Cntrl= 66036 (0x000101f4), Param= 1444 <0x000005a4) AP_US_VAR_SETENGLISH 800379 *** EUENT: Cntrl= 66036 <0x000101f4), Param= 1445 <0x000005a5) AP_US_VAR_SET_ENGLISH 800442 *** EUENT: Cntrl= 66036 <0x000101f4), Param= 1445 <0x000005a5) AP_US_VAR_SETENGLISH 800504 *** EUENT: Cntrl= 66036 <0x000101f4), Param= 1446 (0x000005a6) AP_US_VAR_SET_ENGLISH 800598 *** EUENT: Cntrl= 66036 (0x000101f4), Param= 1446 <0x000005a6) AP_US_VAR_SETENGLISH 800644 *** EUENT: Cntrl= 66036 <0x000101f4), Param= 1447 <0x000005a7) AP_US_VAR_SET_ENGLISH 800691 *** EUENT: Cntrl= 66036 (0x000101f4), Param= 1448 <0x000005a8) AP_US_VAR_SETENGLISH Have somebody an idea Many thanks Roliflight

Hi Scotflieger, many thanks, the functions are working properly. Linda is a great software!!! another question, i want to build a panel with control-lights for AP, FD, Gear and so on. Linda is in a position, such a panel to operate? Many thanks an have a good time

Hallo, im am a newbee and i have a little problem, on the Vrinsight combo Airbus steyle is a little button named matric alt. I can not find a Linda control to activat this funktion. I have traced the LVars an found 2 LVars by pushing this button at FSX. AB_AP_Metric = 1 AB_AP_Metric = 0 AB_AP_Metric_REL = 1 AB_AP_Metric_REL = 0 I tried to write a funktion but the funktion did not work because i am not the great programmer. Can somebody help me and show me, how the funktion is correct. Excause my bad english. Many thanks roliflight