Mark Niebauer
-
Content Count
324 -
Donations
$0.00 -
Joined
-
Last visited
Posts posted by Mark Niebauer
-
-
I dont know. I havent solved it and Carenado wont help me on it. They said they couldnt duplicate it so they said pretty much good luck . . .
-
Thanks, I have never flown the real plane, so I wouldnt know. Carenado manuals dont discuss this.
-
I noticed this bird overspeeds easy. None of the detents seem correct. At cruise it overspeeds unless n1 is 94 or less. Is this a bug? overspeeds on the clb and TO detent as well. Anyone else experience this?
-
Ok, I'll try that. Thanks
-
Thanks for the reply but thats not the case. There must be a reliable procedure for this? Unless Carenado strikes again?
-
Heres what happens to me, I move lever for engine right to cutoff, then press the right start button. At about 20 N2, I move lever to idle. engine spools down, and I have to repeat a second time to get engines to fire up. What am I doing wrong?
-
I setup a chaseplane camera just for those levers. makes it much easier.
-
The Engine buttons do not illuminate. When N1 reaches about 20% after hitting the Start button, find the engine cut switch at the base of the power levers. Its not obvious. Click on it. then click on the power lever at top and it will move to idle position.. Now engine will start. Too bad there is no POH. Typical Carenado.
-
DOnt forget to click on the engine Cut switch first when starting engines, or they wont start. I usually hit the start button, then the fuel cut switch (at the base of the power levers) then move the levers to idle position. Then the engines will start.
-
7 hours ago, Jim Young said:I am not having any problems with websimconnect or SVS in P3Dv4 but welcome any additional improvements to the program.
Have you downloaded and installed the P3d V4.5 HF2 and its SDK? Its the SDK that broke it.
-
I just heard that Carenado has finally acknowledged the problem of SVS not working with the latest LM SDK. They forwarded the issue to websimconnect to be fixed. Finally!
-
6 hours ago, Juan Lopez said:Hi all, just made it work!!!! Only difference is that I selected FSX in the installer and not FSX Steam. Do not ask me why but it solved my issue !!! After 3 days of investigation. Hope it will solve yours.
No more Terr Err message and a fully functional SVS 🙂
Thanks all for your help and comments!!
Thats nice for you, but Im stuck with P3d. . . lol
-
Since I installed the P3D V4.5 SDK all my Carenado g1000's now have the Ter Err in the PFD and SVS stopped working. Some how the gauge is now broken. I submitted a ticket to them after trying everything I could find in forums. All they wanted to do at Carenado is offer me a refund??? lol How in the world does this company make money with that attitude??
-
17 hours ago, Jim Young said:In the manual (which you indicate is not installed yet) it states:
"SVS installation
By default,aircraft doesn ́t have SVS installed. In order to install it you have run the “SVS.exe” file. Just double click on this file to install it.The “SVS.exefile is located at the following folder:Sim\SimObjects\Airplanes\Carenado_C172SP_G1000"
First of all, did you download SVS from Carenado after purchasing? It is named SVS.zip. Unzip. They do not tell you to install this file (the developers of SVS, not Carenado). Run SVS.exe as an Admin. Enter email used for the purchase and SN. Choose which flightsim you want to install the product in. This install file is what is very confusing as the guide said SVS.exe would be located in the SimObjects\Airplanes\Carenado_C172SP_G1000. The install file is the same name as the name of the file in the G1000 folder. The file you download from Carenado was simply a method to get SVS registered with your e-mail address and serial number. It also installs SVS.exe in the C172SP\G1000 folder. This is the actual installation file as the guide states. Right click and run SVS.exe as an Admin. The installer will place the following entry in your dll.xml:
<Launch.Addon>
<Name>WebSimXML</Name>
<Disabled>False</Disabled>
<Path>.\WebSimBrowser\2.1\64\WebSimXML.dll</Path>
</Launch.Addon>For those who have SVS installed, it will only work in the C172SP. Any other aircraft you want it installed in, you have to uninstall and reinstall so it can have the gauge installed.
As stated in the manual, there is a firewall exception:
" Firewall exception
"On the first run, the Windows Defender/Firewall alert will pop up, asking to confirm the WebSimSVS.exe access to network. WebSimSVS.exe is local http server that communicates on port 4444 with the FSX/P3D through tcp/ip protocol on localhost ONLY. It is 100% secure and safe."
You may not see this as sometimes the pop up gets hidden behind the P3D Window. Also, the AVAST anti-virus program will block it from running. You will have to run exceptions for two executables in AVAST.
If you still have problems and get the TER ERROR, then Carenado has a recommendation - https://carenado.zendesk.com/hc/en-us/articles/115003010854-C172SP-SVS-TER-ERR
Lastly, the guide states your GPU may not be compatible- "TER FAILerror at start-up.When PFD alert shows TER FAIL alert during start it means your GPU or its driver is not suitable for SVS rendering. This is a case for some older GPU units (mainly AMD). You can try updating your GPU"
Hope this helps.
Jim
I appreciate your attempt to help. I tried all of this and so much more. Carenado just wanted to give me a refund and did not want to help. Im pretty sure its not SVS and is a problem with their 1000 gauge. But they refuse to acknowledge it nor find out why.
-
On 8/14/2018 at 5:14 AM, c172drvr said:Thank you JusticeAA! But we are forced to buy SVS to get rid of an error message?? Carenado should fix it. They have pretty aircraft but lots of system bugs that they don't seem to care about. This problem is not even in their knowledgebase.
I bought it and it still doesnt work. Carenado refused to help.
-
I still have this problem. Cant use SVS. worked great for a few years, now boom, dead. Carenado would help me.
-
Still not working. Dead here. Carenado wouldnt help.
-
Didnt work for me at all. Still have the error. Tried everything . . .
-
This didnt fix anything for me. . . Still have the error.
-
Tried all of it. Im 20yr IT. No help from Carenado. This seemed to start after I updated to the P3d 4.5 SDK . .
-
I have Carenado SVS installed and it still does not work! Carenado said that it was my fault and they would not support it any further. Whats wrong with these people?
-
On 1/12/2020 at 12:56 PM, Mark Niebauer said:Has anyone found a fix for this yet?
Carenado Tech support just passed the blame on me and send they would give me a refund . . . Figures. They really dont want to provide support for this thing!
-
Has anyone found a fix for this yet?
-
The old one
FS2Crew and P3D v5
in FS2CREW: GENERAL FORUM
Posted
I have it installed but FS2 crew errrors out and looks for the P3d v4 when I try to enable it. Got PMDG to work in V5